NEC Dsx 34b Manual

PBX / Centrex Compatibility
DSX Software ManualFeatures◆271
Features
If 1551-04: Account Code Toll Restriction Level  = 0
❥If an extension user:
- Seizes the line,
- Dials a valid PBX Access Code,
- Dials a number that begins with 0 or 1,
DSX requires the user to enter an Account Code for the call.
PBX/Centrex Access Codes and SMDR
The following occurs if a DSX line is programmed as a PBX line and access codes a\
re properly entered in 
the PBX Access Codes Table:
❥If an extension user dials a call that...

PC Program (System Administrator)
272◆Features DSX Software Manual
PC Program (System Administrator)
Description
The PC Program is a WindowsTM-based application you can use for programming the telephone 
system and maintaining site databases, instead of using the conventional telephone programming. 
The PC Program provides:
●On-Line Programming (Direct Connection)
With the PC connected to the telephone system’s serial USB, or Ethernet port, you can make 
immediate changes to the telephone system...

PC Program (System Administrator)
DSX Software ManualFeatures◆273
Features
Conditions
• N/A
Default Setting
• N/A
Programming
N/A
Other Related Features
N/A
Operation
Refer to the  PC Program User’s Guide . 

Prime Line Preference
274◆Features DSX Software Manual
Prime Line Preference
Description
Prime Line Preference allows an extension user to place or answer a call by just lifting the handset. The user 
does not have to press a line key, loop key, or the 
INTERCOM key first. This simpli fies handling calls. In 
programming, you designate a line key, loop key, the 
INTERCOM key, a line, or a Line Group as the exten-
sion’s Prime Line. With a line key, loop key, line, or Line Group, the associated line (or...

Prime Line Preference
DSX Software ManualFeatures◆275
Features
Programming
1.For key:
- In  2114-01: Prime Line Type  (page 741), enter 
1.
- In  2114-01: Prime Line Key  (page 741), enter the number of a line or loop key:
1-14 for Feature Keys 1-24.
00 for INTERCOM.
- This option is not available to single line telephones.
2.For line:
- In  2114-01: Prime Line Type  (page 741), enter 
2.
- In  2114-01: Prime Line Line  (page 741), enter the line number (
1-64).
- This option is also available to single...

Prime Line Preference
276◆Features DSX Software Manual
Operation
User Programmable Feature
Using Prime Line PreferenceIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place a call on your Prime Line:
1.
Lift the handset. • To bypass your prime line, press another key (such as a line or loop key) before lifting the handset.
2.Dial call normally.
Changing your Prime Line Assignment
Feature Mnemonic Operation Access Level
Prime Line Preference#PLA 
(#752) #PLA + Press one of your...

Privacy
DSX Software ManualFeatures◆277
Features
Privacy
Description
An extension with Privacy blocks incoming Barge In attempts and Call Waiting (Camp-On) signals. Privacy 
helps extension users that don’t want their conversations interrupted.
Note that if an extension with Privacy  enabled is on a call with an extension with Privacy  disabled, they are 
still subject to Barge In attempts and Call Waiting signals to the non-private extension.
Conditions
• None
Default Setting
• Privacy disabled in an...

Privacy Release Groups
278◆Features DSX Software Manual
Privacy Release Groups
Description
You can program extensions into Privacy Release Groups to simplify sharing outside calls. Co-workers in 
the same Privacy Release Group can easily join another group member’s outside call just by pressing the 
busy line -key. The co-worker immediately joins in unannounced and uninvited. Privacy Release Groups are 
a quick alternative to Conference where control over the Conference is not required. In a Customer...

Privacy Release Groups
DSX Software ManualFeatures◆279
Features
Programming
1.If yes:
- In  2113-04: Privacy Group  (page 740), enter the Privacy Release Group number (
1-16).
- Make sure the group members have line keys for the lines they want to share.
- In  2131-[01-64]: Line Access  (page 763), assign access to the lines group members should share:
- 
0 for no access
- 
1 for incoming access only
- 
2 for outgoing access onl.
- 
3 for full access
2.If no:
- In  2113-04: Privacy Group  (page 740)...

Private Line
280◆Features DSX Software Manual
Private Line
Description
A Private Line is a line reserved for a keyset for placing and answering calls. A user with a Private Line 
knows when important calls are for them. Additionally, the user has their own line for placing calls that is 
not available to others in the system.
There are three types of Private Lines:
❥Incoming Only
The keyset has a Private Line only for incoming calls. The user cannot place a call on the Private Line. A 
customer service...