NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 117
Dterm With Hotel Function D-105D
Operating Procedure (cont’d)
For ROOM STATUS [R-10]
Idle Condition:
Connected to a guest station:
Step Action Result
1
Press the STS key.The LCD shows the feature 
abbreviation.
2Enter the guest station number.
3Press the ENT key.The MESSAGE WAITING [M-6] set, 
CHECK-IN/CHECKOUT [C-23] set, 
DO NOT DISTURB [D-11] set, 
ROOM CUTOFF [R-9] set LEDs will 
illuminate if these services have been 
set...

NEAX2400 IMX Hotel Feature Programming Manual
Page 118ND-70284 (E), Issue 2
D-105D Dterm With Hotel Function
Operating Procedure (cont’d)
Figure 6  Example of 16-Button Dterm on a Front Desk Console
For AUDIT REPORTS [A-26]
Idle Condition only:
Service Conditions
1. A maximum of 32 Front Desk Terminals per Module Group (MG) may be assigned.
2. 16-button or 24-button D
terms shall be used as a Front Desk Terminal.
3. Only Special Administration Stations may be Front Desk Terminals.
4. MESSAGE WAITING...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 119
Dterm With Hotel Function D-105D
Service Conditions (cont’d)
8. The service feature abbreviations shown on the 16-button or 24-button Dterm LCD are shown in Table 5:
Assignment Procedure
Table 5  Standard Service Abbreviations on Dterm
Feature Set/Activate Reset
AUDIT REPORTS [A-26] AUD —
AUTOMATIC WAKE-UP [A-10] WUS WUR
CHECK-IN/CHECKOUT [C-23] C/I C/O
DO NOT DISTURB [D-11] DDS DDR
MESSAGE WAITING [M-6] MWS MWR
ROOM CUTOFF...

NEAX2400 IMX Hotel Feature Programming Manual
Page 120ND-70284 (E), Issue 2
D-107 Direct Data Entry – Station
D-107   Direct Data Entry – Station
General Description
This feature allows a maid or other hotel personnel to enter numeric data to the Property Management System (PMS)
computer, using the guest room station for entry through dial operation.
Operating Procedure
Note:
If a Dterm is used for a guest station, the LCD displays as shown below:
Service Conditions
1. This feature is activated only...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 121
Double Suite Room D-150
D-150   Double Suite Room
General Description
This service allows two suite rooms (single suite rooms) to be connected as a double suite room. Maximum eight
stations can be called simultaneously.
Figure 7  Example of Single/Double Suite Room
Operating Procedure
To call a double suite room:
Service Conditions
1. The single suite rooms must be assigned prior to activating this service.
2. The telephone...

NEAX2400 IMX Hotel Feature Programming Manual
Page 122ND-70284 (E), Issue 2
D-150 Double Suite Room
Service Conditions (cont’d)
c.) When the individual telephone number of the double suite room is called, only that telephone
rings.
4. When all the telephones of the double suite room are rung simultaneously, the call is connected to the first
telephone which answers. When the call is answered, other telephones stop ringing.
5. Each of the telephones in the double suite room can originate the call...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 123
Double Suite Room D-150
Assignment Procedure
See SUITE ROOM SERVICE [S-75] for initial programming.
STEP CMND BIT EXPLANATION
1AHSY
INDEX 
111b
0Fixed Data
b
1
b2Restriction for hooking when an outgoing C.O. line call has originated from a suite room
 0/1 = Restriction/No Restriction
b
3Setting of Message Registration Data to be sent out to the PMS
b
4b3
0 0 : The pilot number is sent out for the Suite Room; the Main Room...

NEAX2400 IMX Hotel Feature Programming Manual
Page 124ND-70284 (E), Issue 2
D-150 Double Suite Room
4AHSY
INDEX 
189b
0
Not used b
1
b2
b3
b4
b5
Calling an Individual Suite Room Station Calling
 0 An individual Suite Room Station can be called from a Guest Station, Administration Station, 
and Console.
 1 An individual Suite Room Station can be called from a Special Administration Station and 
Console.
b
6
Ringing at the time of general calling in the Connecting Room or Suite Room Stations
 0 Ringing all...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 125
DND/MW Lamp Control D-151
D-151  DND/MW Lamp Control
General Description
This service allows the Message Waiting Lamp to be controlled by setting/cancelling DO NOT DISTURB [D-11]
service. The Message Waiting Lamp will either light or flash to distinguish which of the services (MESSAGE
WAITING [M-6] or DO NOT DISTURB [D-11]) is being activated.
Operating Procedure
Refer to the operating procedures of MESSAGE WAITING [M-6] and DO...

NEAX2400 IMX Hotel Feature Programming Manual
Page 126ND-70284 (E), Issue 2
E-21 Emergency Call Monitor – Attendant
E-21   Emergency Call Monitor – Attendant
General Description
EMERGENCY CALL MONITOR – ATTENDANT alerts the hospitality console operator that a guest has placed
a call to an emergency service such as 911. The name and room number of the guest display on the console.
Operating Procedure
Service Conditions
1. An external bell or buzzer can be connected to the emergency trunk through a relay...