NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 157
Group Restriction G-21
G-21 Group Restriction
General Description
This feature allows the guest stations in a group to be restricted per the following conditions.
1. GROUP RESTRICTION is categorized as follows:
Outgoing Call Restriction Guest stations in a group are restricted from originating a call.
Outgoing Station Call Restriction Guest stations in a group are restricted from making a call to
stations in the other groups....

NEAX2400 IMX Hotel Feature Programming Manual
Page 158ND-70284 (E), Issue 2
G-21 Group Restriction
Operating Procedure (cont’d)
To cancel GROUP RESTRICTION from the Console:
To set Group to Group connection from the Console:
To cancel Group to Group Connection from the Console:
To operate from the PMS terminal, follow the operating procedure for the PMS terminal.
a.) To set/cancel GROUP RESTRICTION
ORSC: Outgoing restriction service class
0 = to cancel Outgoing Call Restriction
1 = to set Outgoing...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 159
Group Restriction G-21
Service Conditions
1. This service may not be provided for the guest rooms not checked in.
2. The maximum number of the groups which may be entered in GROUP RESTRICTION is 128.
3. Set/cancellation for GROUP RESTRICTION is available from the Console or according to texts from a
PMS terminal.
4. When the Console operator enters select numbers for restrictions, the following titles are displayed.
Outgoing...

NEAX2400 IMX Hotel Feature Programming Manual
Page 160ND-70284 (E), Issue 2
G-21 Group Restriction
Service Conditions (cont’d)
 When replacement of RSC is assigned.
11. The followings are significations of restriction status displayed on the Hotel Console. However, setting
status of Group to Group Connection is not displayed.
No display No entry
“SO” An entry of Outgoing Station Call Restriction exists
“CO” An entry of Outgoing C.O. Call Restriction exists
“OG” An entry of Outgoing Call Restriction...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 161
Group Restriction G-21
Assignment Procedure
STEP CMND BIT EXPLANATION
Assign GRS, GRR Key
1AHSY
INDEX
114b
0
Not used b
1
b2
b3
b4
b5Console key designation
0/1 = Depending on SYS1, INDEX 160, Bit 3, Bit 4 (ASYD)/PI 115-126 (AHSY)
b
6Not used
b
7
Consecutive Dialing from Console
0/1 = Not Required/Required
If data “1” is assigned, switch settings for the ATI card are necessary.
2AHSY
INDEX
115~126
(Note)
Hotel Attendant Console...

NEAX2400 IMX Hotel Feature Programming Manual
Page 162ND-70284 (E), Issue 2
G-21 Group Restriction
Assign Replacement Connection of RSC While the Restriction
3AHSY
INDEX
243b
0 
SO: Outgoing Station Call Restriction
b
1
b2
b3
b4SI: Incoming Station Call Restriction
b
5
b6
b7
4AHSY
INDEX
244b
0 
SOI: Outgoing/Incoming Station Call Restriction
b
1
b2
b3
b4
OG: Outgoing Call Restriction
b
5
b6
IC: Incoming Call Restriction
b
7
5AHSY
INDEX
246b
0 
CO: Outgoing C.O. Call Restriction
b
1
b2
b3
b4CI: Incoming...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 163
Group Restriction G-21
6AHSY
INDEX
247b
0 
COI: Outgoing/Incoming C.O. Call Restriction
b
1
b2
b3
b4
Not used b5
b6
b7SV: 0/1 = Service Out/In
7Assign Station Call Restriction for the replacement of RSC
Yes/No = Go to Step 8/Go to Step 7N
STEP CMND EXPLANATION
7N ASCRAssign Mutual Outgoing Station Call Restriction
Assign optional restriction data with the combination of the following station calls:
 Outgoing Station Call...

NEAX2400 IMX Hotel Feature Programming Manual
Page 164ND-70284 (E), Issue 2
G-21 Group Restriction
Note 1:
It is necessary to assign data to the corresponding console keys when AHSY Index 114, Bit 5 is assigned.
Note 2:
If the Desk Console is used, the key indications and INDEXes are different from the NEAX2400 IMX Attendant
Console. Refer to the figure below. 15 ARRCAssign Alternative Route Restriction
Release incoming trunk and announcement trunk restriction
16 AAEDAssign Announcement Machine Data...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 165
Guest Station - DtermG-24
G-24 Guest Station - Dterm 
General Description
This feature allows the Dterm to be used as a guest station in the Hotel system. Various useful features such as
HANDS FREE ANSWER BACK - Dterm [H-4D] and MULTIPLE LINE OPERATION - Dterm [M-20D] have
become available for guest room stations.
In addition to time display, 
The Dterm LCD is used for the following Hotel services:
AUTOMATIC WAKE-UP [A-10]...

NEAX2400 IMX Hotel Feature Programming Manual
Page 166ND-70284 (E), Issue 2
G-24 Guest Station - Dterm
3AHSY
INDEX 
105b
0Not used
b1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4
Pattern of Wake Up time indication on the Console
0/1
 = 24 Hour/12 Hour System
Irrespective of data assignment for this bit, 24-hour time display is applied for Automatic Wake-
Up/2nd Wake Up Call.
b
5Not used
b6
b7Guest Name Display on Console
0/1 = Interface Type Model 60, 90, 120/Model 90,...