NEC Dsx 34b Manual

Toll Restriction
DSX Software ManualFeatures◆351
Features
Toll Restriction
Description
Toll Restriction limits the numbers an extension user may dial. By allowing extensions to place only certain 
types of calls, the system administrator can control long distance costs\
. The system applies Toll Restriction 
according to an extension’s Toll Restriction Level. For each of the 7 Toll Restriction Levels, the administra-
tor can enable or disable the following options.
❥Active Key Pad (Continuous Dialing)...

Toll Restriction
352◆Features DSX Software Manual
The following chart summarizes these tables.
Toll Restriction Overview
❥When you dial: Telephone Banking
Continued Dialing (Active Key Pad) is enabled or disabled by the setting of  3511-01: Active Key Pad 
(page 840).
❥When you dial: 411, 811
N11 Dialing  is enabled or disabled by the setting of  3512-04: Allow N11 Dialing (page 842).
❥When you dial: 0 203 926 5400
0+ Dialing is enabled or disabled by the setting of  3512-01: Allow 0 + XXX Operator...

Toll Restriction
DSX Software ManualFeatures◆353
Features
❥When you dial: 1010 220 203 926 5400
Equal Access (101 0 XXX) Dialing is controlled by the Equal Access codes entered in  352x-1010-XXX / 
Local XXX (Equal Access Dialing)  (page 844).
- The table entries have no affect on the less common 101X XXX Equal Access dialing.
❥When you dial: 1 800 365 1928, 1 900 555 1212, 1 926 5400
1 + NPA  and 1 + NXX  dialing is controlled by the entries in  353x-1+XXX / TBL-A XXX (NPA/NXX Dial-
ing 3-Digit Table)...

Toll Restriction
354◆Features DSX Software Manual
Programming
Basic Setup
1.In 3501-01: Toll Restriction Country Type  (page 839), set the Toll Restriction Country Type.
- For systems installed in North America, you should select US Domestic  (
1).
1.In 2102-02: Station Toll Level (Day)  (page 724) and 2102-03: Station Toll Level (Night)  (page 724), 
assign a Toll Restriction level to an extension.
1.If yes, in  3511-01: Active Key Pad  (page 840) enter Ye s.
2.If no, in 3511-01: Active Key Pad  (page...

Toll Restriction
DSX Software ManualFeatures◆355
Features
2.If no, in  352x-1010-XXX / Local XXX (Equal Access Dialing)  (page 844) change the table to an allow 
table with no entries. This blocks all 1010 + XXX dialing.
1 + Long Distance Dialing Restrictions
1.If yes, in  353x-1+XXX / TBL-A XXX (NPA/NXX Dialing 3-Digit Table)  (page 846) set up the table.
- Be sure to initialize the table before programming it for the  first time.
- You can make the table a deny table and enter just the codes you want...

Toll Restriction
356◆Features DSX Software Manual
Some Common Toll Restriction Examples
Note that the following 4 examples can be simultaneously programmed in the same system – just do\
n’t rein-
itialize the Toll Restriction Tables in examples 2-4.
Example 1: Allowing Only Local Calling Allow users to dial only 7-digit and 10-digit local numbers. All 1 + 7 digit, 1 + 10 digit, 0+, and Equal 
Access dialing is restricted.
1.Make sure the following are disabled:
•3512-01: Allow 0 + XXX Operator Assisted...

Toll Restriction
DSX Software ManualFeatures◆357
Features
Flash  (page 177)
When an extension user with Toll Restriction enabled  flashes a line, the system enforces Toll Restric-
tion on any digits the user dials from the new dial tone. For example, if an extension user cannot dial 
203 926 5400 before they  flash, they cannot dial 203 926 5400 after they  flash.
Forced Line Disconnect  (page 182)
Forced Line Disconnect does not bypass Toll Restriction.
Last Number Redial  (page 219)
Last Number Redial...

Transfer
358◆Features DSX Software Manual
Transfer
Description
Transfer permits an extension user to send (i.e., extend) an active call to any other extension in the system, 
a Ring Group, UCD Group or voice mail. With Transfer, any extension user can quickly send a call to the 
desired co-worker. A call a user transfers automatically recalls if not picked up at the destination exten-
sion. If a transferred outside call is still unanswered, the call diverts to Key Ring. This assures that users do 
not...

Transfer
DSX Software ManualFeatures◆359
Features
Interaction Between Call Forwarding, Extension Hunting, and Transfer Recall
The following chart shows how the system handles Transfer Recall call routing when both Call Forwarding 
and Extension Hunting are enabled at the destination extension.  Call Forwarding has priority over Exten-
sion Hunting.
Call Forwarding and Type 1 (Ring No Answer Line) Extension Hunting
Destination Extension
Forwarding Type Ring No Answer Busy In DND
Busy/No Answer *32• Call...

Transfer
360◆Features DSX Software Manual
Call Forwarding and Type 2 (Ring No Answer / Busy Line) Extension Hunting
and
Call Forwarding and Type 3 (Ring No Answer / Busy All) Extension Hunting
Destination Extension
Forwarding Type Ring No Answer Busy In DND
Busy/No Answer *32• Call rings destination for 
the  1603-01: Transfer 
Recall Timer  interval.
• If unanswered, it rings the  forwarding destination for 
the  1601-03: Call For-
ward No Answer Timer  
interval.
• If still unanswered, it rings  the...