NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page v
NEAX2400 IMX Hotel Features 
LEGEND
X – Available
— – Not Applicable
N – Not Available
→
→→ →– Feature carried over to next software series
Index Feature DescriptionSeries 7300 Series 7400
Non-
NetworkFCCSNon-
NetworkFCCS
A-10Automatic Wake-UpXX→→
A-10D
Automatic Wake-Up DtermXX→→
A-15Announcement ServiceX—→—
A-25Attendant Console With Hotel FunctionsXN
→N
A-26Audit ReportsXX
→→
A-48Automatic Message Waiting Lamp OffXX→→
A-57Alert...

NEAX2400 IMX Hotel Feature Programming Manual
Page viND-70284 (E), Issue 2
D-107Direct Data Entry – StationXN→N
D-150Double Suite RoomXN
→N
D-151DND/MW Lamp ControlXX
→→
E-21Emergency Call Monitor – AttendantXN→N
G-1Guest/Administrative ServiceXX
→→
G-4Group Service Through PMSXX→→
G-5Guest Name Display Through PMSXX→→
G-6D
Guest Name Display – DtermXX→→
G-7D
Guest Information Display – DtermNNNN
G-8Guest Information Display – Hotel Attendant ConsoleXN
→N
G-9Guest Information Display – PMS TerminalXN
→N...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page vii
R-17Room NumberingX—→—
S-17Split AccessXX
→→
S-32Screening (Split Hold)XN→N
S-49Service Call RoutingXX
→→
S-74Secretarial Service – Guest StationXN→N
S-75Suite Room ServiceXX
→N
S-1282nd Wake-up Call – Same Guest StationXX
→→
T-13Toll Terminal AccessXX→→
T-21Timing StartXX→→
V-16Voice Mail Service Via Message Center Interface (MCI)XX→→
W-2Wake-up Announcement – HeadstartXN→N
NEAX2400 IMX Hotel Features (Continued)
LEGEND
X –...

NEAX2400 IMX Hotel Feature Programming Manual
Page viiiND-70284 (E), Issue 2
This page is for your notes. 

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 1
INTRODUCTION
CHAPTER 1 INTRODUCTION
General Description
This manual covers the Office Data Design of the Hotel System, the Numbering Plan and a description of Service
features.
How to Follow the Manual
This manual is organized as follows:
 CHAPTER 2 - NUMBERING PLAN
This chapter explains the numbering plan in the hotel system.
 CHAPTER 3 - DESCRIPTION OF SERVICE FEATURES
This chapter explains how to use the hotel service features. 

NEAX2400 IMX Hotel Feature Programming Manual
Page 2ND-70284 (E), Issue 2
This page is for your notes. 

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 3
NUMBERING PLAN
CHAPTER 2 NUMBERING PLAN
General Description
Access Codes for various service features are determined according to the Dial Access Numbering Plan. This
chapter explains the Numbering Plan, and commands related to the Numbering Plan in the Hotel System.
Dial Access Numbers
There are three types of Dial Access Numbers:
Station Access Numbers
Special Service Access Numbers
Trunk Access Numbers
This section explains...

NEAX2400 IMX Hotel Feature Programming Manual
Page 4ND-70284 (E), Issue 2
NUMBERING PLAN
Basic Knowledge of Dial Access Numbers (cont’d)
Dial Access Number for Guest Station
Note:
For the Access Level (1st digit of the Dial Access numbers) different numbers are assigned for Station Access numbers,
Special Service Access numbers, and Trunk Access numbers.
Station Access Numbers
a.) One through six-digit station numbers are supported.
b.) The system can provide Timing Start Service. The Timing Start...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 5
NUMBERING PLAN
Special Service Access Numbers (cont’d)
Examples:
Guest Station on the 1st Floor of the main building
dial “7” Calling
→ Room Service Station (STN 4801) on the 1F
Guest Station on the 2nd Floor of the main building
dial “7”
→ Calling Room Service Station (STN 4802) on the 2F
Guest Station on the 3rd Floor of the main building
dial “7”
→ Calling Room Service Station (STN 4803) on the 3F
d.) Table 2-1 shows a listing...

NEAX2400 IMX Hotel Feature Programming Manual
Page 6ND-70284 (E), Issue 2
NUMBERING PLAN
a.) Trunk Access numbers are required on an individual route basis.
b.) When Least Cost Routing (LCR) is utilized, LCR Access is regarded as access to an individual
route; therefore an Access Number must be assigned.
c.) If Answer Service is provided for Speaker and/or Radio Paging, a Paging Answer code must be
assigned.
Examples of a Dial Access Numbering Plans are shown in Table 2, Example of Dial Access
Numbering...