NEC Itl12d1 User Guide
Have a look at the manual NEC Itl12d1 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
203 MENU LIST FOR DT330 Series Menu List For Call History Menu Item Description Menu Press key while indicating the current time on LCD. Call HistoryTo view call history data. Directory To access Phonebook feature. For details, see PHONEBOOK in chapter 5. Settings To make the user setting of DT Series. Menu Item Description Default Value 1 Call History 1 Incoming Displays the hisotry of incoming calls. The user can also make a call from this menu. - 3 Outgoing Displays the hisotry of outgoing calls. The user can also make a call from this menu. - Menu 123 1
204 Menu List For Settings Menu Item Description Default Value 3 Settings 1 Ring Volume Adjust the ringer tone volume. Level 7 2 Off Hook Ring Enable/disable Off-hook ringing. Enable 3 Back Light Enable/disable the backlights of LCD and digit keys. Enable 4 Headset Enable/disable the ringing of headset. Disable 5 Peripherals Not used. - 3
205 10. O NLINE M ONITORING In Online Monitoring, users can see the following infor- mation on the terminal LCD. - QoS information (RTP Packet Loss (per 5 sec.), Payload, CODEC) - System information -Ping• Conditions for activating Online Moni- toring Menu- Press and hold Help key. Main screen of Online Monitoring will be displayed. - To exit from Online Monitoring, press Exit key. - When just pressing Help key, Help information will be displayed. • Key operation chart Exit 1.QoS 2.Sytem Information 3.Ping Press Help key for two seconds. [1] QoS [1] Lost Packet [2] Codec [3] Payload [2] System Information [1] Network Settings [2] SIP Settings [3] Audio&Visual Settings [4] Maintenance Settings [5] Terminal Information [3] Ping
206 • QoS information (RTP Packet Loss (per 5 sec.), Payloa d, CODEC) Press 1 in main screen, and move to QoS information menu. Following information can be confirmed in QoS infor- mation. - Lost Packet The number of RTP packet receiving loss in currentlast call will be displayed per 5 second. (Displayed in 8 dig- its. Max. value is 99999999.) - Codec - Payload (Payload size) Display pattern of Codec and Payload is as follows. • System InformationPress 2 in main screen, and move to System informa- tion menu. Following information can be confirmed in System information. - Network Settings - SIP Settings - Audio&Visual Settings - Maintenance Settings - Terminal Information Note: For the detail of each Settings, refer to the De- tail of System Information Menu . Codec Payload (msec.) G. 711u 10, 20, 30, 40 G. 711A 10, 20, 30, 40 G. 729a 10, 20, 30, 40 Prev 1.Last Packet 2.Codec 3.Payload: XXXX : G.XXXx : XXms Up Down Prev Exit 1.Network Settings 2.SIP Settings 3.Audio&Visual Settings4.Maintenance Settings 5.Terminal Information
207 To see Network Settings Information Press 1 in System Information menu. Each Network Setting can be confirmed by pressing Up and Down key. Note: To go back to System Information menu, press Prev soft key. To see SIP Settings Information Press 2 in System Information menu. Each SIP Setting can be confirmed by pressing Up and Down key. Note: To go back to System Information menu, press Prev soft key. Prev DHCP Mode Disable/Enable Up Down Prev IP Address XXX.XXX.XXX.XXX Up Down ...Prev 802.1X Status XXXXX Up Down Prev User ID XXXXXUp Down Prev Terminal URI XXXXXUp Down ...Prev Howler Tone Disable/Enable Up Down
208 To see Audio&Visual Settings Information Press 3 in System Information menu. Each Audio&Visual Setting can be confirmed by press- ing Up and Down key. Note: To go back to System Information menu, press Prev soft key. To see Maintenance Settings Information Press 4 in System Information menu. Download address can be confirmed. Note: To go back to System Information menu, press Prev soft key. Prev Confirmation ToneDisable/Enable Up Down Prev Music Default/Download DataUp Down ...Prev DTMF Play Mode ON/OFF Up Down Prev Download Address IP Address is Invalid!!
