NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 148  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Call Transfer-Attendant-CCIS
NOTE 1:In the Inter-Tenant Connection Assignment, the Tenant number should be assigned as
01-63. 00 should not be used if connecting to a PBX.
NOTE 2:Refer to Numbering Plan Assignment and assign a dial code to call the attendant by
the LCR feature.
Operating Procedure
To transfer a call to an Attendant Console:
(1) While engaged in a Central Office trunk call, switch hook...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Calling Name Display-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 149
CALLING NAME DISPLAY-CCIS
General Description
This feature provides a display indicating the calling/called par ty’s name, at another switching
office, on the LCD of a D
term or an Attendant Console.
Programming
DESCRIPTION DATA
Provide the system with the Name Display 
service.(1)
(2)255: Name Display
1 : To provide
Specify the number of digits sent to the 
CCIS network to...

 NEAX2000 IVS2 CCIS System ManualPage 150  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Calling Name Display-CCIS
NOTE 1:The maximum number of stations that can be provided with user’s name display is 384.
The maximum number of characters per name is eight, including spaces.
NOTE 2:User’s name can be assigned to Single Line Telephones, and cannot be assigned to
the Attendant Console.
NOTE 3:The trunk name display is provided on a trunk route basis. The maximum amount of
characters in the...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Calling Number Display-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 151
CALLING NUMBER DISPLAY-CCIS
General Description
This feature provides a display indicating the calling/called p arty’s number, at another switching
office via the CCIS network, on the LCD of a D
term or an Attendant Console/Smar t Console.
To transfer the calling par ty number received from the network (ISDN CPN/Caller-ID/MFC or T1-
ANI) transparently between the offices...

 NEAX2000 IVS2 CCIS System ManualPage 152  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Calling Number Display-CCIS
The conditions for transferring calling party number over CCIS related to the Call Transfer, Call
Forwarding feature are described below.
When the Station 300 on the Office B answers the call from the network, and transfers the call to
the Station 301 on the Office B, the calling party number will be displayed on the Station 301.
When the Station 200 on the Office A answers the...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Calling Number Display-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 153
When the call from the network terminates to the Station 300 on the Office B and be forwarded
to the Station 301 on the Office B, the calling party number will be displayed on the Station 301. 
When the call from the network terminates to the Station 200 on the Office A and be forwarded
to the Station 300 on Office B, the calling par ty number will be displayed on the...

 NEAX2000 IVS2 CCIS System ManualPage 154  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
CENTRALIZED BILLING-CCIS
General Description
This feature is used to collect billing information from each office within the network and to direct
it to the associated center office. Billing information is then forwarded to the SMDR of center
office.
Programming
Programming Summary
NOTE:AP00 is required in Local Office/Tandem Office.
NOTE NOTE
DTI LOCAL 
OFFICE
TANDEM 
OFFICE
CCH...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 155
AP Initialization
This section explains the data assignment to make the AP active. If the system already applied
the AP related feature, you can skip the data assignment explained in this section. The AP should
have already been activated if one of the following feature is applied: Station Message Detail
Recording (SMDR), Message Center Interface (MCI), D
term Time...

 NEAX2000 IVS2 CCIS System ManualPage 156  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
DESCRIPTION DATA
Allow the maximum number of Call Record 
for SMDR which is set to “5” by 
CMD001>80/100/120/140.
NOTE:When the data is set to 1-27000, 
external alarm of memory 
overflow is available, if CM44, 
2nd data=3002 is assigned.(1)
(2)24
0 : No limitation
1-27000 : 1-27000 calls
Assign the maximum number of Local of 
fice’s Call Record for Centralized Billing 
office....

CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 157
 
DESCRIPTION DATA
Initialize the billing memory. (1)
(2)0000
CCC
On the AP00 card, set the SW1 switch as 
shown below: 
SW1-4 should be set as follows:
ON: The AP No. is 04-15
OFF: The AP No. is 20-31
NOTE 1:“DATA ERROR” will be indicated when CMD102>000: CCC is entered in case that 
the sum of all call records numbers set by second data of CMD003>23, 24, 25, 26, 
28, 29, 30...