NEC Neax 2000 Ivs2 Ccis System Manual

 NEAX2000 IVS2 CCIS System ManualPage 218  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Miscellaneous Trunk Access-CCIS
MISCELLANEOUS TRUNK ACCESS-CCIS
General Description
This feature provides access to all types of external and customer-provided equipment/facilities,
such as tie lines and exchange networks, along with Dictation, Paging Access-CCIS, and Code
Calling through the CCIS network.
Programming
Refer to Numbering Plan Assignment and assign the trunk access code using the LCR...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Miscellaneous Trunk Restriction-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 219
MISCELLANEOUS TRUNK RESTRICTION-CCIS
General Description
This feature denies certain stations and dial-repeating tie trunks access to particular trunk
groups, such as tie lines, exchange networks, Dictation, or Paging Access-CCIS through the
CCIS network.
Programming
Assign “1” (Restricted) as the 2nd Data of CM36 when programming the Deluxe Traveling Class...

 NEAX2000 IVS2 CCIS System ManualPage 220  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Night Connection-Fixed-CCIS
NIGHT CONNECTION-FIXED-CCIS
General Description
When the Night Mode has been entered, this service feature routes calls normally directed to the
Attendant Console to a preselected station in another office, through the CCIS network.
Programming
Refer to Direct-In Termination-CCIS on Page 194.
Operating Procedure
To answer a Night Connection-Fixed-CCIS call.
(1) An incoming call...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Night Connection-Flexible-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 221
NIGHT CONNECTION-FLEXIBLE-CCIS
General Description
This feature provides an inter-office Night Connection service, via the CCIS network, when the
calling station and the Night station belong to different offices.
Programming
Refer to Direct-In Termination-CCIS on Page 194.
Operating Procedure
To set the Night Connection-Flexible-CCIS:
(1) The operator or Night...

 NEAX2000 IVS2 CCIS System ManualPage 222  ND-70918 (E), Issue 1.0
This page intentionally left blank. 

NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 223
This page intentionally left blank. 

 NEAX2000 IVS2 CCIS System ManualPage 224  ND-70918 (E), Issue 1.0
This page intentionally left blank. 

CHAPTER 3 SYSTEM DATA PROGRAMMING
Outgoing Trunk Queuing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 225
OUTGOING TRUNK QUEUING-CCIS
General Description
This feature allows a CCIS network station, upon encountering an “all trunks busy” signal, to dial
a specified access code and enter a first-in, first-out queue. As soon as a CCIS trunk becomes
available, stations in the queue will be called back on a first-come, first-served basis.
NOTE:This feature applies to the tie line...

 NEAX2000 IVS2 CCIS System ManualPage 226  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Outgoing Trunk Queuing-CCIS
Operating Procedure
To activate Outgoing Trunk Queuing-CCIS:
(1) Dial the trunk access code; receive dial tone.
(2) Dial the desired number; receive busy tone.
(3) Press the hookswitch momentarily; receive feature dial tone.
(4) Dial the Outgoing Trunk Queuing-CCIS feature access code; receive service set tone.
(5) Replace handset
To cancel Outgoing Trunk Queuing-CCIS:
(1) Dial...

CHAPTER 3 SYSTEM DATA PROGRAMMING
Paging Access-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 227
PAGING ACCESS-CCIS
General Description
This feature provides dial access to paging equipment from an Attendant Console or station
through the CCIS network.
Programming
DESCRIPTION DATA
Assign the Paging Trunk (COT card and 
DK card) to the required LEN.
NOTE:The DK card number must be 
assigned to the first LEN (Level 
0) and third LEN (Level 2) of 
each LT slot.(1)
(2)000-763:...