NEC Itl12d1 User Guide

							
 103 
EUROPEAN CHARACTER (LOWERCASE)
TO REGISTER NAME ON ONE-
TOUCH SPEED CALLING KEY
 
 
(Available for 8LD Display terminal.)Press  NAME  button.
Press desired  One-Touch Speed Calling  key.
Enter desired name on the keypad.
Display indicates the name entered.
Press  SET to save the name.
DIGIT 
KEY
1234567890 ∗#
CHARACTER
.adgjmptw0 ∗#
,be
hknqu
x
:cf i lorvy
!
àè ì
5
ñ
s
ù
z
?
áé í ò
β
ú
9
-
âê î ó
7
û
+
ãë ï ô ü
%
ä
34
õ
8
&
åö
/
æ
œ
(
ç
ø
)2 6
=¿ ¡1
Note:
The shaded area indicates the characters which
cannot be entered.
Note:
To delete the entry, press  DEL or BK key and
delete each one character.
Note:
To delete the whole setting, press  CLEAR key
and back to idle status.
DT730
DT3304:26 PM    TUE 13  APR 2004
Push Speed Calling Key
NAME(*)                              >>>^                                                
NEC BNET
SET  CANCEL  CLEAR       >>>4:26 PM    TUE 13  APR 2004
NAME                                   >>>  
						

							
 104 
To Register Speed Calling Number On 8LD 
Display Follow the procedure of To program in To Origi-
nate a Call Using Speed Calling (One-Touch 
Speed Calling Keys) .TO ORIGINATE A CALL USING 
SPEED CALLING (-STATION/
GROUP) 
 
Press  key.
Press the desired speed calling number.
TO ORIGINATE A CALL USING 
SPEED CALLING - SYSTEM 
 
To Program Speed Ca lling – System Key 
(On One-Touch Speed Calling Key)
Press  key.
Press desired  One-Touch Speed Calling  key. The 
LCD displays previously stored digits.
Dial the “Speed Calling – System” access code and 
the abbreviated call code.
Press  key again.
To Operate From Spee d Calling – System 
Key
Press the “Speed Calling – System” key.
If the DT Series does not have the “Speed Calling – 
System” key, dial the “Speed Calling – System” 
access code, then the abbreviated call code.
To Operate From Directory Key (Only DT710 Series and DT310 Series are equipped 
with Directory key.)
Press  key.
Dial the abbreviated call code (maximum of 4 dig-
its).
DT730/710
DT330/310
Redial
XXXXXX
LNR[
 ]/SPD[_ _] –X
*
DT730/710
DT330/310
FeatureFeature
4:26 PM    TUE 13  APR 2004
SPEED SET4:26 PM    TUE 13  APR 2004 XXXXDirectory4:26 PM    TUE 13  APR 2004
XXXX  
						

							
 105 
ACCOUNT CODE 
 
To  E n t e r
Lift handset or press   key, receive dial tone.
Enter feature access code, receive service set 
tone.
Enter “Account Code” (up to 10 digits).
Receive dial tone and dial desired number.
To Enter Account Code After 
Authorization Code
Lift handset or press   key, receive dial tone.
Enter feature access code for “Authorization Code”, 
receive service set tone.
Enter “Authorization Code”, receive second service 
set tone.
Enter “Account Code”, receive dial tone, and dial 
desired number.
FORCED ACCOUNT CODE 
 
Lift handset or press   key, receive dial tone.
Enter feature access code, receive service set 
tone.
Enter “Forced Account Code” (up to 10 digits), receive dial tone.
AUTHORIZATION CODE 
 
To Enter Without Account Code
Lift handset or press   key, receive dial tone.
Enter feature access co
de, receive service set 
tone.
Enter “Authorization Code” (up to 10 digits).
Receive dial tone, dial desired number.
- Or - Lift handset, receive dial tone.
Dial desired number.
If an “Authorization Code” is required, caller hears 
special dial tone.
Enter “Authorization Code ”, or call will be denied.
To Enter With Account Code (see above)Service set tone is optional depending upon system 
programming.
Note:
For North America, Account Codes can be up to
24 digits.
Note:
Authorization and Account Codes may be up to
20 digits combined (or 34 digits combined).
DT730/710
DT330/310
SpeakerSpeaker
DT730/710
DT330/310
Speaker
Note:
For North America, Acco unt Codes can be up to
24 digits.
Note:
For North America, the total number of digits
which can be entered for Authorization and
Account Codes is 34 digits.
Note:
This option is available only if system is pro-
grammed with Least Cost Routing.
DT730/710
DT330/310
Speaker  
						

