NEC Itl12d1 User Guide

							
 223 
TO SET PREFIX NUMBERThe procedure below shows how to set Music on Hold
to be heard by DT Series user.
STEP 1: From the Home screen, click  User Setting →
Talk  →  Prefix  → Prefix 1 . 
STEP 2: Enter a prefix number.  
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
STEP 5: If multiple prefixes need to be set, repeat the above procedures. In that case, select   Prefix
2  and  Prefix 3 .Note:
A maximum of 10 digits can be set as a prefix.
OK
OK
Note:
When prefix is added, up to 32 digits including
the prefix can be sent as dial number.  
						

							
 224 
TO SET CLOCK FORMATDetermines whether time is displayed with a 12-hour or
24-hour clock format.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Time Format . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
Menu Item
Meaning
1. Automatic 12-hour clock (default)
2. 12 hour Indication 12-hour clock
3. 24 hour Indication
 24-hour clock
OK
OK  
						

							
 225 
TO ENABLE/DISABLE VOLUME 
LEVEL DISPLAYDetermines whether or not to display the following
volume levels: handset receiver volume, speaker
volume, ringer tone volume and LCD contrast.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Local Volume . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.Menu Item
Meaning
1. Automatic Each volume level is displayed on LCD 
(default).
2. Disable Each volume level is not displayed on 
LCD.
3. Enable
Each volume level is displayed on LCD.OK
OK  
						

							
 226 
TO ENABLE/DISABLE BACKLIGHTThe following explains how to enable/disable the
backlights of LCD and digit keys.
The backlights illuminate (for approximately 10
seconds) when the user presses any key or lift the
handset.
STEP 1: From the  Home screen, click  User Setting →
Display  →  Back Light . 
STEP 2: Make a selectio n from the following list.
STEP 3: Click   button to  save the change to the
database.  STEP  4: The following dialog appears. Click   but-
ton on the dialog.Menu Item
Meaning
1. Automatic Backlights of LCD and digit keys are 
enabled.
2. Disable Backlights of LCD and digit keys are 
disabled.
3. Enable
Backlights of LCD and digit keys are 
enabled.OK
OK  
						

							
 227 
TO CHANGE CHARACTER SIZEThe following explains how to change the displayed
character size on the LCD.
STEP 1: From the Home screen, click  User Setting →
Display  →  Font Size . 
STEP 2: Select  either  1. Standard(16dot) or 2.
Small(12dot)  by clicking the corresponding
radio button.
STEP 3: Click   button to  save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
OK
OK  
						

							
 228 
TO SET A LANGUAGEThe following explains how to set a language to be
displayed on LCD.
STEP 1: From the Home screen, click  User Setting →
Display  →  Language . 
STEP 2: Select a desired language by clicking the cor- responding radio button. STEP 3: Click   button to save the change to the
database. 
STEP  4: The following dialog appears. Click   but- ton on the dialog.
OK
OK  
						

							
 229 
TO RESET TELEPHONE SETTINGSThe following explains how to clear the personal data of
the telephone.
STEP 1: From the Home screen, click  User Setting →
Display  →  Setting Reset . 
STEP 2: Click   button to clear the personal data of the telephone. 
STEP 3: The  confirmation  message appears. Click
 button on the dialog to start the data
clearing.
STEP 4: While clearing the personal data. the follow- ing message appears. STEP 5: When the data clear is complete, the follow-
ing dialog appears.  Click   button on the
dialog.
OK
OK
OK