Home > NEC > Communications System > NEC Neax 2000 Ivs2 Ccis System Manual

NEC Neax 2000 Ivs2 Ccis System Manual

Here you can view all the pages of manual NEC Neax 2000 Ivs2 Ccis System Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 51

 NEAX2000 IVS2 CCIS System ManualPage 38  ND-70918 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
 Data Assignment of Office A
 Data Assignment of Office B
 Data Assignment of Office C
Command Code 1st Data 2nd Data Remarks
CMA7 YY=01
CMA7 YY=02
CMA7 YY=01
CMA7 YY=020
0
1
100001
00002
00001
00003Assign the Originating Point Code and 
the Destination Point Code for CCH0.
Assign the Originating Point Code and 
the Destination Point Code for CCH1.
Command Code 1st Data 2nd...

Page 52

CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 39
Determining CCH Link to Send Messages
Each system MP must be programmed with the proper information indicating to which CCH (in
its own system) every other office in the network is connected. This is required for providing inter-
office services such as Attendant Camp-On, Call Back, and Busy Verification when using CCIS.
In each system, CMA8 is used to inform the local MP...

Page 53

 NEAX2000 IVS2 CCIS System ManualPage 40  ND-70918 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
 Data Assignment of Office C
 Data Assignment of Office D
Example 2:
In this example, there are two connection patterns from Office A to Office D, A-B-D and A-C-B-
D. Office A’s first choice route in the LCR (Least-Cost Routing) Route Pattern Table would be
CCH0 (whatever route the voice channel is assigned to).
The second choice would be to the voice route associated with...

Page 54

CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 41
 Data Assignment of Office B
 Data Assignment of Office C
 Data Assignment of Office D
Determining Numbering Plan
The Uniform Numbering Plan is used for the numbering plan in the No. 7 CCIS network. The
Uniform Numbering Plan is provided by the Least-Cost Routing (LCR) feature, and there are two
types of plans described below.
 Station Number (Closed Numbering)
...

Page 55

 NEAX2000 IVS2 CCIS System ManualPage 42  ND-70918 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
Figure 1-14  Example of Station Number (Closed Numbering)
Figure 1-15  Example of Office Code and Station Number (Open Numbering)
53xx 
53xx 
54xx 
54xx  52xx 
52xx AB
C
Station Numbering 
(Closed Numbering):
 
 When originating a call from Office A to Office C
54xx 
Station Number
Office Location Number
AB
C
Office Code and Station Number 
(Open Numbering):
  When...

Page 56

CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 43
Limitations on developing the Uniform Numbering Plan are as follows:
(1) Station Number (Closed Numbering)
 The dialing number must be formed as follows:
 When providing 3-digit or 4-digit station numbering within the No. 7 CCIS network, the data 
assignment of the Originating Office Number (CMA7 YY=06) is not necessary because the 
Originating Office Number is included...

Page 57

 NEAX2000 IVS2 CCIS System ManualPage 44  ND-70918 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
 LCR Groups 0-3 (CM20>A126-A129) can be used for assigning an LCR access code.
 When providing a pseudo dial tone to alter the dialing access code, LCR Groups 0-2 
(CM20>A126-A128) must be used.
Example 1: Station Number (Closed Numbering)
 When the office location number is distinguished by the 1st or 2nd digit of the dialed station 
number:
 Data Assignment of Office A...

Page 58

CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 45
 When the office location number is distinguished by the 3rd digit of the dialed station 
number:
 Data Assignment of Office A
Command Code 1st Data 2nd Data Remarks
CM20 Y=0
CM8A YYYY=A000
CM8A YYYY=4007
CM8A YYYY=4007
CM8A YYYY=0000
CM8A YYYY=5000
CM8A YYYY=5000
CM10
CMA7 YY=06
CM85 Y=55
3
512
513
1
100
153
XXX
0
513A129
4007
8004
0000
00010
CCC
CCC
512X
NONE
04LCR...

Page 59

 NEAX2000 IVS2 CCIS System ManualPage 46  ND-70918 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
Example 2: Office Code and Station Number (Open Numbering)
 Data Assignment of Office A
Pattern 1 (Used when receiving pseudo dial tone after dialing access code.)
Command Code 1st Data 2nd Data Remarks
CM20 Y=0
CM8A YYYY=A000
CM8A YYYY=4005
CM8A YYYY=4005
CM8A YYYY=4005
CM8A YYYY=0000
CM8A YYYY=5000
CM8A YYYY=5000
CM8A YYYY=9000
CMA7 YY=06
CM10
CM85 Y=58
0
50
51
52
1
100
153...

Page 60

CHAPTER 1 GENERAL INFORMATION
Network Structure Considerations
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 47
 Pattern 2 (Used when not receiving pseudo dial tone.)
Command Code 1st Data 2nd Data Remarks
CM20 Y=0
CM8A YYYY=A000
CM8A YYYY=4007
CM8A YYYY=4007
CM8A YYYY=4007
CM8A YYYY=0000
CM8A YYYY=5000
CM8A YYYY=5000
CMA7 YY=06
CM10
CM85 Y=58
3
850
851
852
1
100
153
0
XXX
851
852A129
4007
8000
0000
0000
00010
CCC
CCC
820
21XX
07
07LCR Group 3
Area Code Development Pattern No. 7...
Start reading NEC Neax 2000 Ivs2 Ccis System Manual

Related Manuals for NEC Neax 2000 Ivs2 Ccis System Manual

All NEC manuals