NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 127
Emergency Call Monitor – Attendant E-21
Assignment Procedure
STEP CMND EXPLANATION
1SYS1
ASYD
INDEX
9Number of Consoles
Max. 4 per PIM
STEP CMND BIT EXPLANATION
2SYS1
ASYD
INDEX
15b
0
Number of Trunk Group (TG) Busy Lamps on Console
0 = Out of Service
1–F = Number of Trunk Groups (1 – 10) b1
b2
b3
b4
Not used b5
b6
b7
3SYS1
ASYD
INDEX
68b
0Operating method for busy station service (Call back, Executive Right of Way, etc.)
0/1 =...

NEAX2400 IMX Hotel Feature Programming Manual
Page 128ND-70284 (E), Issue 2
E-21 Emergency Call Monitor – Attendant
4SYS2
ASYD
INDEX
0b
0Restriction Data of Station Busy Services can be designated as indicated below:
R: Restricted   A: Allowed
b1
b2Not used
b
3Attendant Override service
0/1 = Out/In Service
b
4Busy Verification (Console) service
0/1 = Out/In Service
b
5
Not used b6
b7
5ASYD 
SYS 1 
INDEX 
172b1
Message registration (SMDR) information sent to/from PMS.
0/1 = No/Yes (Note 1)
6AHSY
INDEX...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 129
Emergency Call Monitor – Attendant E-21
Note 1:
These steps are not required if the call to 911 service does not print to the hotel printer.
Note 2:
The number entered will automatically print on the hotel printer when the call is completed. (Trunk is released and
SMDR is output.) This works in conjunction with AHSY Index 183, bit 6. SMDR must be in service.
8AHSY 
360b
0Special Number Message Registration Entry
Block 1
First...

NEAX2400 IMX Hotel Feature Programming Manual
Page 130ND-70284 (E), Issue 2
G-1 Guest/Administrative Service
G-1   Guest/Administrative Service
General Description
This feature enables stations to be classified as guest stations and administration stations, and to use the respective
numbering plan. This allows a guest station to call an Administration Station by using a feature access code.
Operating Procedure
No manual operation is required.
Service Conditions
1. Calls between two Administration...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 131
Group Service Through PMS G-4
G-4 Group Service Through PMS
General Description
Group service information is entered via the PMS and forwarded to the NEAX2400 IMX for storage. This enables
the Console, or predetermined Special Administration Stations, to activate various ANNOUNCEMENT
SERVICES [A-15] on a group basis. Ten different types of announcements can be provided for group service.
System limitations are as follows:
64...

NEAX2400 IMX Hotel Feature Programming Manual
Page 132ND-70284 (E), Issue 2
G-4 Group Service Through PMS
Operating Procedure (cont’d)
To set from the Console:
To cancel from the Console:
Service Conditions
1. The PMS must be able to supply the NEAX2400 IMX with group service information. This information
is entered from the PMS terminal and forwarded to the NEAX2400 IMX.
2. This feature requires a Digital Announcement Trunk (DAT) package.
3. All announcement times are to be set per group at...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 133
Group Service Through PMS G-4
Service Conditions (cont’d)
8. Group Wake-Up Announcements can be arranged as AUTOMATIC WAKE-UP [A-10] or WAKE-UP
ANNOUNCEMENT – HEADSTART [W-2]. When Group Wake-Up Announcements are executed and
answered, if the D
terms are used for the guest stations in a group, the LCDs display as below (only when
announcement type code is 0):
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
160b...

NEAX2400 IMX Hotel Feature Programming Manual
Page 134ND-70284 (E), Issue 2
G-4 Group Service Through PMS
Note:
Group assignment and Group Code assignment are executed at PMS terminal. 3SYS1
ASYD
INDEX 
168b
0Group Announcement Service through PMS
0/1 = Out/In Service
b
1Audit Reports (for Hotel system)
0/1 = Out/In Service
b
2Not used
b
3
b4Off-Hook Alarm (service)
0/1 = Out/In Service
b
5Destination for Off-Hook Alarm Termination
0/1 = Console/Station
b
6Destination for Priority Call Termination
0/1 =...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 135
Guest Name Display Through PMS G-5
G-5  Guest Name Display Through PMS
General Description
As part of the ROOM STATUS [R-10] Display on the console, a 16-character digital display is provided for visual
indication of the associated guests name. This information is generated from the PMS computer.
Operating Procedure
To display guest name from console:
Note:
If an error is made in the course of key operations, press CLEAR and...

NEAX2400 IMX Hotel Feature Programming Manual
Page 136ND-70284 (E), Issue 2
G-5 Guest Name Display Through PMS
Assignment Procedure
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
160b
0Hotel Feature required (Fixed Data)
b
1Hotel Service kind (Fixed Data)
b
2Length of Room Status Memory
0/1 = 8 byte/24 byte
b
3Pattern of Key Arrangement on Console
(Refer to Table 4) (Usually, 00)
b
4
b5Guest Name Service
0/1 = Out/In Service
b
6Numbering Plan Data Table of Guest and Administration stations
0/1 =...