NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 17
Automatic Wake-Up A-10
Operating Procedure (cont’d)
b.) If the wake-up time is entered after the guest line is released:
To cancel AUTOMATIC WAKE-UP from the Front Desk Terminal or Console using the WUS/WUR (Wake-Up 
Set/Wake-Up Reset) key:
a.) When guest calls to cancel a wake-up call (see DIRECT SERVICE SET/RESET [D-25]):
b.) If the wake-up cancel is input after the guest line is released:
To call the guest station that does...

NEAX2400 IMX Hotel Feature Programming Manual
Page 18ND-70284 (E), Issue 2
A-10 Automatic Wake-Up
Service Conditions
1. From the Front Desk Terminal or Console, set AUTOMATIC WAKE-UP using either 24-hour time, or
12-hour time. When using 12-hour time, time is entered by dialing a special code, which includes either a
# or * before entering the time to indicate PM. For example, when dialing the desired time, dial #1030 for
10:30 PM. The choice of # or * is assigned in system data.
2. The maximum number of...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 19
Automatic Wake-Up A-10
Service Conditions (cont’d)
13. For guest stations, a confirmation announcement can be provided instead of service set tone for
AUTOMATIC WAKE-UP setting and cancelling operations.
14. AUTOMATIC WAKE-UP entry and result information is reported, as required, to the PMS and
NEAX2400 IMX hotel printer for continuous update.
15. A maximum of six digits can be used for the identification code. Use of an ID code...

NEAX2400 IMX Hotel Feature Programming Manual
Page 20ND-70284 (E), Issue 2
A-10 Automatic Wake-Up
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
161b
0Don’t Disturb Override key on Console
0/1 = Out/In Service
b
1Message Waiting Service
0/1 = Out/In Service
b
2Language Service
0/1 = Out/In Service
b
3Split Hold Service
0/1 = Out/In Service
b
4Not used
b
5DSS (Direct Station Section) Key on Console
0/1 = Ineffective/Effective
b
6Timing Start using “#” Code
0/1 = Ineffective/Effective
b...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 21
Automatic Wake-Up A-10
3SYS1
ASYD
INDEX
163b
0Over Time Call timer.
b
1
b2Over Time Call
0/1 = Out/In Service
b
3Over Time Call indication
0/1 = On Console/Hotel Printer
b
4Step Call from Guest Station is allowed
0/1 = Out/In Service
b
5Tone type for Maid Dialing     
Note:
Guest Station is available. Administration Station receives only SST. b
6
b7Start time of Automatic Wake-Up Call
0/1: On time/5 min. before
4SYS1
ASYD
INDEX...

NEAX2400 IMX Hotel Feature Programming Manual
Page 22ND-70284 (E), Issue 2
A-10 Automatic Wake-Up
5SYS1
ASYD
INDEX 
165b
0Port Number of connecting the Hotel Printer Command Service
b
1
b2
b3Hotel Printer Command Service
0/1 = Not Required/Required
b
4Automatic Wake-Up – Hotel Attendant Assistant
0/1 = Out/In Service
b
5Wake-Up Guest Station Priority Service
 0/1 = Not Provided/Provided
b
6Wake-Up information (time, station number, etc.) printout
0/1 = Out/In Service
b
7Floor Service
0/1 = Out/In...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 23
Automatic Wake-Up A-10
8AHSY
INDEX 
100
(Note)b
0Number of times of Wake-Up Answer Retry.
b
1
b2Number of characters of language information display
0/1 = 4 characters/2 characters
b
3Restriction for hooking when a guest station has originated an outgoing C.O. line call.
0/1 = Not Required/Required
b
4Type of STA for Overtime Call

00:- 10: Administration STA only
01: Guest STA only 11: Both (Administration and Guest STA)

00:-...

NEAX2400 IMX Hotel Feature Programming Manual
Page 24ND-70284 (E), Issue 2
A-10 Automatic Wake-Up
10AHSY
INDEX 
142b
0
Not used b1
b2
b3
b4Wake-Up call “Busy” condition; transfer to Console
0/1 = Out/In Service
b
5Wake-Up call “Don’t Answer” condition; transfer to Console
0/1 = Out/In Service
b
6Wake-Up call “Block” condition; transfer to Console
0/1 = Out/In Service
b
7Wake-Up call for VIP Busy/Block condition; transfer to Console
0/1 = Out/In Service
11AHSY
INDEX 
163b
02nd Wake-Up Call Service
0/1 =...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 25
Automatic Wake-Up A-10
14AHSY
INDEX 
402b
0Not used
b
1Wake-Up Result (Answer) Printout
0/1 = Out/In Service
b
2
Not used b
3
b4
b5
b6
b7
15
AHSY
INDEX 
406Specific end time, when the system will stop scanning rooms for pending wake-up 
information.
Hour data is assigned using a decimal number (military time).
Example:
 8:00 a.m. - Data entered is 08
Example:
 8:30 p.m. - Data entered is 20
16
AHSY
INDEX 
407Specific end time,...

NEAX2400 IMX Hotel Feature Programming Manual
Page 26ND-70284 (E), Issue 2
A-10 Automatic Wake-Up
21 ARTKAssign the trunk interfacing with the announcement unit.
20 MBTKRelease the Make Busy of the trunk assigned in ATRK.
23 ARSC
Release the Call restrictions between the RSC of the station accessing the announcement unit 
and the route of the trunk assigned in ATRK.
(RRI = 2.3)
24 AAED
Assign the Data to the announcement unit number and the route data, etc. assigned in ATRK. 
Assign the information with...