NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 88  ND-70918 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
DESCRIPTION DATA
For North America/Other Countries:
Provide the System with Call Forwarding 
Override-CCIS.(1)
(2)371
0 : Not available
1 : Available
Specify alternative routing when the out-
going trunks of Tandem Office are all busy.(1)
(2)372
0 : Available
1 : Not available
Provide Station-to-Station Transfer over 
CCIS.(1)
(2)253
0 : Available
1 : Not Available
END...

CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 89
CCH Assignment
DESCRIPTION DATA
Assign an AP number to the CCH card. 
The AP number must match the switch 
settings on the CCH card.
(1)
(2)Y=0
04-15, 20-31: AP No.
11: CCH card
Assign a CCIS channel number to each 
CCH card.
(1)
(2)YY=07
0-7: CCIS channel No.
04-15, 20-31: AP No. of the CCH card 
assigned by CM05 Y=0
Provide the common signaling channel 
and voice...

 NEAX2000 IVS2 CCIS System ManualPage 90  ND-70918 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
DESCRIPTION DATA
Assign a Originating Point Code (OPC) to 
each CCIS channel number.
NOTE:The Originating Point Code is 
used to designate an originating 
office in the No. 7 CCIS network. 
A single OPC should be 
assigned to all CCIS channels 
provided in the same system.
(1)
(2)YY=01
0-7: CCIS channel No.
00001-16367: Originating Point Code
Assign a Destination Point...

CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 91
Numbering Plan Assignment
 For open numbering system
DESCRIPTION DATA
Assign the access code for LCR Group 0-
3.
(1)
(2)Y=0-3 Number Plan Group 0-3
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
Assign an Area Code Development 
Pattern number to each LCR Group.
(1)
(2)YYYY=A000
0-3: LCR Group 0-3
4000-4007: Area Code...

 NEAX2000 IVS2 CCIS System ManualPage 92  ND-70918 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
DESCRIPTION DATA
To delete the designated digit of an area 
code:
(1)
(2)YYYY=5000-5255 
LCR Pattern No. 000-255
153: Designation of digit to be deleted
00 : No digit deletion
01-10: Leading 1-10 digits deletion
CCC : No digit deletion
For digit addition, designate the digits to be 
added.
NOTE:Digits are always added in front 
of the number to be dialed.
(1)...

CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 93
 For closed numbering system
DESCRIPTION DATA
Assign the access code for LCR Group 3.
(1)
(2)Y=0-3 Number plan Group 0-3
X-XXXX: Access Code
A129: LCR Group 3
When providing Centralized MAT or 
Number Portability, assign the access 
code for the number of digits of the 
network station number.
NOTE:For Centralized MAT or Number 
Portability, this data must be...

 NEAX2000 IVS2 CCIS System ManualPage 94  ND-70918 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
DESCRIPTION DATA
To delete the designated digit of an area 
code:
(1)
(2)YYYY=5000-5255 
LCR Pattern No. 000-255
153: Designation of digit to be deleted
00 : No digit deletion
01-10: Leading 1-8 digits deletion
CCC : No digit deletion
For digit addition, designate the digits to be 
added.
NOTE:Digits are always added in front 
of the number to be dialed.
(1)...

CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 95
Inter-Tenant Connection Assignment
DESCRIPTION DATA
Assign the Tenant number to each station. 
NOTE:When making a link with the IMX,   
Tenant number should be 
assigned as 01-63. 00 is not 
used.
(1)
(2)YY=04 
X-XXXXXXXX: Station No.
00-63: Tenant No. 00-63
01 : Tenant No. 01
Assign the Tenant number to each trunk. 
NOTE:When making a link with the IMX, 
Tenant...

 NEAX2000 IVS2 CCIS System ManualPage 96  ND-70918 (E), Issue 1.0
CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
Example 1: Inter-Tenant Connection for Station-to-Station Calling.
For the inter-tenant connection between Sta. A and Sta. B, the data assignment at Office B is as
follows.
NOTE:The inter-tenant connection between Trunk B and Sta. B (CM63 Y=2) is ineffective.
Command Code 1st Data 2nd Data
CM63 Y=1 01 02
01: Tenant No. of Calling Station (Sta. A)
02: Tenant No. of Called...

CHAPTER 3  SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 97
Example 2: Inter-Tenant Connection for Incoming Call Termination.
For the inter-tenant connection between Trunk C (Office A) and Sta. B (Office B), the data
assignment at Office B is as follows.
NOTE:The inter-tenant restriction between Trunk B and Sta. B (CM63 Y=2) is ineffective.
Command Code 1st Data 2nd Data
CM63 Y=2 01 02
01: Tenant No. of Called Station (Sta....