NEC Dsx 34b Manual

Speed Dial
DSX Software ManualFeatures◆321
Features
User Programmable Features
a.Enter the line number you want the system to use when dialing your stored number (1-64).
b.Enter the Line Group number you want the system to use when dialing your stored number (90-98).
c.Press INTERCOM if you want to enter Intercom codes.
6.Press HOLD.
7.Enter the number you want to store (up to 32 digits long).
• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.
• To insert a...

Speed Dial
322◆Features DSX Software Manual
Name Programming Chart
Programming System Speed Dial
Feature Mnemonic Operation Access Level
Speed Dial#SP (#77) #SP + Dial System Speed Dial bin number (e.g., 201) + 
HOLD + Enter outside line (e.g., 1), Line Group (e.g., 90), 
or 
INTERCOM for Intercom feature + HOLD + Number 
to store + 
HOLD twice + Name + HOLD + Dial another 
bin or 
SPEAKER to exit. 4-5
Name Programming Chart
Press a key the indicated number of times for desired character
Key1 Time2...

Split (Alternate)
DSX Software ManualFeatures◆323
Features
Split (Alternate)
Description
With Split, an extension user can split (alternate) between a current call and a new call. Split lets the exten-
sion user easily alternate between the calls without joining (Conferenc\
ing) the parties together.
Conditions
• None
Default Setting
• Split disabled (no Split keys programmed).
Programming
1.To set up a Split Feature Key on an extension:- In  2121-[01 to 24]: Feature Key Codes  (page 758), enter 
20.
-...

Split (Alternate)
324◆Features DSX Software Manual
Operation
Using SplitIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To Split between your current Intercom call and a new Intercom call:
1.
Press HOLD to place your Intercom call on Hold.
2.Press INTERCOM to answer your new Intercom call.
•
INTERCOM winks off (green) to indicate that you have an Intercom call on Hold.
3.Press your Split Feature Key to switch between your two Intercom calls.
To Split between your current outside call...

Station Key Telephones
DSX Software ManualFeatures◆325
Features
Station Key Telephones
Description
The system offers 22-Button, 34-Button, 34-Button Advanced, and Super Display keyset telephones. All 
telephone models are available in two colors: black and white.
System keysets provide a host of sophisticated extension features.
22-Button Display Telephone with Speakerphone
The 22-Button Display Telephone features a large 3 line-
by-24 character alphanumeric display with 4 Interactive 
Soft Keys for...

Station Key Telephones
326◆Features DSX Software Manual
Ring/Message Lamp
Each keyset has a Ring/Message Lamp. Located on the upper right of the keyset faceplate, the Ring/Message 
Lamp indicates for the following features:
Conditions
• None
Default Setting
• Digital station ports  automatically detect the type of connect device when the keyset is plugged in.
34-Button Backlit Super Display Telephone with Half-Duplex Speakerphone
The Super Display Telephone is the system’s most sophis-
ticated telephone...

Station Key Telephones
DSX Software ManualFeatures◆327
Features
Programming
1.In 2101-01: Station Type  (page 719), the system automatically detects the following circuit types when a 
device is connected to a digital station port: -
00 for Unde fined
-01 for DSX 22 Button
-
02 for DSX 34 Button
-
03 for DSX Super Display
-
04 for DS 22 Button Non-display
-
05 for DS 22 Button Display
-
06 for DS 34 Button
-
07 for DS Super Display
-
08 for Cordless Telephone
-
09 for Single Line Telephone
-
10 for...

Station Message Detail Recording
328◆Features DSX Software Manual
Station Message Detail Recording
Description
Station Message Detail Recording (SMDR) provides a record of the system’s outside calls. Typically, the 
record outputs to a customer-provided printer, terminal or SMDR data collection device. SMDR allows you to 
monitor the usage at each extension and line. This makes charge-back and traffic management easier. SMDR 
includes both incoming and outgoing calls, and can be turned off system-wide or...

Station Message Detail Recording
DSX Software ManualFeatures◆329
Features
SMDR Report Format
SMDR Report Format (Page 1 of 2)
LineCharacterField
Report Start Header
1 1-32 STATION MESSAGE DETAIL RECORDING 33,34 Carriage return, line feed
2 1-10 Date (mm/dd/yyyy) 11 Space
12-16 Time (hh:mm:ss) 17 A (for am) or P (for pm)
18,19 Carriage return, line feed
3 1,2 Carriage return, line feed
Call Record Header
1 1-3 - characters 4 + character
5-7 - characters 8 + character
9-40 - characters 41 + character...

Station Message Detail Recording
330◆Features DSX Software Manual
Conditions
• None
Default Setting
• SMDR output disabled.72 Space
73 T
74 Space
3 1-3 - characters 4 + character
5-7 - characters 8 + character
9-40 - characters 41 + character
42-51 - characters 52 + character
53-61 - characters 62 + character
63-70 - characters 71 + character
72-74 - characters
Call Record
1 1-3 Extension number 4 | character
5-7 Line number (2 digits, right justi fied, preceded by 
one space)
8 | character
9-40 Number...