NEC Dsx 34b Manual

Conference, Meet-Me
DSX Software ManualFeatures◆91
Features
Conference, Meet-Me
Description
Turn to  Meet-Me Conference  (page 236). 

Conference, Unsupervised
92◆Features DSX Software Manual
Conference, Unsupervised
Description
Turn to Tandem Calls / Unsupervised Conference  (page 341). 

Contrast Controls
DSX Software ManualFeatures◆93
Features
Contrast Controls
Description
Turn to  Volume, Brightness, and Contrast Controls  (page 388). 

Cordless Telephone
94◆Features DSX Software Manual
Cordless Telephone
Description
The DSX Cordless Lite II Telephone (P/N 730087) is a 900 Mhz digital narrow band FM cord-
less telephone that provides mobility, flexibility and convenience for those who spend much of 
the workday away from their desk. Fully integrated with the DSX system, the DSX Cordless 
Lite II Telephone offers many standard features such as Call Forwarding, Call Coverage, Hot-
line, and Voice Mail. Complemented by 4 fully programmable...

Delayed Ringing
DSX Software ManualFeatures◆95
Features
Delayed Ringing
Description
Delayed Ringing allows a line to start ringing a preset interval  after the call starts  flashing a line key. This is 
helpful for co-workers that cover each other’s calls. For example, a secretary can have Delayed Ringing for 
the lines that ring the boss’s telephone. If the boss doesn’t answer after the Delayed Ringing interval, the call 
will start ringing the secretary’s extension.
Conditions
• None.
Default Setting
•...

Dial Number Preview
96◆Features DSX Software Manual
Dial Number Preview
Description
Dial Number Preview lets a display keyset user dial and review a number before the system dials it out.
Conditions
• None.
Default Setting
• Enabled
Programming
None
Other Related Features
FeaturesCentral Of fice Calls, Placing  (page 78)
Dial Number Preview allows an extension user to review a number before the system dials it out.
IntraMail Features None
Operation
Dial Number Preview helps the user avoid dialing...

Dial Number Preview
DSX Software ManualFeatures◆97
Features
4.Press a line key to have the system automatically dial the displayed number.
Dial Number Preview Editing ExampleIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To replace 2049265410 with 2039265400:
1.
Dial * followed by 2049265410. You  see: 2049265410-
2.Press Volume Up until you see: 20-9265410
3.Dial 3. You  see: 203-265410
4.Press Volume Down until you see: 20392654-0
5.Dial 0. You  see: 203926540-
6.Press Volume Down...

Dial Tone Detection
98◆Features DSX Software Manual
Dial Tone  Detection
Description
The system can optionally detect precise CO dial tone for automatically \
dialed outside calls (such as Speed 
Dial and Auto Redial calls). With Dial Tone Detection enabled for a line, the system will monitor the line 
when initially seized for valid dial tone or stutter dial tone. If valid EIA/TIA dial tone is detected, the system 
outdials the call on the line. If dial tone is not detected within 2 sec\
onds, the...

Direct Inward Dialing
DSX Software ManualFeatures◆99
Features
Direct Inward Dialing
Description
Direct Inward Dialing (DID) lets outside callers directly dial system extensions. DID saves time for callers 
who know the extension number they wish to reach. To place a DID call, the outside caller dials the local 
exchange (NXX) and additional digits to ring the telephone system extension. For example, DID number 
926-5400 can directly ring extension 400. The caller does not have to rely on an attendant or...

Direct Inward Dialing
100◆Features DSX Software Manual
- If the telco doesn’t send any digits into the system, or
If the digits sent by the telco don’t correspond to a DID Translation Table entry, or
If the destination extension is out of service:
The call follows the 3112-Termination routing for the line. This includes the settings for Day Ter-
mination, Day Over flow, Night Termination, and Night Over flow. The call is handled the same as 
an analog line and follows the normal system timers.
- If the...