NEC Neax 2400 Imx Hotel Feature Programming Manual
Here you can view all the pages of manual NEC Neax 2400 Imx Hotel Feature Programming Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 41
NEAX2400 IMX Hotel Feature Programming Manual ND-70284 (E), Issue 2 Page 27 Automatic Wake-Up DtermA-10D A-10D Automatic Wake-Up Dterm General Description This service feature allows the system to be programmed to automatically call guest rooms at specified times. Upon answering, the guest is connected to a recorded announcement or music source. A printout of unanswered, blocked, or busy wake-up attempts for guest rooms is provided at the Hotel printer. This feature can be activated from the guest room...
Page 42
NEAX2400 IMX Hotel Feature Programming Manual Page 28ND-70284 (E), Issue 2 A-10D Automatic Wake-Up Dterm Operating Procedure (cont’d) b.) When set and cancel codes are the same: To cancel AUTOMATIC WAKE-UP from a guest room Dterm (24-hour time only): a.) With separate set and cancel codes: b.) When set and cancel codes are the same: StepActionResult 1 Lift the handset or press the SPKR key. Receive dial tone. 2Dial WAKE-UP code.Hear Special Dial Tone. 3Dial desired time of AUTOMATIC WAKE-UP.Hear...
Page 43
NEAX2400 IMX Hotel Feature Programming Manual ND-70284 (E), Issue 2 Page 29 Automatic Wake-Up DtermA-10D Service Conditions 1. From the guest room Dterm, set AUTOMATIC WAKE-UP using 24-hour time only. 2. When AUTOMATIC WAKE-UP is executed, the LCD will display: 3. When the D term answers the wake-up call, “WAKE UP” display will remain. 4. The maximum number of stations that can set the same wake-up time can be assigned as one of the following: 64, 128, 256, 512 stations per LP (Local Partition) depending...
Page 44
NEAX2400 IMX Hotel Feature Programming Manual Page 30ND-70284 (E), Issue 2 A-10D Automatic Wake-Up Dterm Service Conditions (cont’d) 12. When AUTOMATIC WAKE-UP is set from the Administration Station, Front Desk Terminal, or Console, the LED for AUTOMATIC WAKE-UP on the guest room Dterm illuminates. If the AUTOMATIC WAKE-UP time steady display is available, the following will display: 13. If PMS Language Selection is used, AUTOMATIC WAKE-UP announcements can be provided according to a guest’s language....
Page 45
NEAX2400 IMX Hotel Feature Programming Manual ND-70284 (E), Issue 2 Page 31 Automatic Wake-Up DtermA-10D Service Conditions (cont’d) Example: a.) When setting DO NOT DISTURB – Dterm only: b.) When setting DO NOT DISTURB – D term and AUTOMATIC WAKE-UP – Dterm: c.) When setting DO NOT DISTURB – D term, AUTOMATIC WAKE-UP – Dterm and MESSAGE WAITING: d.) When setting DO NOT DISTURB – D term, AUTOMATIC WAKE-UP – Dterm, MESSAGE WAITING and 2ND WAKEUP CALL – SAME GUEST STATION (MW lamp illuminates): In case of...
Page 46
NEAX2400 IMX Hotel Feature Programming Manual Page 32ND-70284 (E), Issue 2 A-10D Automatic Wake-Up Dterm Service Conditions (cont’d) e.) When setting DO NOT DISTURB – Dterm, AUTOMATIC WAKE-UP – Dterm, MESSAGE WAITING, 2ND WAKEUP CALL – SAME GUEST STATION and ROOM CUTOFF (the MW lamp illuminates): f.) When going on-hook at the status of “e” after AUTOMATIC WAKE-UP – D term is activated (the MW lamp illuminates): g.) When cancelling 2ND WAKEUP CALL – SAME GUEST STATION at the status “e” (the MW lamp...
Page 47
NEAX2400 IMX Hotel Feature Programming Manual ND-70284 (E), Issue 2 Page 33 Automatic Wake-Up DtermA-10D Assignment Procedure STEP CMND BIT EXPLANATION 1SYS1 ASYD INDEX 161b 0Don’t Disturb Override key on Console 0/1 = Out/In Service b 1Message Waiting Service 0/1 = Out/In Service b 2Language Service 0/1 = Out/In Service b 3Split Hold Service 0/1 = Out/In Service b 4Not used b 5DSS (Direct Station Section) Key on Console 0/1 = Ineffective/Effective b 6Timing Start using “#” Code 0/1 =...
Page 48
NEAX2400 IMX Hotel Feature Programming Manual Page 34ND-70284 (E), Issue 2 A-10D Automatic Wake-Up Dterm 3SYS1 ASYD INDEX 163b 0Overtime Call timer. b1 b2Overtime Call 0/1 = Out/In Service b 3Overtime Call indication 0/1 = On Console/Hotel Printer b 4Step Call from Guest Station is allowed 0/1 = Out/In Service b 5Tone type for Maid Dialing b 6 b7Start time of Automatic Wake-Up Call 0/1: On time/5 min. before 4SYS1 ASYD INDEX 164b 0Number of Digits of all Hotel ID Code b 1 b2 b3 ID Code for...
Page 49
NEAX2400 IMX Hotel Feature Programming Manual ND-70284 (E), Issue 2 Page 35 Automatic Wake-Up DtermA-10D 5SYS1 ASYD INDEX 165b 0Port Number of connecting the Hotel Printer Command Service b 1 b2 b3Hotel Printer Command Service 0/1 = Not Required/Required b 4Automatic Wake-Up – Hotel Attendant Assistant 0/1 = Out/In Service b 5Wake-Up Guest Station Priority Service 0/1 = Not Provided/Provided b 6Wake-Up information (time, station number, etc.) printout 0/1 = Out/In Service b 7Floor Service 0/1 = Out/In...
Page 50
NEAX2400 IMX Hotel Feature Programming Manual Page 36ND-70284 (E), Issue 2 A-10D Automatic Wake-Up Dterm 8AHSY INDEX 77b 0LCD Indication of Wake-Up time on the Dterm 0/1 = -/Remains lit b 1LCD Indication of “DD” (Do Not Disturb) on the Dterm 0/1 = -/Remains lit b 2LCD Indication of “RC” (Room Cutoff) on the Dterm 0/1 = -/Remains lit b 3LCD Indication of 2nd Wake-Up time on the Dterm 0/1 = -/Remains lit b 4 Not used b5 b6 b7 9AHSY INDEX 100 (Note)b 0Number of times of Wake-Up Answer Retry b 1 b2Number of...