NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 167
House Phone/Hot Line H-8
H-8 House Phone/Hot Line
General Description
This feature allows selected stations to reach the Attendant (house phone) or a predesignated station (hot line) by
going off-hook. House phones are normally provided in a hotel lobby or restaurant.
Operating Procedure
Service Conditions
1. When the house phone terminates at the Console, the INCOMING CALL IDENTIFICATION [I-2] will
appear as the HP key of the...

NEAX2400 IMX Hotel Feature Programming Manual
Page 168ND-70284 (E), Issue 2
H-22 Feature Transparency Over CCIS
H-22  Feature Transparency Over CCIS
General Description
This feature allows a hotel system to use Common Channel Interoffice Signaling (CCIS), which conforms to the
CCITT Signaling System No. 7. Some of the hospitality services may be activated over different offices via the
CCIS lines.
Operating Procedure
To originate a CCIS call:
Figure 10  Example of Display for Call Origination — from...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 169
Feature Transparency Over CCIS H-22
Operating Procedure (cont’d)
To terminate a CCIS call:
To answer a CCIS call:
Figure 12  Call Termination on Attendant Console, Desk Console, Special Administration Dterm
To set and cancel service features from the Console:
Action Result
Press the RLS key. Console displays time, date, and site name.
Action Result
The Attendant or the Dterm user answers an 
incoming central office call.The...

NEAX2400 IMX Hotel Feature Programming Manual
Page 170ND-70284 (E), Issue 2
H-22 Feature Transparency Over CCIS
Operating Procedure (cont’d)
Figure 13  Example of Service Feature Setting — Attendant Console and Desk Console
Service Conditions
1. This service is available in 1-IMG and 4-IMG systems.
2. The service is available for the PMS Terminal Models 60/90/120.
3. The connection to the host computer is made in the individual office.
4. The same PMS interface model is assigned in every office.
5. When...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 171
Feature Transparency Over CCIS H-22
Service Conditions (cont’d)
16. The day/night mode changeover is performed by the NITE key in the office where the Console is placed,
and by the external key in the other offices. Before leaving, the Attendant should press the NITE key and
answer all the terminating calls.
17. When NAME DISPLAY – SYSTEM – CCIS [N-36] and Guest Name Display over CCIS are both
available, NAME DISPLAY – SYSTEM –...

NEAX2400 IMX Hotel Feature Programming Manual
Page 172ND-70284 (E), Issue 2
H-22 Feature Transparency Over CCIS
LEGEND
:
X: Available —: Not Available
*: Available with some limitations✰: USA and Canada only
D-150 Double Suite Room —
D-151 DND/MW lamp Control —
G-1 Guest/Administrative Service X
G-4 Group Service through PMS X*Available from Console / 
D
term with Hospitality 
Functions.
G-5 Guest Name Display through PMS X
G-6D
Guest Name Display –D
termX
G-7D
Guest Information Display – D
term—
G-8...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 173
Feature Transparency Over CCIS H-22
Assignment Procedure
The following data assignment is required in addition to basic data assignment for CCIS. 
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
160b
0Hotel Feature required (Fixed Data)
b
1Hotel Service kind (Fixed Data)
b
2Length of Room Status Memory
0/1 = 8 byte/24 byte
b
3Pattern of Key Arrangement on Console
(Refer to Table 4) (Usually, 00)
b
4
b5Guest Name Service 0/1 = Out/In...

NEAX2400 IMX Hotel Feature Programming Manual
Page 174ND-70284 (E), Issue 2
I-23 Inter-Position Transfer 2
I-23 Inter-Position Transfer 2
General Description
This feature is applicable for a multi-attendant environment and will provide for the transfer of an incoming station
or trunk call to a group of attendants by use of the Priority Call key.
An attendant can answer an incoming call, put the call on hold at the Attendant loop, and page the requested party.
The paged party calls the attendant, and if a...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 175
Inter-Position Transfer 2 I-23
Assignment Procedure
STEP CMND EXPLANATION
1 AHKP Function 3, 4, or 5 – Priority Call 1, 2, or 3
2 AASP SID 37, 38, or 39 - Priority Call 1, 2, or 3
3 ASYD SYS1, INDEX 73, Bit 7 - Enable Console Loop to Loop Connection 

NEAX2400 IMX Hotel Feature Programming Manual
Page 176ND-70284 (E), Issue 2
L-27 Language Service
L-27 Language Service
General Description
This service provides the announcement in the guests language and the language information display in case
following services are activated.
1. Announcement Services
The announcements sent to the guest will be in his/her language.
AUTOMATIC WAKE-UP [A-10]
AUTOMATIC WAKE-UP – HOTEL ATTENDANT [A-58]
GROUP SERVICE THROUGH PMS [G-4]
2. Language Information Display
When...