NEC Neax 2400 Imx Hotel Feature Programming Manual

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 187
Maid Status M-22
2SYS1
ASYD
INDEX1
64b
0
Assignment of ID Code Information
b
2b1b0b2b1b0
0 0 0 = Not used 1 0 0 = 4 digits
0 0 1 = 1 digit 1 0 1 = 5 digits
0 1 0 = 2 digits 1 1 0 = 6 digits
0 1 1 = 3 digits 1 1 1 = Not used
Note:
Do not assign “000” or “111”. b
1
b2
b3ID Code for setting/canceling Maid Status
0/1 = Not Required/Required
b
4Number of Digits of Group Code (PMS option)
b
5
b6
b7
ID Code to be entered when setting...

NEAX2400 IMX Hotel Feature Programming Manual
Page 188ND-70284 (E), Issue 2
M-22 Maid Status
5AHSY
INDEX
49 – 54Maid Status Information Display
For information display at the time of Stay, assign the related data by two characters of 
ASCII code.
Stay Index 49–50
Stay Cleaning Index 51–52
Stay Inspection Index 53–54
6AHSY
INDEX
105b
0Not used
b
1
b2Maid Dial service from Console
0/1 = Not Required/Required
b
3Not used
b
4Pattern of Wake Up Time Indication on the Console
0/1 = 24-Hour/12-Hour System
b...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 189
Maid Status M-22
12 ARTDAssign route data of the trunk interfacing with the announcement unit.
(OSGS = 2, TCL = 4, LSG = 5 should be set.)
13 ATRK Assign the trunk interfacing with announcement unit.
14 MBTK Release the Make Busy of the trunk assigned in ATRK.
15 ARSCRelease the call restrictions between the RSC of the station accessing the announcement unit and the 
route of the trunk assigned in ATRK.
(RRI = 2, 3)
16...

NEAX2400 IMX Hotel Feature Programming Manual
Page 190ND-70284 (E), Issue 2
M-51 Manual Switching Of C.O. Incoming Call Destination
M-51  Manual Switching Of C.O. Incoming Call 
Destination
General Description
This feature allows the Console operator to manually change the termination point of a specific group of trunks.
Trunks that normally are used as DIT trunks may be changed to terminate at the Console.
Operating Procedure
To change the termination of DIT trunks from stations to the Console:
To...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 191
Manual Switching Of C.O. Incoming Call Destination M-51
Assignment Procedure
CMND BIT EXPLANATION
AHSY
INDEX 
166b
0TN = 2Set “1” to the bit corresponding to the Tenant Number of the Tenant receiving the 
C.O. line changing.
Whether “C.O. Incoming Call Answer Station Manual Change” service is provided 
or not is set on the basis of each TN (Tenant) corresponding to each bit.
0/1 = Out/In Service b
1TN = 3
b2TN = 4
b3TN = 5
b4TN...

NEAX2400 IMX Hotel Feature Programming Manual
Page 192ND-70284 (E), Issue 2
M-68 Maid Status - Answerback
M-68  Maid Status - Answerback
General Description
This feature allows a maid or other hotel personnel to receive answerback acknowledgment from the PMS (Property
Management System) computer when MAID STATUS has been changed using guest room station or Special
Administration Station telephones.
Operating Procedure
Service setting from a guest room station by a maid or repairman:
Note:
In case of...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 193
Maid Status - Answerback M-68
Assignment Procedure 
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX 
163b
0Over Time Call timer.
b
1
b2Over Time Call
0/1 = Out/In Service
b
3Over Time Call indication
0/1 = On Console/Hotel Printer
b
4Step Call from Guest Station is allowed
0/1 = Out Service/In
b
5Tone type for Maid Dialing
b
6b5b6b5
00= SST 10 =  –
0 1 =  Announcement 1 1 = Music on Hold b6
b7Start time of Automatic Wake-Up Call
0/1:...

NEAX2400 IMX Hotel Feature Programming Manual
Page 194ND-70284 (E), Issue 2
M-68 Maid Status - Answerback
Note:
Room Cutoff (RSC 13)
Do Not Disturb (RSC 14)
Room Cutoff and Do Not Disturb (RSC 15) 3SYS1
ASYD
INDEX
170b
0Room status data (b2, b1, b0) to be set at the time of Checkout
b
2b1b0b2b1b00 0 0  = – 0 1 0 = Cleaned
0 0 1  = To be Cleaned 0 1 1  = Ready for Occupancy
Note:
Do not assign other data. b1
b2
b3Restriction at the time of Do not Disturb and Room Cut-Off
0/1 = Room Status Memory/Change of...

NEAX2400 IMX Hotel Feature Programming Manual
ND-70284 (E), Issue 2
Page 195
Off-hook Alarm O-6
O-6 Off-hook Alarm
General Description
The OFF-HOOK ALARM feature is intended for emergency alert situations. A station user who remains off-hook
without dialing for longer than 30 seconds is automatically routed to the EMG key on the Console or to a
predesignated station.
Operating Procedure
Service Conditions
1. Under CALL HOLD [C-6] or CONSULTATION HOLD – ALL CALLS [C-17] mode, the OFF-HOOK
ALARM service...

NEAX2400 IMX Hotel Feature Programming Manual
Page 196ND-70284 (E), Issue 2
O-6 Off-hook Alarm
Assignment Procedure
When the Off-Hook Alarm termination is a Console:
STEP CMND BIT EXPLANATION
1SYS1
ASYD
INDEX
6
(Note)b
0Special Transmitting Tone When Using Sender (Station)
0/1 = Not Required/Required (used with LCR/Speed Calling, etc.)
b
1Not used
b
2Special Transmitting Tone When Using Sender (ATT) 
0/1 = Not Required/Required (used with LCR/Speed Calling, etc.)
b
3Not used
b
4
Assign ATT Pattern 1 or...