							
 106 
VOICE CALL 
 
Lift handset.
Dial desired station number.
Press Voice.
Speak to called party.
Using Soft Key
Lift handset.
Dial desired station number;  VOICE Soft Key 
appears while station is ringing.
Press  VOICE  Soft Key. Speak to called party.
TO ANSWER A VO ICE CALL HANDS 
FREE 
 
Receive incoming Voice Call.
Press the  MIC Soft Key or   key. LED lights.
Respond hands-free.
Note:
If a 4-, 8-, 16- or 32-button display terminal is
used, the display indicates all of the digits dialed.
DT730/710
DT330/310
4:26 PM    TUE 13  APR 2004
VOICE 20004:26 PM    TUE 13  APR 2004
2000
MIC >>> VOICE
Note:
A Voice Call may be programmed on a  One-
Touch Speed Calling  key by pressing One-
Touch Speed Calling  key, dialing the extension,
and pressing the   key. ( V displays if pro-
gramming on an DT Series with LCD. Save by
pressing  One-Touch Speed Calling  key.)
Note:
If called party is on their line when a Voice Call is
attempted, calling stations display indicates:
Note:
A voice call is restricted if called partys station is
not a DT Series. Display indicates:
Transfer
4:26 PM    TUE 13  APR 2004
VOICE BUSY4:26 PM    TUE 13  APR 2004
VOICE REST
DT730/710
DT330/310
Mic  
						

							
 107 
AUTOMATIC INTERCOM 
 
To Initiate
Lift handset or press   key.
Press the AICM key.
Hear ringback tone.
To Answer
AICM  key flashes red indicating an incoming inter-
com call. Press 
AICM, lift handset or press   key. LED 
lights solid green.
If called station is engaged in a non-intercom call, 
the station may press  AICM after placing original 
caller on hold (with   key).
To Bridge Into An Automatic Intercom Call
Press the  AICM key, lift handset or press   
key.
A three-party conference is established.
Note:
If privacy is required, lift handset.
Calling station
4:26 PM    TUE 13  APR 2004
VOICE 2001
DT730/710
DT330/310
Speaker
Called party
4:26 PM    TUE 13  APR 2004
ICM 2
Note:
Bridging is an optional feature.
Overriding party
4:26 PM    TUE 13  APR 2004
ICM 1
Speaker
HOLD
Speaker
Overriding party
4:26 PM    TUE 13  APR 2004
OVERRIDE 1  
						

							
 108 
MANUAL INTERCOM  To Initiate
Press MICM, lift handset or press   key, ring-
back tone is heard.
Press the  SIG key if it is desired for the called sta-
tion to hear ringing.
To Answer
MICM  key flashes, indicating  an incoming call. Ring 
tone may also be heard. Press 
MICM.
Lift handset or press   key, LED lights solid 
green.
If called station is engaged in a non-intercom call, 
the station may press  MICM after placing original 
caller on hold (with   key).
To Bridge Into A Manual Intercom Call
Press  MICM, lift handset or press   key.
A three-party conference is established.
4:26 PM    TUE 13  APR 2004
CONF
DT730/710
DT330/310
Speaker
Called party
4:26 PM    TUE 13  APR 2004
ICM 2Calling party
4:26 PM    TUE 13  APR 2004
ICM 1
Note:
Bridging is an optional feature.
Note:
The 
SIG key signals the corresponding station
when speaking over the intercom path is unnec-
essary.
SpeakerHOLD
Speaker
Overriding party
4:26 PM    TUE 13  APR 2004
OVERRIDE 1
4:26 PM    TUE 13  APR 2004
CONF  
						

							
 109 
DIAL INTERCOM 
 
To Initiate
Lift handset or press the   key.
Press DICM key.
Dial desired intercom station number. Receive ring-
back tone.
To Answer
DICM  LED flashes, indicating an incoming intercom 
call.
Press  DICM.
Lift handset or press   key. LCD shows solid 
green.
If called station is engaged  in a non-intercom call, 
the station may press  DICM after placing the origi-
nal call on hold (with   key.)
To Bridge Into A Dial Intercom Call
Press the  DICM key, lift handset or press   
key.
A three-party conference is established.
Note:
Two-button Manual Intercom provides one button
for signalling and one for talking. A separate sig-
naling button can be used in many ways for the
secretary to alert a boss, or vice versa.
DT730/710
DT330/310
Speaker
Called party
4:26 PM    TUE 13  APR 2004
ICM 2
SpeakerHOLD
Note:
Bridging is an optional feature.
Note:
Dial intercom provides a Dial Intercom group
where each member of the group may be called
by a 1- or 2-digit number without using their
prime lines.
Calling party
4:26 PM    TUE 13  APR 2004
ICM 2
Speaker
Overriding party
4:26 PM    TUE 13  APR 2004
OVERRIDE 3
4:26 PM    TUE 13  APR 2004
CONF  
						

