NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 37
Automatic Wake-Up DtermA-10D
10AHSY
INDEX 
105b
0Not used
b
1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4Wake-Up Time Indication on Hotel Console
 0/1 = 24-hour/12-hour system
b
5Not used
b
6
b7Guest Name Display on Console
0/1 = Interface Type Model 60, 90, 120/Model 90, 120
11AHSY
INDEX 
142b
0
Not used b1
b2
b3
b4Wake-Up call “Busy” condition; transfer to Console.
0/1 = Out/In Service
b...

NEAX2400 IMX Hotel Feature Programming Manual
Page 38ND-70284 (E), Issue 2
A-10D Automatic Wake-Up Dterm
14AHSY
INDEX 
401Daily Printout Minute
“Minute” data is assigned using a decimal number (Military Time).
Example:2:00 a.m. – This data is entered as 00.
Example:2:30 p.m. – This data is entered as 30.
15AHSY
INDEX 
402b
0Not used
b
1Wake-Up Result (Answer) Printout
0/1 = Out/In Service
b
2
Not used b
3
b4
b5
b6
b7
STEP CMND EXPLANATION
16AANP 
or
AGNPAssign the Number of Necessary Digits for the first...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 39
Automatic Wake-Up DtermA-10D
23 ARSCRelease the Call restrictions between the RSC of the station accessing the announcement unit and the 
route of the trunk assigned in ATRK.
(RRI = 2.3)
24 AAEDAssign the Data to the announcement unit number and the route data, etc. assigned in ATRK. Assign 
the information with respect to the following: STEP CMND EXPLANATION
EQP = 16: Automatic Wake-Up Set
EQP = 18: Automatic Wake-Up Cancel
EQP...

NEAX2400 IMX Hotel Feature Programming Manual
Page 40ND-70284 (E), Issue 2
A-15 Announcement Service
A-15 Announcement Service
General Description
This service feature allows a station user to hear a prerecorded announcement for various services such as:
ALERT SERVICE  [A-57]
AUTOMATIC WAKE-UP  [A-10]
Confirmation announcement (See AUTOMATIC WAKE-UP)  [A-10]
DO NOT DISTURB  [D-11] mode setting
GROUP SERVICE THROUGH PMS  [G-4]
Hotel information
Intercept announcement when a vacant level is dialed
Language...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 41
Announcement Service A-15
Assignment Procedure
STEP CMND PROCEDURE
1AANP
or
AGNPAssign minimum necessary number of digits for the first number of the Announcement Service 
Access Code
2AASP
or
AGSPAssign the access code to the announcement unit number.
3ARTDAssign the route data of the trunk which interfaces with the announcement unit.
(LSG = 5, TCL = 4)
4 ARTD Assign the trunk interfacing with the announcement unit.
5 MBTK...

NEAX2400 IMX Hotel Feature Programming Manual
Page 42ND-70284 (E), Issue 2
A-25 Attendant Console With Hotel Functions
A-25   Attendant Console With Hotel Functions
General Description
The NEAX2400 IMX Console provides regular business call handling and processing capabilities, as well as
hospitality functions. The console provides for the following special hospitality services:
1. Individual keys to set and reset:
AUTOMATIC WAKE-UP [A-10]
MESSAGE WAITING [M-6]
CHECK-IN/CHECKOUT [C-23]
DO NOT DISTURB...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 43
Attendant Console With Hotel Functions A-25
General Description (cont’d)
Note:
If the Desk Console is used instead of the NEAX2400 IMX Hotel Attendant Console, the basic key allocations are
different from the previous ones. The following illustration shows the Desk Console key positions and indications used
in hotel system. The operating procedures for each service are the same as the NEAX2400 IMX Hotel Attendant
Console.
Figure...

NEAX2400 IMX Hotel Feature Programming Manual
Page 44ND-70284 (E), Issue 2
A-25 Attendant Console With Hotel Functions
Service Conditions (cont’d)
4. The OAI name of the Administration station is displayed on the character display (guest name display
area) when Name Display service via OAI is available in the NEAX2400 IMX system. When there is no
name assigned for the Administration station, “ADM STATION” is displayed.
Assignment Procedure 
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 9
Number of Consoles...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 45
Attendant Console With Hotel Functions A-25
3SYS1
ASYD
INDEX 
64b
0
µ law/A law for TDSW
0 = µ law (Japan, North America, Canada, and Hong Kong)
1 = A law (Europe, other nations)
b
1Display of Call Waiting Lamp (on Console) service
0 0 = When PA lamp illuminates
0 1 = When busy lamp field is not displayed
10=Always
11=– b
2
b3Howler Tone Sending Service
0 0 = Out of Service
0 1 = Send one time only
1 0 = Repeat every 30 sec....

NEAX2400 IMX Hotel Feature Programming Manual
Page 46ND-70284 (E), Issue 2
A-25 Attendant Console With Hotel Functions
5SYS1
ASYD
INDEX 
77b
0Day/Night mode change via the Console handset jack
0/1 = Not Required/Required
b
1Not used
b
2MW Refresh 0/1 = Required/Not Required
Note:
When message Waiting Lamp is provided, this data should be assigned “0”.
b
3Service Module Interface 0/1 = Required/Not Required
b
4Module in that PFT card is mounted
PIM (Always assign “11”.)
b
5
b6Not used
b
7
6SYS1
ASYD
INDEX...