NEC Dsx 34b Manual

Direct Inward Line
DSX Software ManualFeatures◆111
Features
DIL Over flow
1.If yes:
- In  3112-02: Enable Day Over flow  (page 819) enter 
Ye s.
- In  3112-03: Day Over flow Destination  (page 820) enter the day over flow destination. The destina-
tion can be:
- An  extension
- A UCD Group master number
- The voice mail master number
- A Ring Group master number
- Key Ring (by pressing
 CLEAR)
2.If no, in  3112-02: Enable Day Over flow  (page 819) enter No.
1.If yes:
- In  3112-05: Enable Night Over flow...

Direct Inward Line
112◆Features DSX Software Manual
Setting Up Line and Loop Keys
1.For line keys:
- In  2121-[01 to 24]: Feature Key Codes  (page 758), enter 
03.
- In  2121-[01 to 24]: Feature Key Data  (page 758), enter the DIL line number (
1-64).
- If an extension doesn’t have any line keys, you should assign Fixed or Switched Loop keys to 
make handling outside calls easier.
2.For Fixed Loop keys:
- In  2121-[01 to 24]: Feature Key Codes  (page 758), enter 
01.
3.For Switched Loop keys:
- In...

Direct Inward Line
DSX Software ManualFeatures◆113
Features
Other Related Features
Features
Call Forwarding  (page 44)
Call Forwarding will reroute an extension’s DILs.
Call Waiting / Camp-On  (page 58)
A DIL to a busy extension will send Camp-On tones (if the extension is programmed to normally 
receive Camp-On tones).
Central Of fice Calls, Answering  (page 74)
Central Of fice Calls, Placing  (page 78)
Refer to these features to set additional parameters for lines (such as\
 transmit gain, receive gain...

Direct Inward Line
114◆Features DSX Software Manual
Operation
Handling Your Direct Inward LinesIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To answer a call on your Direct Inward Line:
1.
The line or loop key for your DIL  flashes green.
2.Lift handset.
• The key lights on green when you connect to your caller.
To place your Direct Inward Line into the Night Mode:
1.
Press DND.
• Your DND  flashes.
• This also enables Do Not Disturb for your extension. 

Direct Line Access
DSX Software ManualFeatures◆115
Features
Direct Line Access
Description
Direct Line Access lets an extension user access (seize) an individual line. After seizing the line, the user can 
dial any outside telephone number without restriction. An extension’s Class of Service allows or denies 
Direct Line Access. Direct Line Access is normally only provided for attendants, priority users and mainte-
nance personnel.
Conditions
• None
Default Setting
• Enabled for Class of Service 1 (the...

Direct Line Access
116◆Features DSX Software Manual
Operation
Using Direct Line AccessIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place a call over a specific line using Direct Line Access:
1.
Lift the handset.
2.Press INTERCOM.
3.Dial 1 plus the line number (e.g., 01 for line 1).
• If you hear busy tone, you may be able to dial 2 to queue for the line. See  Line Queuing / Line Callback 
(page 230) for more.
4.Dial the outside number. 

Direct Station Selection (DSS)
DSX Software ManualFeatures◆117
Features
Direct Station Selection (DSS)
Description
If an extension’s Direct Station Selection (DSS) Keys are enabled, Feature Keys  automatically become 
Direct Station Selection (DSS) keys when the user presses 
INTERCOM. Direct Station Selection provides an 
extension user with one-button Intercom access and Transfer to co-workers. Each DSS key also provides a 
Busy Lamp Field (BLF) for the assigned co-worker.
Conditions
• DSS keys do not...

Direct Station Selection (DSS)
118◆Features DSX Software Manual
Programming
1.If yes:
- In  2111-03: Enable DSS/BLF Keys  (page 731), enter 
Ye s.
- In  2114-01: Prime Line Key  (page 741), do not enable Intercom Prime Line. This prevents the 
extension’s line keys from switching to DSS mode when the user lifts the handset while idle\
.
2.If no, in  2111-03: Enable DSS/BLF Keys  (page 731) enter No.
1.If yes, in 2123-[01-24]: DSS/BLF Key Assignments  (page 760) program the extension’s DSS assignments....

Direct Station Selection (DSS)
DSX Software ManualFeatures◆119
Features
Operation
User Programmable Feature
Placing a Call using a DSS KeyIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place a call to a co-worker using a DSS key:
1.
Lift the handset.
2.Press INTERCOM.
• Your DSS keys show the status of the assigned extension: Off = Idle
On = Busy or ringing
Fast  flash = in Do Not Disturb
3.Press DSS key for the co-worker you want to call.
Transferring a Call using a DSS KeyIn these...

Direct Station Selection (DSS) Console
120◆Features DSX Software Manual
Direct Station Selection (DSS) Console
Description
The DSS Console (P/N 1090024 for black and P/N 090029 
for white) gives a keyset user one-button access to exten-
sions, lines, and selected features. This saves time for users 
that do a lot of call processing such as operators or dis-
patchers).
The system allows you to install 4 DSS Consoles maxi-
mum per system. DSS Consoles use their own digital sta-
tion port and do not...