NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 158  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
SMDR with AP00 Programming (1) 
PROGRAMMING FOR CENTER OFFICE
When sending billing information from local offices to SMDR of Center Office, do the following
programming.
When sending billing information from both Center Office and Local Office to SMDR of Center
Office, do the following programming in addition to the basic programming of SMDR with AP00.
For details of the SMDR with...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 159
DESCRIPTION DATA
Do not provide the system with Built-in 
SMDR on MP card.(1)
(2)800
1 : Not provided
(AP00 is effective)
Provide the system with Centralized 
Billing-CCIS for Center Office.(1)
(2)368
0: Provided
Do not provide the system with Centralized 
Billing-CCIS for Local Office.(1)
(2)378
1 : Not provided
Assign the second data to 1 (Distant end is 
a Local Office) to...

 NEAX2000 IVS2 CCIS System ManualPage 160  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
DESCRIPTION DATA
Assign the attribute data, depending on 
the port (Port 0-3) connected to the SMDR 
terminal. (For the details of commands, 
refer to the Command Manual.)(1)
(2)See the following table.
See the following table.
NOTE:For the Port 1 and Port 3, data speed 9600 bps cannot be set.
Assign the Charging Station Class number 
to each station number.(1)
(2)X-XXXX: Station...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 161
DESCRIPTIONDATA
Invalidate the data setting of Centralized 
Billing used for Local Office.(1)
(2)XX31: Sending of billing information of 
C.O. outgoing calls through 
CCIS
XX : 00-15 (Station Class No. 
assigned by CMD015)
1 : Sent
(1)
(2)XX32: Sending of billing information of 
Tie Line outgoing calls through 
CCIS
XX : 00-15 (Station Class No. 
assigned by CMD015)
1 : Sent...

 NEAX2000 IVS2 CCIS System ManualPage 162  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
Built-in SMDR Programming
For Local Office or Tandem Office, in addition to the basic programming of Built-in SMDR, do the
following programming. For details of the Built-in SMDR, refer to Feature Programming Manual.
NOTE 1:When the system provides an AP00 card (CM05 Y=0 second data=04 is assigned), the
Built-in SMDR cannot be provided.
NOTE 2:Outgoing and tandem call records are...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 163
DESCRIPTIONDATA
Assign the data as follows.
1st Data 2nd Data
CCIS channel No.  0
(0-7) for 
Center Office
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
(1)
(2)YY=03
0-7: CCIS channel No.
0 : Distant end is Center Office
1 : Distant end is Local Office
Assign Centralized Billing destination.
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176....

 NEAX2000 IVS2 CCIS System ManualPage 164  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
SMDR with AP00 Programming (2)
For Local Office or Tandem Office, in addition to the basic programming of SMDR with AP00, do
the following programming. For details of the SMDR with AP00, refer to Feature Programming
Manual.
DESCRIPTION DATA
Not provide the system with Built-in SMDR 
of MP card.
NOTE:Do not assign CM40 YY=00>14 
when using Built-in SMDR in 
Local Office of...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 165
DESCRIPTIONDATA
Assign the data as follows.
For Local Office:
1st Data 2nd Data
CCIS channel No.  0
(0-7) for 
Center Office
For Tandem Office:
1st Data 2nd Data
CCIS channel No. 0
(0-7) for 
Center Office
CCIS channel No. 1
(0-7) for
Local Office
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
(1)
(2)YY=03
0-7: CCIS channel No.
0 : Distant end is Center...

 NEAX2000 IVS2 CCIS System ManualPage 166  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
DESCRIPTION DATA
Assign a Station Class number to the 
required station number.(1)
(2)X-XXXX: Station No.
00 -15: Station Class No.
Assign the data for sending the detail call 
information for C.O. outgoing calls through 
CCIS.(1)
(2)XX31
XX: 00-15 (Station Class No. assigned 
by CMD015)
1: To send
Assign the data for sending of detail call 
information for Tie Line outgoing calls...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 167
Example 1: Data Assignment of SMDR output for Center Office
In a Centralized Billing Office, the following four patterns of SMDR output can be selected.
(1) To SMDR 0: Sending of billing information from both a Center Office and Local Offices.
(2) To SMDR 1: Sending of billing information from both a Center Office and Local Offices.
(3) To SMDR 0: Sending of billing...