NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 208  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
House Phone-CCIS
Operating Procedure
To call an Attendant in another office:
(1) House Phone-CCIS user lifts the handset.
(2) The Attendant in another office is automatically called. ATND lamps on Attendant Console 
flash and console buzzer sounds. 

CHAPTER 3 SYSTEM DATA PROGRAMMING
Incoming Call Identification-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 209
INCOMING CALL IDENTIFICATION-CCIS
General Description
This feature allows an attendant to visually identify the type of service and/or trunk group which
is arriving or waiting to be answered at the Attendant Console through the CCIS network.
Programming
DESCRIPTION DATA
Specify the ICI key to which an incoming 
call from each trunk route terminates.
(1)
(2)YY=15...

 NEAX2000 IVS2 CCIS System ManualPage 210  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Incoming Call Identification-CCIS
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
Key No.
     Data             Description (Key Label)                    Default Data         
13 F6000 C.O. Incoming 0 (LDN) NONE
14 F6040 Tie Line Incoming 0 (TIE) NONE
15 F6064 Call Forwarding-Busy Line (Busy) NONE
16 F6060 Operator Call (ATND) F6061 (Recall)
17 F6063 Call Forwarding-No Answer (NANS)...

CHAPTER 3 SYSTEM DATA PROGRAMMING
LDN Night Connection-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 211
LDN NIGHT CONNECTION-CCIS
General Description
This feature routes Listed Directory Number (LDN) calls to a predesignated station in the CCIS
network when the Night Mode has been entered.
Programming
DESCRIPTION DATA
Provide the system with Diversion Display. (1)
(2)204
0: To provide
Specify the Incoming Call Identification 
(ICI) key to which each LDN call from each 
trunk...

 NEAX2000 IVS2 CCIS System ManualPage 212  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
LDN Night Connection-CCIS
To provide the LDN Diversion feature, the following programming is also required.
DESCRIPTION DATA
Provide the system with the LDN Diversion 
feature.(1)
(2)205
0: To provide
Assign the data for LDN Diversion to each 
indialed number assigned by CM50 
YY=01.
(1)
(2)YY=00 Tenant No. of the LDN
00 : Effective data in CM35 YY=15
01-08 : LDN key No. 00-07 assigned by 
CM90.
00-63 :...

CHAPTER 3 SYSTEM DATA PROGRAMMING
LDN Night Connection-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 213
DESCRIPTION DATA

(1)
(2)YY=05 Night Mode Diversion for busy 
destination station
Same as CM58 YY=00
Same as CM58 YY=04

(1)
(2)YY=06 Day Mode Diversion for non-an-
swering destination station
Same as CM58 YY=00
00: To ATTCON (NANS key)
08: To TAS

(1)
(2)YY=07 Night Mode Diversion for non-
answering destination station
Same as CM58 YY=00
Same as CM58 YY=06
If the 2nd...

 NEAX2000 IVS2 CCIS System ManualPage 214  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
LDN Night Connection-CCIS
Operating Procedure
No manual operation is required.
DESCRIPTION DATA
If the 2nd data (CXX) is designated by 
CM58 YY=08, 09, specify the combination 
of trunk routes allowing the Tandem 
connection.
(1)
(2)Y=0
XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route for 
CCIS)
0: Allow
If the 2nd data (CXX) is designated by 
CM58 YY=08, 09 assign the Speed...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Link Alarm Display-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 215
LINK ALARM DISPLAY-CCIS
General Description
This feature provides an indication on external equipment when the CCIS link is connected/
disconnected, when the system is initialized or when the CCH is in make busy.
Programming
Hardware Required
DK card × 1/External Equipment Interface on the MP card
External Indicator (Bell, Lamp etc.)
provided by the customer
For the cross...

 NEAX2000 IVS2 CCIS System ManualPage 216  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Message Waiting Lamp Setting-Attendant-CCIS
MESSAGE WAITING LAMP SETTING-ATTENDANT-CCIS
General Description
This feature allows an attendant, in the IMX system, to set or cancel a Message Waiting lamp
indication, through the CCIS network on a station in a PBX system.
Programming
Hardware Required
To provide a Single-Line Telephone with Message Waiting lamp:
LC (PN-4LCD/4LCF) card
Operating Procedure
To...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Message Waiting Lamp Setting-Station-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 217
MESSAGE WAITING LAMP SETTING-STATION-CCIS
General Description
This feature allows a station user in the IMX system to set or cancel a Message Waiting lamp
indication, through the CCIS network, to a station in the PBX system with this feature.
Programming
Hardware Required
To provide a Single-Line Telephone with Message Waiting lamp:
LC (PN-4LCD/4LCF) card...