NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 178  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
Example 5: Data Assignment of CMD004>56
To specify the billing office (Office B) in center office (Office C) when a station of Office A make
an outgoing call through Office B:
Data Assignment of Office A
Command Code 1st Data 2nd Data Remarks
CMD004 56 822
OFFICE 
A
OFFICE 
BOFFICE 
C CCH0 Sta.
CCH0CCH1SMDR
PC: 00001 
OFFICE NO.: 821
PC: 00002 
OFFICE NO.: 822PC: 00003 
OFFICE...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Day/Night Mode Change-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 179
CENTRALIZED DAY/NIGHT MODE CHANGE-CCIS
General Description
This service feature switches the Day/Night Mode of a remote office, linked to the main office IMX
via CCIS, in accordance with the Day/Night Mode switching on the Attendant Console at the main
office.
For Satellite Office
If no Attendant Console is required in the Satellite Office, the following...

 NEAX2000 IVS2 CCIS System ManualPage 180  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Day/Night Mode Change-CCIS
To provide an indication on external equipment when Day/Night Mode status is changed by the
Attendant Console at the Main Office, do the following programming.
Hardware Requirements
DK card × 1/External Equipment Interface on the MP card
External Indicator (Bell, Lamp etc.) provided by the customer
For cross connection of the External Indicator, refer to the...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized MAT-CCIS (Future Enhancement)
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 181
CENTRALIZED MAT-CCIS (FUTURE ENHANCEMENT)
General Description
All nodes in the multiple IMXs and IVSs through CCIS link can be maintained from the sole MAT
installed in an IMX.
When the fault occurs at an IVS, the fault information (node name, alarm kind) is displayed on at
the Centralized MAT.
• The IVS must be a subordinate office.
 The opposite office...

 NEAX2000 IVS2 CCIS System ManualPage 182  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized MAT-CCIS (Future Enhancement)
Programming
DESCRIPTION DATA
Assign fault kind information and its 
external alarm kind.
Fault Kind number:
01 : System Initialization
04 : MP-FP/AP communication failure
08 : FP/AP card down
09 : Power failure
12 : CS/ZT fault occurred
16 : Battery exchange periodic alarm
20 : DTI Line failure
21 : DCH/BRT/PRT D-channel link 
connection failure
22 : CCH Link...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized MAT-CCIS (Future Enhancement)
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 183
DESCRIPTION DATA
Specify the external alarm kind which is 
automatically sent.
(1)
(2)Y=3
00-02: External Alarm Kind set by 
CMEA Y=2
0 : Sent
1 : Not sent
Specify the contents which is sent to the 
Integrated Maintenance office as external 
alarm kind.
(1)
(2)Y=4
01: Kind of Information Transferred
2: External Alarm Kind
Specify the Point Code of the...

 NEAX2000 IVS2 CCIS System ManualPage 184  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized MAT-CCIS (Future Enhancement)
NOTE:When a fault occurs, the external alarm kind registered in the IVS in the CCIS network
is displayed on Centralized MAT on the IMX office as follows:
DFTD 99/08/30 14:57 xxxxxxxxxxxxxxx
SYSTEM MESSAGE 15-0 IVS MESSAGE
xxxxxxxxx Aug 30 14:56
LP00-0-ACT
DFTD 99/08/30 14:57 XXXXXXXXX : Date of external alarm message output
SYSTEM MESSAGE 15-0 IVS MESSAGE : Means...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Consultation Hold-All Calls-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 185
CONSULTATION HOLD-ALL CALLS-CCIS
General Description
This feature permits a station user within the CCIS network to hold any incoming/outgoing public
network or Tie Line call while originating a call to another station within the CCIS network.
Programming
Operating Procedure
Single-Line Telephone
To hold the original call and place a second call from a Single-Line...

 NEAX2000 IVS2 CCIS System ManualPage 186  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Consultation Hold-All Calls-CCIS
To return to the original call from a Single-Line Telephone:
(1) Under any of the following conditions, the calling station can return to the original call by 
pressing the switch hook:
(a) The second station called is busy.
(b) The calling station cannot gain access to the second station because of a restriction, 
etc.
(c) The second station does not answer.
(2) If the...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Data Line Security-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 187
DATA LINE SECURITY-CCIS
General Description
This feature allows line circuits which are used for data transmission to be protected from
following interruptions:
Attendant Camp-On with Tone Indication (Attendant Camp-On)
Attendant Camp-On with Tone Indication-CCIS
Attendant Override
Automatic Camp-On (Attendant Camp-On)
Boss-Secretary-Message Waiting Lamp Control-D
term...