NEC Dsx 34b Manual

Transfer
DSX Software ManualFeatures◆361
Features
Call Forwarding and Type 4 (Busy Line) Extension Hunting
Destination Extension
Forwarding Type Ring No Answer Busy In DND
Busy/No Answer
*32• Call rings destination for 
the  1603-01: Transfer 
Recall Timer  interval.
• If unanswered, it rings the  forwarding destination for 
the  1601-03: Call For-
ward No Answer Timer  
interval.
• If still unanswered, it rings  the initial transferring des-
ignating for the 
1601-03: 
Call Forward No Answer 
Timer...

Transfer
362◆Features DSX Software Manual
Programming
Transfer Recall
1.If yes, leave 1603-01: Transfer Recall Timer  (page 675) at its current setting.
2.If no, adjust 1603-01: Transfer Recall Timer  (page 675) as required.
1.For non-operator extensions:
- If yes, leave  1601-03: Call Forward No Answer Timer  (page 670) at its current setting.
- If no, adjust  1601-03: Call Forward No Answer Timer  (page 670) as required.
2.For operator extensions:
- If yes, leave  1603-01: Transfer Recall Timer  (page...

Transfer
DSX Software ManualFeatures◆363
Features
Hotline Automatic Transfer
1.In 2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1401-13: Hotline Automatic Transfer  (page 632) enter Ye s.
3.If no, in 1401-13: Hotline Automatic Transfer  (page 632) enter No.
Other Related Features
Features
Call Coverage Keys  (page 40)
An extension user can use a Call Coverage key to Transfer a call to the covered extension.
Call Forwarding  (page 44)
Call Forwarding...

Transfer
364◆Features DSX Software Manual
Reverse Voice Over (page 289) 
While idle, an extension user can use their Reverse Voice Over key to Transfer calls.
Station Message Detail Recording  (page 328)
The system assigns the SMDR record to the last extension on the call. For example, if extension 306 
answers the call, talks for 20 minutes, and then Transfers the call to extension 302, extension 302 
“owns” the entire call record as soon as they hang up.
Voice Mail  (page 372)
• Pressing 
TRANSFER +...

Transfer
DSX Software ManualFeatures◆365
Features
Operation
Using TransferIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To Transfer your call:
1.
Do not hang up.
2Press TRANSFER.
3.Do one of the following.
a.
Dial your co-worker’s extension. • To Transfer your call directly to your co-worker’s mailbox, do this instead:- Press 
V-MAIL.
- Dial their extension number.
- Hang up.
b.Press a DSS key.
c.Dial a Ring Group or UCD Group master number.
d.
Press a Call Coverage or Hotline key.
•...

Transfer
366◆Features DSX Software Manual
To Transfer a call to your co-worker’s speakerphone (i.e., use Handsfree Transfer):
1. 
Do one of the following.
a.
While on an outside call: • Press 
TRANSFER.
• Dial you co-worker’s extension number.
b.Press Hotline key for your co-worker.
2.Listen for two beeps. • If you hear ringing instead of two beeps, you cannot use Handsfree Transfer.
3.Do one of the following.
a.Press FLASH to send the call directly to your co-worker’s speakerphone.
b.Press TRANSFER to...

Unsupervised Conference
DSX Software ManualFeatures◆367
Features
Unsupervised Conference
Description
Available. See  Tandem Calls / Unsupervised Conference  (page 341) for more. 

User Programmable Features
368◆Features DSX Software Manual
User Programmable Features
Description
User Programmable Features allow an extension user to dial mnemonics to customize the way certain features 
work on their telephone. With User Programmable Features, there is no need to rely on a System Administra-
tor or Communications Manager to set up each phone. These User-Programmable Features include:
❥Call Forwarding Clear All
See  Call Forwarding  (page 44) for more.
❥Direct Station Selection (DSS)...

User Programmable Features
DSX Software ManualFeatures◆369
Features
Hotline#HL #45
#HL + Press flashing Hotline key + Enter exten-
sion for new Hotline partner + 
HOLD + Pro-
gram another Hotline key or 
SPEAKER to exit. 3-5
Off Hook Signaling
#OHS #647 #OHS + Select mode (1 = Outside line, 2 = 
Hotline partner
, 3 = Intercom) + Select option 
(see below) + 
SPEAKER to exit.
For outside lines: 1 = Camp-On tone, 2 = Off-
hook Ringing, 
CLEAR = None
F
or Hotline partner: 1 = Camp-On, 2 = Voice 
Over,...

User Programmable Features
370◆Features DSX Software Manual
Conditions
• None
Default Setting
• Extension 300 has its access level fixed at 5. (This means that by default only extension 300 can dial 
#TD to change the system time and date.)
• All other extensions have access level 3.
Ringing Line Preference
#RLP#757#RLP + Y to enable or N to disable + 
SPEAKER to exit.
2-5
Speed Dial, Personal
#SP#77#SP + Press bin key (for bins 701-710) or dial 
the bin key (701-720) + 
HOLD + Dial outside 
line (e.g.,...