NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 118  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Brokerage-Hot Line-CCIS
BROKERAGE-HOT LINE-CCIS
General Description
This feature provides a ringdown connection between two stations, each using a Dterm, in
different offices in the CCIS network.
Programming
DESCRIPTION DATA
Assign the Virtual Line station number to 
the required Virtual LEN.(1)
(2)000-255: Virtual LEN
X-XXXXXXXX: Virtual Line station No.
Assign the Hot Line to the Virtual Line sta-
tions...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Brokerage-Hot Line-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 119
Operating Procedure
To access from a Dterm:
(1) Lift the handset or press the SPEAKER key.
(2) Press the line/feature key associated with the preassigned station. 
The destination station is automatically dialed; ring back tone is heard, destination station 
answers.
(3) After completion of conversation, hang up or press the SPEAKER key.
To make another Brokerage-Hot Line-CCIS...

 NEAX2000 IVS2 CCIS System ManualPage 120  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Busy Verification-CCIS
BUSY VERIFICATION-CCIS
General Description
This service feature permits the operator, via the Attendant Console on the IMX or the IVS, to
interrupt a busy station’s call at another switching office connected through CCIS.
Programming
DESCRIPTION DATA
Provide the system with Busy Verification. (1)
(2)012
1 : Available
Specify whether the Warning Tone is sent 
to the connected...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Busy Verification-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 121
Operating Procedure
To activate Busy Verification-CCIS:
(1) Press an idle LOOP key.
(2) Dial the desired station number; receive busy tone.
(3) Press the BV key.
(4) Two-burst tones are sent to connected parties.
(5) The operator may monitor or join the conversation.
(6) Press the RELEASE key to disengage. 

 NEAX2000 IVS2 CCIS System ManualPage 122  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Back-CCIS
CALL BACK-CCIS
General Description
This feature provides inter-office Call Back-CCIS service. A station user who has dialed a busy
station at another office can set Call Back-CCIS by dialing a feature access code. When this
service has been set, the calling station will be rung as soon as the busy station becomes
available.
Programming
DESCRIPTION DATA
Assign Service Restriction Class A to...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Back-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 123
Operating Procedure
Single-Line Telephone:
To set Call Back-CCIS from a Single-Line Telephone:
(1) Dial desired station number; receive busy tone.
(2) Press hookswitch for feature dial tone.
(3) Dial Call Back-CCIS feature access code; receive service set tone.
(4) Replace the handset.
(5) When desired station becomes idle, calling station will ring.
(6) When calling station answers,...

 NEAX2000 IVS2 CCIS System ManualPage 124  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Back-CCIS
(5) When calling station answers, the called station will ring.
(6) The originaly called Station’s LCD displays:
To  c a n c e l
 Call Back-CCIS from a Dterm:
(1) Lift the handset or press the SPEAKER key, receive dial tone.
(2) Press the Call Back Line/Feature key; receive service set tone. Call Back-CCIS is canceled
(3) The LCD displays:
XXXX
(TIME DISPLAY)
Called station number D
term 65...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-All Calls-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 125
CALL FORWARDING-ALL CALLS-CCIS
General Description
This service feature permits all calls destined for a particular station to be routed to another
station, or to an Attendant Console, in another office in the CCIS network regardless of the status
(busy or idle) of the called station. Activation and cancellation may be accomplished by either the
station user or an...

 NEAX2000 IVS2 CCIS System ManualPage 126  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-All Calls-CCIS
DESCRIPTION DATA
Specify the Call Forwarding-All Calls-Out-
side setting operation.(1)
(2)222
0 : The feature is set when the station 
goes on hook/when receiving 
Service Set Tone (ORT time out)
1 : The feature is set when receiving 
Service Set Tone (ORT time out)
Assign whether or not an extension can 
set Call Forwarding-All Calls-Outside by 
entering only a trunk access...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Forwarding-All Calls-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 127
When a call is forwarded through CCIS by Call Forwarding-All Calls/-Busy Line/-Don’t Answer,
the kind of Call Forwarding and the station number which is setting the service can be indicated
on the LCD of the forwarding destination D
term.
To provide this feature, perform the following programming.
On the Forwarding side PBX (PBX-A)
On the Forwarded destination side...