NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 87
Connecting Room Service C-72
5AHSY
INDEX
189b
0
Not used b
1
b2
b3
b4
b5
Suite Room Individual Station Calling
0 = A Suite Room individual station can be called from a Guest Station, Administration 
Station, and Console.
1  =  A Suite Room individual station can be called from a Special Administration Station 
and Console.
b
6
Ringing at time of general calling in the Connecting Room or Suite Room stations
0  = Ringing all...

NEAX2400 IMX Hotel Feature Programming Manual
Page 88ND-70284 (E), Issue 2
C-147 Call Information Display
C-147 Call Information Display
General Description
This feature allows the following information to be displayed on the guest room Dterms LCD. Dterm may be used for
guest stations.
Calling/Called Station
AUTOMATIC WAKE-UP – D
term[A-10D]
ALERT SERVICE [A-57]
DO NOT DISTURB – D
term[D-11D]
DIRECT DATA ENTRY – STATION [D-107]
MESSAGE WAITING [M-6]
MAID STATUS [M-22]
ROOM CUTOFF [R-9]
2ND WAKE-UP CALL –...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 89
Call Information Display C-147
Operating Procedure (cont’d)
e.) During a call through Tie line in progress:
- OR -
2. For other display services, see each service feature description.
Service Conditions
1. When the guest name two-line display is provided by the system parameters, the time display (lower line)
disappears during a call.
2. When originating a call using the ISDN terminal, the charging information is not displayed....

NEAX2400 IMX Hotel Feature Programming Manual
Page 90ND-70284 (E), Issue 2
D-11 Do Not Disturb
D-11   Do Not Disturb
General Description
This feature allows the Console, PMS terminal, Front Desk Terminal, Special Administration Station, or Guest
Station to temporarily place individual stations into a mode that blocks incoming calls. Outgoing calls may still be
placed from stations in DO NOT DISTURB (DND) mode.
Operating Procedure
To set DO NOT DISTURB from the Console or Front Desk Terminal:
To cancel...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 91
Do Not Disturb D-11
General Description (cont’d)
To cancel DO NOT DISTURB from Special Administration Station:
To set DO NOT DISTURB from guest stations:
To cancel DO NOT DISTURB from guest stations:
To obtain a printout of stations in the DO NOT DISTURB state, refer to the AUDIT REPORTS [A-26] feature
description.
Note:
For the Console and Front Desk Terminal only:
If an error is made in the course of key operations, press...

NEAX2400 IMX Hotel Feature Programming Manual
Page 92ND-70284 (E), Issue 2
D-11 Do Not Disturb
Service Conditions (cont’d)
6. DO NOT DISTURB is provided for guest room stations only.
7. When a station in a suite sets DO NOT DISTURB, all stations in that suite are placed in the DND mode.
8. Station in DND mode can receive calls from specific trunk routes or stations through system data
assignment.
9. Guest “Boss” and “Secretary” rooms override DND mode for calls between assigned stations.
10. When setting...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 93
Do Not Disturb D-11
3SYS1
ASYD
INDEX 
162b
0Destination of connection when a connection between guest stations is restricted.
b
1
b2Destination of connection when Room Cutoff is assigned.
b
3
b4Assignment of destination for Do Not Disturb.
b
5
b6Tone to be given when a wake-up call is answered.
b
7
4SYS1
ASYD
INDEX
170b
0Room status data (b2, b1, b0) to be set at the time of Checkout
Note:
Do not assign other data. b
1
b2
b3...

NEAX2400 IMX Hotel Feature Programming Manual
Page 94ND-70284 (E), Issue 2
D-11 Do Not Disturb
5SYS1
ASYD
INDEX
172b
0Message Waiting
Data transfer to/from PMS 
when executing the service.
0/1 = Not to be executed/To be 
executed b
1Message Registration
b
2Do Not Disturb, Room Cutoff
b
3Room Status
b
4Automatic Wake up, Group Announcement
b
5Room Change, Room Swap
b
6Room Data Change
b
7Not used
6AHSY
INDEX
139b
0Not used
b
1
b2MW Lamp Indication of “Do Not Disturb”
0/1 = Lights Steadily/Flashes
b
3MW...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 95
Do Not Disturb D-11
8AHSY
INDEX
376b
0Not usedText sent to PMS printout
0/1 = Not Required/Required
If “1” is assigned to the 
corresponding bit, the text is 
output to the Hotel printer.
Note:
When a failure has 
occurred to a data link 
between the NEAX2400 
IMX and the PMS, the 
pertaining error 
information is printed 
out. b
1Maid Status – Guest (Feature Code = 11)
b
2Maid Status – Admin. (Feature Code = 12)
b
3Message...

NEAX2400 IMX Hotel Feature Programming Manual
Page 96ND-70284 (E), Issue 2
D-11D Do Not Disturb - Dterm
D-11D   Do Not Disturb - Dterm 
General Description
This feature allows a guest room Dterm to temporarily block incoming calls. Outgoing calls may still be placed from
stations in DO NOT DISTURB (DND) mode.
Operating Procedure
To set DO NOT DISTURB from guest room Dterms:
To cancel DO NOT DISTURB from guest room Dterms:
To obtain a printout of stations in DO NOT DISTURB state, refer to the AUDIT...