NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 138  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Don’t Answer-CCIS
When a call is forwarded through CCIS by Call Forwarding-All Calls/-Busy Line/-Don’t Answer,
the kind of Call Forwarding and the station number which is setting the service can be indicated
on the LCD of the forwarding destination D
term.
To provide this feature, perform the following programming.
On the Forwarding side PBX (PBX-A)
On the Forwarded destination side PBX...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Don’t Answer-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 139
Operating Procedure
Single-Line Telephone
To set Call Forwarding-Don’t Answer-CCIS from a Single-Line Telephone:
(1) Lift the handset; receive dial tone.
(2) Dial the Call Forwarding-Don’t Answer-CCIS access code; receive feature dial tone.
(3) Dial the outgoing trunk access code; receive a single burst service set tone.
(4) Dial the station number to which calls are...

 NEAX2000 IVS2 CCIS System ManualPage 140  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Don’t Answer-CCIS
Dterm
To set Call Forwarding-Don’t Answer-CCIS from a Dterm:
(1) Lift the handset or press the SPEAKER Key; receive dial tone.
(2) Press the Call Forwarding-Don’t Answer-CCIS feature access key; receive feature dial tone.
(3) Dial the outgoing trunk access code; receive a single burst service set tone.
(4) Dial the station number to which calls are to be forwarded.
(5)...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Intercept-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 141
CALL FORWARDING-INTERCEPT-CCIS
General Description
This feature allows calls to an inoperative number, through a CCIS trunk, to be intercepted and
automatically routed to a recorded announcement informing the caller that an inoperative number
was dialed, and giving the Listed Directory Number for information.
TEL
PUBLIC 
NETWORK
MAIN OFFICEVOICE RECORDING 
MEMORY CARD...

 NEAX2000 IVS2 CCIS System ManualPage 142  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Intercept-CCIS
Programming
DESCRIPTION DATA
Assign the Digital Announcement Trunk 
card number to the required LEN.
(For Intercept Announcement only.)
NOTE:The Digital Announcement Trunk 
card number must be assigned 
to the 1st LEN (Level 0), the 3rd 
LEN (Level 2), the 5th LEN (Level 
4), and the 7th LEN (Level 6) of 
each LT slot.(1)
(2)000-763: LEN
EB002-EB127: Digital Announcement...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Intercept-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 143
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
To record, replay, or delete a massage, 
assign the appropriate Digital 
Announcement Trunk Card access codes.
(For Intercept Announcement only.)
(1)
(2)Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Digital Announcement Trunk 
access (Record)
A101: Digital Announcement Trunk 
access...

 NEAX2000 IVS2 CCIS System ManualPage 144  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-Override-CCIS
CALL FORWARDING-OVERRIDE-CCIS
General Description
This feature allows a target station user (Station A) to call the station (Station B) which set Call
Forwarding-All Calls-CCIS to it through CCIS. 
Programming
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
Assign Call Forwarding-Override-CCIS. (1)
(2)271
0 : Not available (BT connection)
1:...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Transfer-All Calls-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 145
CALL TRANSFER-ALL CALLS-CCIS
General Description
This feature allows a station user to transfer incoming or outgoing Central Office, inter-office and
inter-office calls to another station in the CCIS network, without Attendant assistance.
Programming
DESCRIPTION DATA
Assign the Service Restriction Class A to 
the required stations.
(1)
(2)YY=02
X-XXXXXXXX: Station No.
XX...

 NEAX2000 IVS2 CCIS System ManualPage 146  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Transfer-All Calls-CCIS
NOTE:See also the programming for “Trunk to Trunk Connection” in the “Feature Programming
Manual”, when no release signal arrives from the incoming trunk route.
Operating Procedure
To transfer a call in progress from a Single-Line Telephone:
(1) Press the hookswitch momentarily and receive feature dial tone.
(2) Dial the third party and receive ringback tone.
(3) At this...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Transfer-Attendant-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 147
CALL TRANSFER-ATTENDANT-CCIS
General Description
This service feature permits a station user, while connected to a CCIS network call, to transfer a
call to an Attendant Console located in the main office via the CCIS network.
Programming
DESCRIPTION DATA
Assign the Service Restriction Class A to 
the required stations.
(1)
(2)YY=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15...