NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 238  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
TRUNK ANSWER FROM ANY STATION-CCIS
General Description
This feature allows any station, not restricted from incoming calls, to answer incoming calls when
the network is in Night Mode.
When this feature is activated, incoming exchange network calls will activate a common aler t
Trunk Answer From Any Station (TAS) signal at the customer premises. By dialing a specified...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 239
For the Satellite Office
Use the LDN Diversion feature.
DESCRIPTION DATA
Assign a Trunk Restriction Class to each 
station.
(1)
(2)YY=01
X-XXXXXXXX: Station No.
XZ
Z: 1-8: Trunk Restriction Class in Night 
Mode
1: Unrestricted (RCA)
2: Non-Restricted 1 (RCB)
3: Non-Restricted 2 (RCC)
4: Semi-Restricted 1 (RCD)
5: Semi-Restricted 2 (RCE)
6: Restricted 1 (RCF)
7:...

 NEAX2000 IVS2 CCIS System ManualPage 240  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
DESCRIPTION DATA
Assign the data for LDN Diversion to each 
indialed number assigned by CM50 
YY=02.
(1)
(2)YY=00 Tenant No. of the LDN
01-08: TIE 0-7 assigned by CM50 
YY=02
00-63: Tenant No.

(1)
(2)YY=01 TAS Group No.
Same as CM58 Y=00
00-63: TAS Group No.

(1)
(2)YY=02 Day Mode Destination
Same as CM58 Y=00
08: To TAS

(1)
(2)YY=03 Night Mode Destination
Same as...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 241
DESCRIPTION DATA
Specify the tenants allowing TAS Answer 
between them.
(1)
(2)Y=0
XX ZZ
XX: 00-63 (Tenant No. of TAS Answer 
station)
ZZ: 00-63 (Tenant No. of Trunk)
0 : Allow
1: RestrictedB
END
CM63 

 NEAX2000 IVS2 CCIS System ManualPage 242  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
To provide an External TAS Indicator via the DK card:
DESCRIPTION DATA
Assign the card number of the to required 
LEN.
NOTE:The DK card number must be as-
signed to the 1st LEN (Level 0), 
the 3rd LEN (Level 2) of each LT 
slot.(1)
(2)000-763: LEN
E800-E831: DK Card No.
For PIM0/1: EB800-EB807
For PIM2/3: EB808-EB815
For PIM4/5: EB816-EB823
For PIM6/7: EB824-EB831
Assign...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 243
To provide the telephone set for TAS Indication:
DESCRIPTION DATA
Assign the TAS Buzzer number (telephone 
set for TAS Indication) to the required LEN. 
The TAS Buzzer number must correspond 
with the TAS Group number assigned by 
CM30 YY=17.
E600-E663 TAS Group 00-63(1)
(2)000-763: LEN
E600-E663: TAS Buzzer No.START
CM10
END 

 NEAX2000 IVS2 CCIS System ManualPage 244  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
For Main Office
COT: When using a COT interface between the Central Office and a Main Office, set up 
programming to the Main Office by using the DIT-CCIS feature, and send the dial 
code as an LDN to the Satellite Office. Refer to programming of DIT-CCIS in this 
chapter for details.
DID:  When using a DID interface between the Central Office and the Main Office, there...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 245
DESCRIPTION DATA

(1)
(2)YY=03 Night Mode Destination
Same as CM58 YY=02
09: LDN Diversion-Outside 
(Assigned by CM58 YY=09)
Assign the Abbreviated Code for System 
Speed Dialing to terminate the Satellite 
Office via CCIS by DID in Day Mode and 
Night Mode, respectively.

(1)
(2)YY=08 Day Mode
YY=09 Night Mode
Same as CM58 YY=02
CXX
XX: Abbreviated Code for...

 NEAX2000 IVS2 CCIS System ManualPage 246  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk Answer From Any Station-CCIS
Hardware Required
To provide the External TAS Indicator:
- DK card (Four Indicators per card can be equipped)
- Indicator 
Requirement to External Indicator
Control Method : Loop/Ground/Battery (-27 V) (Max. 125 mA)
Type : Visual and/or Audible type with volume control
For cross connection of the TAS indicator, refer to the Installation Procedure Manual.
To provide the...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Trunk to Trunk Restriction-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 247
TRUNK TO TRUNK RESTRICTION-CCIS
General Description
This feature allows trunk to trunk tandem restriction by caller’s information (e.g., caller is a trunk)
through the CCIS network.
Case 1: A tandem connection at the following office can be restricted by Trunk Restriction
Class of Trunk A and Outgoing Connection Restriction data of  Trunk B.
Case 2: When Station B...