NEC Dsx 34b Manual

Volume, Brightness, and Contrast Controls
DSX Software ManualFeatures◆391
Features
To set up the display brightness, contrast control, and dial pad illummination presets:
1.
[Menu + Display]
[Menu + MORE  (2 or 3 times) + Dsply]Select the display preset mode.
2.Do one of the following.
a.[Contrast]
[Cont]• Select the display contrast preset.
• When you see 
Contrast ------, press Volume Up and Volume Down to set 
the contrast preset (0-8).
b.[Brightness + Active]
[Brght + Actv]• Select the active...

Walking Class of Service
392◆Features DSX Software Manual
Walking Class of Service
Description
Walking Class of Service allows an extension user to temporarily implement their Toll Restriction and Class 
of Service settings at a co-worker’s keyset. This is normally used to override dialing restrictions at a tele-
phone. For example, an executive with an unrestricted phone can walk to any keyset in the building, imple-
ment Walking Class of Service, and dial without restriction. After the keyset goes...

Walking Class of Service
DSX Software ManualFeatures◆393
Features
Other Related Features
Features
Extension Locking  (page 166)
Extension Locking and Walking Class of Service share the same PIN code.
Single Line Telephones  (page 305)
Walking Class of Service is not available to single line telephone users.
Station Message Detail Recording  (page 328)
When an extension user implements Walking Class of Service and places an outside call, the system 
assigns the SMDR record to the users’s extension. The...

Walking Class of Service
394◆Features DSX Software Manual
4.When you see NEW PIN ACCEPTED:
[Exit]
[Exit]
To change your PIN number (if you already have one assigned):
1.
Press INTERCOM and dial ##6.
2.When you see ENTER PIN CODE: 
• Enter your current PIN number + HOLD.
3.When you see ENTER NEW PIN:
• Enter your new PIN number + HOLD.
• When entering your PIN number: - 
CLEAR erases your entire entry.
- 
REDIAL backspaces over (erases) the last digit entered.
4.When you see REENTER NEW PIN:
• Con firm...

DSX Software ManualIntraMail Features◆395
IntraMail 
Features
IntraMail
Features
Introduction
Introduction
How To Use This Chapter
This chapter provides detailed information on the IntraMail features. Similar to the  Features chapter, the 
IntraMail features in this chapter are in alphabetical order, like a dictionary. This chapter subdivides each 
feature de finition into headings as follows:
❥Description
Read  Description  to get an overview of the feature, its bene fit, any special considerations you...

Start-Up Programming
396◆IntraMail Features DSX Software Manual
Start-Up Programming
Start-Up IntraMail Programming
1.Add additional IntraMail mailboxes as required.
- In  2141-01: Station Mailbox Type  (page 766), enter 
1. This enables a Subscriber Mailbox for the 
extension.
- By default in DSX-80/160, the  first 16 mailboxes are enabled (extensions 300-315).
- By default in DSX-40, the  first 8 mailboxes are enabled (extensions 300-307).
1.In  3112-01: Direct Termination in the Day  (page 819), enter...

Start-Up Programming
DSX Software ManualIntraMail Features◆397
IntraMail 
Features
1.Normally, you should leave the following programs at their default settings:
-1312-01: Voice Mail Extension Number  (page 624) (
500-507).
- 4101-02: Voice Mail Master Number  (page 864) (
700).
- 4111-01: Voice Mail Port Name  (page 865) (
VM PORT #).
- 4112-02: Operator’s Extension  (page 868) (
300)
6.Review this additional programming (not for Built-In Automated Attendant). 

Specifications
398◆IntraMail Features DSX Software Manual
Specifications
Specifications
Built-In Automated Attendant Capacities
MailboxesRouting Mailboxes: . . . . . . . . . . . . . . . . . . . .  8
Call Routing: . . . . . 8
Announcement: . . . 0
Subscriber:. . . . . . . . . . . . . . . . . . . . . . . . . . .  0
Ring Group Mailboxes: . . . . . . . . . . . . . . . . .  0
UCD Group Mailboxes:  . . . . . . . . . . . . . . . .  0
Total:  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ports:2...

Application Examples
DSX Software ManualIntraMail Features◆399
IntraMail 
Features
Application Examples
Examples of Some Common Applications
The examples below show some common applications. The chart in the beginning of each example shows:
❥How the relevant programmable options work by default.
❥The  Application Summary , which provides the basic steps you need to take to set up the application.
Following the chart are the step-by-step instructions for setting up the appl\
ication.
Example 1: Set Up...

Application Examples
400◆IntraMail Features DSX Software Manual
Example 2: Provide Unique Day and Night Dialing Options for Callers
1.Following example 1, set up separate day and night Instruction Menus using Call Rou\
ting Mailboxes 1 
and 2. - The day Instruction Menu can say something like: Thank you for calling. For Sales, dial 301. For Technical Support, dial 302. To talk to an operator, 
dial 0. If you know your party’s extension number, please dial it now.
- The night Instruction menu can say...