NEC Dsx 34b Manual

Line Queuing / Line Callback
DSX Software ManualFeatures◆231
Features
Programming
1.In 2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1411-01: Camp-On to Busy Lines  (page 647) enter Ye s.
- This option  does not restrict Line Callback.
3.If no, in  1411-01: Camp-On to Busy Lines  (page 647) enter No.
1.In 2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1411-02: Line Queue Priority  (page 647) enter Ye...

Line Queuing / Line Callback
232◆Features DSX Software Manual
Operation
Using Line Queuing and Line CallbackIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To queue or leave a callback for a busy line:
1.
Do one of the following.
a.Press the line key for the busy line.
b.Press INTERCOM and dial the Direct Line Access code (e.g., 101 for line 1).
2.Dial 2 and do one of the following.
a.Wait on the line without hanging up for Line Queuing.
b.Hang up for Line Callback.
3.When the line...

Loop Keys
DSX Software ManualFeatures◆233
Features
Loop Keys
Description
Loop keys are Feature Keys that simplify the way extension users place and answer outside calls. There are 
two types of loop keys: Switched Loop keys and Fixed Loop keys.
Switched Loop Keys
For incoming calls, Switched Loop keys provide an appearance for any line  not assigned to a line key for 
which the extension has access and ringing. Switched Loop keys insure that there is a visual appearance for 
lines that do not ring an...

Loop Keys
234◆Features DSX Software Manual
Programming
1.In 2121-[01 to 24]: Feature Key Codes  (page 758), enter 01.
- There is no  Data entry.
1.In 2121-[01 to 24]: Feature Key Codes  (page 758), enter 02.
1.In 2121-[01 to 24]: Feature Key Data  (page 758), enter the Line Group number for the key (90-98).
2.In 3201-[01-64]: Line Group  (page 833), make sure there are lines assigned to the group above.
1.In 2131-[01-64]: Line Access  (page 763), enter one of the following:
-
1 for incoming access only...

Loop Keys
DSX Software ManualFeatures◆235
Features
Ringing Line Preference  (page 295)
Ringing Line Preference allows an extension user to answer a call ringing a loop key just by lifting 
the handset.
IntraMail Features
None
Operation
Using Loop KeysIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To answer a call on a loop key:
1.
Listen for ringing and look for the  flashing (red) loop key.
2.Lift the handset.
3.Press the loop key.
• The loop key will light green after you answer.
• If...

Meet-Me Conference
236◆Features DSX Software Manual
Meet-Me Conference
Description
With Meet-Me Conference, an extension user can set up a telephone meeting with their co-workers. Each 
party joins the Conference by dialing a Meet Me Conference code. Meet Me\
 Conference lets extension users 
have a telephone meeting — without leaving the office. Users must join the meeting within the Meet-Me 
Conference interval.
The system has two Meet-Me Conference codes (#11 and #12). After a Meet-Me Conference is...

Meet-Me Conference
DSX Software ManualFeatures◆237
Features
IntraMail Features
None
Operation
Using Meet-Me ConferenceIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To set up a Meet-Me Conference:
1.
Page parties and announce the Meet-Me Conference code (#11 or #12).
2.Do one of the following. • You and your co-workers must join the conference within the Meet-Me Conference time.
•
INTERCOM fl ashes fast (green) after the  first party joins the Conference; goes out after additional...

Message Waiting
238◆Features DSX Software Manual
Message Waiting
Description
An extension user can leave a Message Waiting indication at a busy or unanswered extension requesting a 
return call. The indication is a flashing 
V-MAIL key and Ring/Message lamp at the called extension. Answer-
ing the Message Waiting automatically calls the extension which left the indication. Message Waiting 
ensures that a user will not have to recall an unanswered extension. It also ensures that a user will not miss...

Message Waiting
DSX Software ManualFeatures◆239
Features
Programming
1.If yes, in  4101-01: Voice Mail Type  (page 863) enter 0.
- The system can have either Message Waiting or voice mail, not both.
1.If no, in  4101-01: Voice Mail Type  (page 863) enter on of the following:
-
1 for Built-In Automated Attendant
-
2 for IntraMail
-
3 for UltraMail (DSX-80/160 only)
-
4 for external
1.In  2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1403-03: Special...

Message Waiting
240◆Features DSX Software Manual
Operation
Using Message WaitingIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To leave a Message Waiting:
1.
Place Intercom call to a co-worker. • The extension you call can be unanswered, busy, or in Do Not Disturb.
2.Press V-MAIL.
3.Hang up.
To answer a Message Waiting:
1.
Look at your V-MAIL key and Ring/Message Lamp - they should be  flashing (red).
2.Press INTERCOM + V-MAIL.
• The system cancels the Message Waiting if the extension...