NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 77
Calling Station Number Display C-32
C-32   Calling Station Number Display
General Description
This feature provides hospitality service stations (restaurant, valet, room service, etc.) and guest stations with an
LCD display of incoming calling number (Guest, Administration, OG, or IC trunk). This display flashes while the
call is ringing, then appears steadily when the call is answered. D
term may be used for service stations....

NEAX2400 IMX Hotel Feature Programming Manual
Page 78ND-70284 (E), Issue 2
C-32 Calling Station Number Display
Operating Procedure (cont’d)
Service Conditions
1. When a call terminates to a line other than the prime line, the LCD displays the incoming station as
determined by LINE PRESELECTION – Dterm [L-9D].
2. LINE PRESELECTION – D
term [L-9D] is governed by a timer. After the timer times out, the display
returns to TIME DISPLAY – Dterm [T-18D].
3. The display will show either RMO (Room Out) and the...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 79
Calling Station Number Display C-32
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
78b
0Calling and Intermediate Station Number indication (Dterm and Console)
0/1 = Out/In Service (Always assign “1”.)
b
1Kind of Service Class indication (Dterm)
0/1 = Out/In Service (Always assign “1”.)
b
2Not used
b
3
b4Fixed “0”
b
5Name Display Service
0/1 = Out/In Service
b
6Not used
b
7 

NEAX2400 IMX Hotel Feature Programming Manual
Page 80ND-70284 (E), Issue 2
C-71 Called Number Display – Hotel Attendant Console
C - 7 1   C a l l e d  N u m b e r  D i s p l a y  –                                           
Hotel Attendant Console
General Description
If a call is transferred to the Console as a result of such features as:
DO NOT DISTURB [D-11]
CALL FORWARDING – ALL CALLS [C-5]
CALL FORWARDING – BUSY LINE [C-2]
CALL FORWARDING – DONT ANSWER [C-3]
CALL FORWARDING – INTERCEPT/ANNOUNCEMENT...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 81
Called Number Display – Hotel Attendant Console C-71
Service Conditions
1. This feature is effective when a station-to-station call or a DID call has been routed to an Console as a
result of DO NOT DISTURB [D-11], CALL FORWARDING – ALL CALLS [C-5], CALL
FORWARDING – BUSY LINE [C-2], CALL FORWARDING – DONT ANSWER [C-3], or CALL
FORWARDING – INTERCEPT/ANNOUNCEMENT [C-25], and is answered by the Attendant.
2. If the Attendant...

NEAX2400 IMX Hotel Feature Programming Manual
Page 82ND-70284 (E), Issue 2
C-71 Called Number Display – Hotel Attendant Console
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
70b
0Called Number Display when Call Forwarding to Console
0/1 = Out/In Service
b
1Flashing display of Line Lockout on Console BLF
0/1 = In/Out Service
b
2Route No. Display on Console
b
3
b4One digit dialing instead of SHF (DP TEL only)
0/1 = Not Required/Required
b
5
Priority order for answering via ANSWER key
0 =...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 83
Called Number Display – Hotel Attendant Console C-71
3AHSY
INDEX 
110b
0
Room key Interface
0: Interface is absent (STAY/OUT is displayed)
1: Interface is present (Key status is displayed)
b
1Hotel–ATT Guest Information Service
0/1 = Not Required/Required
b
2Not used
b
3Called Number Display on the Hotel Console
0/1 = Out/In Service
b
4
Not used b5
b6
b7Guest Name Display–Dterm, Guest Information Display–Dterm/PMS Terminal
0/1 =...

NEAX2400 IMX Hotel Feature Programming Manual
Page 84ND-70284 (E), Issue 2
C-72 Connecting Room Service
C-72   Connecting Room Service
General Description
This feature allows the PMS to connect two rooms on a temporary basis to act as one room. One room will act as
the master room and the other to act as a secondary room. If suite rooms are to be connected, the master station in
the suite room arrangement is used for connecting room purposes.
Operating Procedure
CONNECTING ROOM SERVICE assignment is made...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 85
Connecting Room Service C-72
Service Conditions (cont’d)
13. When the Console dials the master station, the DSS keys and lamps are used in the operation. The status
of the connecting room phones appear on the DSS lamps. Ringing is generated at the connecting room
phones when the first DSS key is pressed or the START key is pressed. If a secondary phone DSS key is
pressed, only the corresponding secondary phone will ring. The DSS...

NEAX2400 IMX Hotel Feature Programming Manual
Page 86ND-70284 (E), Issue 2
C-72 Connecting Room Service
2AHSY
INDEX 
111b
0Fixed Data
b
1
b2Not used
b
3
Setting of Message Registration Data to be sent out to the PMS
b
4b3 
0 0 : The pilot number is sent out in the case of Suite Room; the Main Room 
Station Number is sent out in the case of Connecting Room.
0 1 : The station Number of each station within the room is sent out. b
4
b5Not used
b
6
b7Connecting Room
0/1 = Out/In Service
3AHSY
INDEX
185b
0Not...