NEC Dsx 34b Manual

Door Box
DSX Software ManualFeatures◆151
Features
Transfer  (page 358)
An extension user cannot Transfer a call to a Door Box.
IntraMail Features None
Operation
Calling from the Door BoxIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place a call from the Door Box:
1.
Press the Door Box call button.
2.When someone inside the building answers your call, speak toward the Door Box. • Once you press the call button, you can not control the call. You must wait for someone to answer....

Equal Access Compatibility
152◆Features DSX Software Manual
Equal Access Compatibility
Description
See Toll Restriction  (page 351) for more. 

Extended Ringing
DSX Software ManualFeatures◆153
Features
Extended Ringing
Description
Extended Ringing forces an unanswered call to ring a telephone an extended number of times before rerout-
ing. This helps a users that cannot get to their phone quickly to pick up cal\
ls (such as a warehouse worker). 
Extended Ringing is available with the following features:
❥Direct Inward Line
DILs ring for an extended period before routing to the over flow destination.
❥Transfer
Transferred outside calls ring for...

Extension Hunting
154◆Features DSX Software Manual
Extension Hunting
Description
Extension Hunting routes calls to a predefined group of hunt group member extensions. A call rings in 
sequence through the hunt group until answered at a member extension. Extension Hunting is helpful, for 
example, for a group of co-workers that share responsibility for answering calls. Each call cycles through the 
group until an available member picks it up.
There are three types of Extension Hunting:
❥Circular Hunting...

Extension Hunting
DSX Software ManualFeatures◆155
Features
Circular Hunting Notes:
❥For type 3 hunting, an Intercom call will stop hunting when it voice-announces. Extension Hunting fol-
lows the Handsfree Answerback/Forced Intercom Ringing setup at each extension.
❥Placing an extension in DND temporarily removes it from the Circular Hunting group.
Terminal Hunting
A Terminal Hunting group consists of a group of extensions programmed into a Terminal Hunting list. A call 
unanswered at a member extension...

Extension Hunting
156◆Features DSX Software Manual
❥Calls to the “dummy” extension activate the Call Coverage keys on the covering extensions.
❥Co-workers can transfer calls into the group. They will ring all Call Coverage keys for the group. If unan-
swered, a call transferred into the group follows the programmed UCD Group over flow destination (as 
do unanswered calls). It will not recall to the transferring party.
❥A  UCD Master  night key for the group will control the night termination of any...

Extension Hunting
DSX Software ManualFeatures◆157
Features
Programming
Setting Up Circular Hunting
1.In 2115-01: Hunt Type  (page 746), assign the hunt type for each extension in the group.
-
1 = Ring No Answer Outside Calls
-
2 = Busy/Ring No Answer Outside Calls
-
3 = Busy/Ring No Answer All Calls
-
4 = Busy Outside Calls
1.In  2115-01: Hunt Destination  (page 746), set up the circular hunt routing.
- Each extension should route to the next in the group.
- The last extension should route back to the...

Extension Hunting
158◆Features DSX Software Manual
1.If yes:
- Leave  1601-03: Call Forward No Answer Timer  (page 670) and 1603-01: Transfer Recall Timer  
(page 675) at their current settings.
2.If no:
- To change how long the  first member of the group rings, adjust  1603-01: Transfer Recall Timer 
(page 675) as required.
- To change how long the next and succeeding members of the group ring, adjust  1601-03: Call For-
ward No Answer Timer  (page 670) as required.
1.If yes, leave 1601-02: DIL No...

Extension Hunting
DSX Software ManualFeatures◆159
Features
Setting Up UCD Hunting
1.In 2115-01: Hunt Type  (page 746), make sure each extension in the UCD Group has hunt type 05.
1.In 2115-01: UCD Group Master Number  (page 746), make sure each extension in the same UCD Group 
has the same master number. - Normally, group 1 (master number 700) is reserved for voice mail.
1.If yes, assign new master numbers in  1315-01: UCD Group Master Extension Number  (page 627).
2.If no, leave the assignments in...

Extension Hunting
160◆Features DSX Software Manual
Extension Hunting Timers
The following diagrams show how the system implements various timers when handling Extension Hunt-
ing calls.
Transfer to Hunt GroupBusy/Ring No Answer All Calls (Type 3)
Circular and Terminal Hunting
1603-01: Transfer Recall Timer  
(page 675)
1601-03: Call Forward No Answer  Timer (page 670) Call rings 
first member for Transfer Recall time.
Call transferred into hunt group.
If unanswered, call rings the next and succeeding...