							
 110 
CONFERENCE 
 
With call in progress, ask party to hold.
Press   key, receive interrupted dial tone.
Dial desired number.
After call is answered, press   key . The LED 
lights.
Three-way conference is established.
Using Soft Key
With a call in progress, press   key and dial 
desired number.
After call is answered, press  CONF Soft Key.
Three-way conference is established.
If one party hang up, other  two remain connected. 
Conf  LED goes out.
TO ESTABLISH A BROKER CALL  
 
While engaged in a call and wishing to consult a 
third party, press   key. Caller is automati- cally placed on hold.
Dial desired party to consult.
Press   key to return to
 original caller. Third 
party is automatically placed on hold.
By repeating these steps, it is possible to alternate 
between calls.
TO ANSWER A CAMPED-ON CALL 
 
While engaged in a call,  receive the camp-on indi-
cation (one short tone burst). LED of   key 
flashes.
Press   key. Call in progress is placed on 
hold.
Connection to camped-on call is established.
Press   key to return to original call. 
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate 
between calls. Display indicates connected station 
or trunk at any given time.
DT730/710
DT330/310
Transfer
Conf
4:26 PM    TUE 13  APR 2004
CONF
Transfer
4:26 PM    TUE 13  APR 2004
CONF
MIC >>>
DT730/710
DT330/310
Transfer
Note:
The display indicates connected station or trunk
at any given time.Transfer
DT730/710
DT330/310
Answer
AnswerAnswer
type Trunk
number
Trunk
4:26 PM    TUE 13  APR 2004
CAMP ON  DDD 3  
						

							
 111 
CALL WAITING - ORIGINATING  
 
To Program Call Waiting Key (On One-
Touch Speed Calling Key)
Press  key.
Press desired One-Touch Speed Calling  key.
Press  key.  ! appears on LCD.
Dial “Call Waiting” feature access code.
Press  key.
To Activate Call Waiting – Originating
Dial desired station number, receive busy tone.
Press  CALL WAITING .
Receive special ringback tone.
Call waiting tone is sent to busy station.
– Or – Lift handset or press   key.
Dial “Call Waiting” access 
code, receive dial tone.
Dial busy station.
Using Soft Key
Dial desired station and receive busy tone.
Press  CW Soft Key receive call waiting ringback 
tone.
To Answer A Waiting Call
Call Waiting Tone is heard.
Press  key.
Waiting call is automatica lly connected. Original 
party is placed on hold.
By repeatedly pressing   key, it is possible to 
alternate between calls. Display indicates con-
nected station or trunk at any given time.
Note:
To program a hook switch for transfer or feature
activation, press   as first digit. “ !” dis-
plays on LCD.
DT730/710
DT330/310
FeatureRecallFeature
Recall
Called station number
4:26 PM    TUE 13  APR 2004
C WAIT 2000
Speaker
4:26 PM    TUE 13  APR 2004
C WAIT4:26 PM    TUE 13  APR 2004
C WAIT SET 2000
Called station
number
4:26 PM    TUE 13  APR 2004
C WAIT SET 2000
MIC >>>
Answer
Answer  
						

							
 112 
Using Soft Key
Hear burst of tone Display indicates “C WAIT” and 
 key flashes.
Press  key receive  call waiting tone.
To Disconnect
Press   key. Station user is automatically 
connected to original party.
CALL PARK 
 
To Program Call Park Key (On One-Touch 
Speed Calling Key)
Press  key.
Press  One-Touch Speed Calling  key.
Press  key. “ !” displays on LCD.
Dial “Call Park” access code. Press   key again.
To Park A Call
While connected to a station or trunk, press 
CALL 
PARK .
To Retrieve A Parked Call From 
Originating Station
Dial “Call Park” local retrieval code.
Station user is connected to parked call.
To Retrieve A Parked Call From A Remote 
Station
Dial “Call Park” local retrieval code.
Station user is connected to parked call.
Calling station
number
4:26 PM    TUE 13  APR 2004
C WAIT 2001
Answer
Answer
Calling station
number
4:26 PM    TUE 13  APR 2004
C WAIT 2001
MIC >>>
Recall
DT730/710
DT330/310
FeatureRecall
Feature
Parked station or trunk
4:26 PM    TUE 13  APR 2004
CALLPARK SET DDD 3
Elapsed time
4:26 PM    TUE 13  APR 2004
10:01 DDD 2