NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 198  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Distinctive Ringing-CCIS
DISTINCTIVE RINGING-CCIS
General Description
This feature provides distinctive station ringing patterns for terminated calls through the CCIS
network so that a station user can distinguish between incoming internal and external calls.
Programming
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
Select the ringing pattern on external call.
(1)
(2)YY=33
00-63:...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Do Not Disturb-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 199
DO NOT DISTURB-CCIS
General Description
This feature allows a station user to establish the Do Not Disturb (DND) status on a temporary
basis, during which time access to the station from incoming CCIS calls will be denied.
Programming
DESCRIPTION DATA
Assign the Service Restriction Class A the 
required stations.
(1)
(2)YY=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service...

 NEAX2000 IVS2 CCIS System ManualPage 200  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Do Not Disturb-CCIS
DESCRIPTION DATA
If the Attendant Console is assigned as the 
destination by CM51, assign a Call 
Forwarding-Intercept (ICPT) key to the 
console.
(1)
(2)YY=00
My Line No. +   + Key No.
F6065: Call Forwarding-Intercept Key
Assign a DND function key to a D
term, if 
desired.
(1)
(2)YY=00
My Line No. +   + Key No.
F0022: Do Not Disturb set/reset
Assign DND and DNDOVR function keys 
to...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Do Not Disturb-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 201
Operating Procedure
Single-Line Telephone/Dterm
To set Do Not Disturb from a Single-Line Telephone or Dterm:
(1) Lift the handset; receive dial tone.
(2) Dial Do Not Disturb-CCIS feature access code; receive service set tone.
(3) Replace the handset.
To cancel Do Not Disturb from a Single-Line Telephone or D
term:
(1) Lift the handset; receive dial tone.
(2) Dial Do Not...

 NEAX2000 IVS2 CCIS System ManualPage 202  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Dual Hold-CCIS
DUAL HOLD-CCIS
General Description
This feature allows two connected Dterms to simultaneously be placed on hold over the CCIS link.
This enables the held parties to answer or originate a call from a secondary-line appearance or
the idle prime extension.
Programming
Operating Procedure
To operate Dual Hold-CCIS from a Dterm:
(1) Station A pressed the HOLD key; Station B is placed on hold....

CHAPTER 3 SYSTEM DATA PROGRAMMING
Flexible Numbering of Stations-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 203
FLEXIBLE NUMBERING OF STATIONS-CCIS
General Description
This feature allows voice and data station numbers to be assigned to any instrument in the CCIS
network, based solely upon numbering plan limitations.
PUBLIC 
NETWORK
MAIN OFFICE
4XXXX
51XX
6XXXX6XXXX52XX53XX
TRIBUTARY OFFICE
PUBLIC 
NETWORKSATELLITE OFFICE
Office location is indicated by all digits of the...

 NEAX2000 IVS2 CCIS System ManualPage 204  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Flexible Numbering of Stations-CCIS
Programming
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
Assign a Numbering Plan Group to each 
Tenant.(1)
(2)00-63: Tenant No.
710-713: Numbering Plan Group 0-3
Specify the number of digits for station 
numbers.
Example: For setting station number 
“2XXX”
(1) 2
(2) 804
NOTE:To the following stations, 5 or 
more digit station numbers must 
not...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Hot Line-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 205
HOT LINE-CCIS
General Description
This feature allows two stations at different nodes in the CCIS network to be mutually associated
on an automatic ring down basis through the CCIS network.
Programming
Use the Hot Line-Outside feature.
DESCRIPTION DATA
Assign a Hot Line to the required stations.
(1)
(2)YY=03
X-XXXXXXXX: Station No.
04: Hot Line
Allocate memory area Hot Line-Outside...

 NEAX2000 IVS2 CCIS System ManualPage 206  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Hot Line-CCIS
Operating Procedure
To place a Hot Line-CCIS call:
(1) Station “A” lifts the handset.
(2) Station “B” is rung.
(3) Station “B” lifts the handset and the connection is established.
DESCRIPTION DATA
Specify the result of Switch Hook Flash on 
Hot Line station.
To allow Hot Line stations to transfer a call 
or access a feature, set the data to”0”.(1)
(2)057
0 : Special Dial Tone
1 : Attendant...

CHAPTER 3 SYSTEM DATA PROGRAMMING
House Phone-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 207
HOUSE PHONE-CCIS
General Description
This feature allows selected stations to call an Attendant Console through the CCIS network,
simply by going off hook.
Programming
Use the Hot Line-Outside feature.
DESCRIPTION DATA
Assign a Hot Line (House-phone) to the 
required station.
(1)
(2)YY=03
X-XXXXXXXX: Station No.
04: Hot Line (House-phone)
Allocate memory area for Hot Line-
Outside...