NEC Dsx 34b Manual

Flexible Numbering Plan
DSX Software ManualFeatures◆181
Features
1.If yes:
- In  1301-[01-10]: Function Type  (page 620), assign another digit (except 3) to type 
2 (extension 
access).
- In  1301-[01-10]: Expected Number of Digits  (page 620), change the expected digits option for the 
new digit to 
3.
- In  1311-01: Station Extension Number  (page 623), change the extension numbers to use the leading 
digit selected above.
2.If no, leave the above options at their default settings.
1.See  9031-Station...

Forced Line Disconnect
182◆Features DSX Software Manual
Forced Line Disconnect
Description
Forced Line Disconnect allows an extension user to disconnect (release) another extension’s active outside 
call. Forced Line Disconnect lets a user access a busy line in an emergency, when no other lines are avail-
able. Maintenance technicians can also use Forced Line Disconnect to release a line on which there is no 
conversation. This can happen if a line does not properly disconnect when the outside \
party...

Forced Line Disconnect
DSX Software ManualFeatures◆183
Features
Operation
Using Forced Line DisconnectIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To disconnect a busy line:
1.
Do one of the following.
a.Press the line key for the busy line.
b.Press INTERCOM and dial the line’s extension number (e.g., 101 for line 1).
2.When you hear busy tone, dial # to disconnect the line.
• You hear Intercom dial tone and the line key goes out.
• You can now place a new call on the line. 

Group Call Pickup
184◆Features DSX Software Manual
Group Call Pickup
Description
Group Call Pickup allows an extension user to answer a call ringing an extension in their assigned Pickup 
Group. This permits co-workers in the same Pickup Group to easily answer each other’s ringing calls. The 
user can intercept the ringing call by dialing a code or pressing a prog\
rammed Group Call Pickup key. The 
system has a maximum of eight Pickup Groups, with an unlimited number of\
 extensions in each group....

Group Call Pickup
DSX Software ManualFeatures◆185
Features
1.In 2121-[01 to 24]: Feature Key Codes  (page 758):
- For an Immediate Ring Group Call Pickup key, assign key code 09.
- For a No Ring (Lamp Only) Group Call Pickup key, assign key code 10.
- For a Delay Ring Group Call Pickup key, assign key code 11.
2.In  2121-[01 to 24]: Feature Key Data  (page 758), enter the number of the Pickup Group (1-8) the key 
will cover.
1.In  2402-[01-60]: DSS Console Key Codes  (page 801):
- For an Immediate Ring...

Group Call Pickup
186◆Features DSX Software Manual
Operation
User Programmable Feature
Answering a Pickup Group CallIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To answer a call ringing a phone in your Pickup Group:
1.
Lift the handset.
2.Do one of the following.
a.Press the  flashing Group Call Pickup key.
b.Press INTERCOM and dial *#.
Changing the Group Call Pickup Key Ringing
Feature Mnemonic Operation Access Level
Group Call Pickup#RA (#72) #RAP + Group Call Pickup key repeatedly...

Group Listen
DSX Software ManualFeatures◆187
Features
Group Listen
Description
Group Listen permits a keyset user to talk on the handset and have their caller’s voice broadcast over the 
telephone speaker. This lets the keyset user’s co-workers listen to the conversation. Group Listen turns off 
the keyset’s Handsfree microphone so the caller does not hear the co-worker’s voices during a Group Listen. 
When a keyset user sets up Group Listen, they hear their caller’s voice over the telephone speaker as...

Group Listen
188◆Features DSX Software Manual
Operation
Using Group ListenIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To set up Group Listen:
1.
Place or answer a call using the handset.
2.Press SPEAKER twice (but do not hang up).
•
SPEAKER  fl ashes slowly red.
3.Talk to the caller through your handset.
• You and your co-workers hear your caller’s voice over your telephone speaker.
• Your handsfree microphone and handset receiver are off.
To talk Handsfree after initiating Group...

Group Ring
DSX Software ManualFeatures◆189
Features
Group Ring
Description
Group Ring allows you to arrange extensions into Ring Groups for answering calls. When a call comes into 
the Ring Group master number, all extensions in the group ring simultaneously. Any user in the Ring Group 
can answer the call just by lifting the handset. The ringing call can be:
❥A Direct Inward Line to the Ring Group (i.e., terminated to the Ring Group master n\
umber).
❥An outside call transferred to the Ring Group...

Group Ring
190◆Features DSX Software Manual
Programming
Basic Programming
1.If yes, in 2113-02: Ring Group  (page 738) enter the Ring Group (1-8) to which the extension belongs.
2.If no, in 2113-02: Ring Group  (page 738) enter 0.
1.If yes, in 2201-01: Ring Group Name  (page 779) enter the Ring Group name.
- The name shows on a keyset user’s display when they call the Ring Group.
2.If no, leave  2201-01: Ring Group Name  (page 779) at its default setting.
1.If yes, in 2201-02: Ring Group Incoming Ring...