209 To see Terminal Information Press 5 in System Information menu. Each terminal information can be confirmed by press- ing Up and Down key. Note: To go back to System Information menu, press Prev . PingTo send Ping Press 3 in main screen, and move to Ping menu. Enter IP address of the server to send Ping, and press OK key. Note: If Network Interface is not operated, following message will be displayed. Ping will be sent to the server 4 times. If Retry was selected, screen will back to the Ping menu. Prev Hardware Version XXXXX Prev Mac Address XX:XX:XX:XX:XX:XX Up Down ...Prev Side Option 2 XXXXXUp Down BK Cancel OK PingAdr? 0. 0. 0. 0 Use ‘*’ For . Prev Retry Ping.. XX. XX. XX. XX 1.NG 2.NG 3.NG 4.NG Complete Prev Retry Ping.. XX. XX. XX. XX 1.OK 2.OK 3.OK 4.OK Complete
210 • Detail of System Information Menu System Information Menu Items Network Settings DHCP Mode IP Address Note1 Default Gateway Note1 Subnet Mask Note1 DNS Address Note1 VLAN Mode (for LAN port) VLAN ID (for LAN port) VLAN Priority (for LAN port) Speed & Duplex (for LAN port) PC Port VLAN Mode Note2 PC Port VLAN ID Note2 PC Port VLAN Priority Note2 PC Port Speed & Duplex Note2 PC Port Available EAPOL Forwarding CDP Mode To S ( R T P ) To S ( S I P ) Supplicant Mode EAP Method EAPOL VLAN Mode Account (MD5) 802.1X Status SIP Settings User ID Terminal URI Connecting Server 1st SIP Server Note1 2nd SIP Server Note1 3rd SIP Server Note1 4th SIP Server Note1 Access Mode (to the SIP Server) Port for 1st SIP Server Port for 2nd SIP Server Port for 3rd SIP Server Port for 4th SIP Server Area ID (Country) Authentication Mode Retransmit Interval Keeping Call Howler Tone Audio & Visual Settings Confirmation Tone Music on hold Sidetone Volume Send Gain Receive Bias Receive Gain Ring(Internal Call) Ring(External Call) Volume Indication Language for time display Maintenance Settings Download Address for downloading the firmware System Information Menu Items
211 Note 1: “(DHCP)” is indicated on the display when the parameter is obtained from the DHCP server. (ex.) IP Address Note 2: This item is not displayed on DT710 (ITL- 6DE-1). Terminal Infor- mation Hardware Version MAC Address Firmware Version Bottom option Side Option 1 Side Option 2 System Information Menu Items Prev IP Address(DHCP) XX:XX:XX:XX:XX:XX Up Down
212 11. W EB P ROGRAMMING Web Programming allows the user to configure the terminal settings of DT Series from the PC. The user use Internet browser (Internet Explorer, etc.) to access Web Programming. It is not necessary to install any special application software onto the PC. PC Requirements For Web Programming Note: This feature is only available for DT700 Series. Note: DT700 Series and Web Programming PC needs to be connected to the same network. When downloading the files for Music on Hold, Ringer Tone and Directory to th e DT Series, FTP (TFTP server) is required on the net- work. For details on the FTP service, contact to the System Administrator. Note: Terminal settings through Web Programming is available while the DT700 Series logs into the system. Items Operationg Conditions Operating System Microsoft ® Windows ® XP/Vista CPU Comply with conditions for use of Microsoft ® Windows or Microsoft ® Internet Explorer. Memory Browser Microsoft® Internet Explorer 6.0 or later Monitor SVGA (minimum: 800 × 600 pixel, recommended: 1024 × 768 pixel,) Others Mouse, LAN connection port (RJ-45)