NEC Dsx 34b Manual

Call Forwarding Off Premises
DSX Software ManualFeatures◆51
Features
Call Forwarding Off Premises
Description
Off Premises Call Forwarding allows a keyset user to forward their calls to an off-site location (such as a cell 
phone or remote of fice) if allowed by their Class of Service. Keyset users can stay in touch by having Off 
Premises Call Forwarding automatically forward their calls while they are away from the of fice. To set up 
Off Premises Call Forwarding, the user selects the line or Line Group...

Call Forwarding Off Premises
52◆Features DSX Software Manual
• An extension Speed Dial number stored in bin 719 should not be longer than 1\
6 digits. If it is, the sys-
tem automatically clears bin 719 when it stores an Off Premises Call Forwarding number in bin 720.
• An extension user cannot off premise call forward to a Personal Speed Dial bin that contains an Inter- com number. If the user selects a bin that contains an Intercom number, the system cancels Off Pre-
mises Call Forwarding.
• Off...

Call Forwarding Off Premises
DSX Software ManualFeatures◆53
Features
Other Related Features
Features
Call Forwarding  (page 44)
Call Forwarding permits an extension user to redirect their call to another extension.
Single Line Telephones  (page 305)
Call Forwarding Off Premises is not available at single line telephones.
IntraMail Features None
Operation
Activating or Canceling Call Forwarding Off PremisesIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To activate Call Forwarding:
1....

Call Forwarding Off Premises
54◆Features DSX Software Manual
c.To  view the currently enabled Off Premises Call Forwarding number (if any):
[VIEW]
[View]Select to view the currently stored number.
• Press 
SPEAKER to exit the view mode.
4.Select the Call Forwarding mode.
[All]
[All]Select forwarding all calls.• Alternately dial 
2.
[Line Only]
[Line]Select forwarding outside calls only.• Alternately dial 
8.
Activating or Canceling Call Forwarding Off PremisesIn these instructions:[Super Display Soft...

Call Timer
DSX Software ManualFeatures◆55
Features
Call Timer
Description
Call Timer lets a keyset user with a Call Timer key time their outside calls on the telephone display. There 
are two types of Call Timer keys:
❥Manual Call Timer
Any time while placing a call or while on a call, a display keyset user can press their Manual Call Timer 
key to start the Call Timer. The Call Timer will continue until the user hangs up or presses their Manual 
Call Timer key again.
❥Automatic Call Timer In addition...

Call Timer
56◆Features DSX Software Manual
Other Related Features
Features
Caller ID  (page 63)
The Auto Timer feature interacts with Caller ID on the  first line of the telephone display.
Central Of fice Calls, Placing  (page 78)
Call Timer shows the time a user has been on an outside call.
Flash  (page 177)
Flash restarts the Call Timer.
Hold  (page 202)
A user’s Call Timer starts when they pick up a call from Hold. If they place the call on Hold and 
another user picks it up, the timer restarts for the...

Call Timer
DSX Software ManualFeatures◆57
Features
Stopping and Restarting the Call Timer for Your CallIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To stop the Call Timer:
1.
Do one of the following.
a.[Timer]
[Time]Press the Call Timer soft key.
b.Press the Manual or Automatic Call Timer key.
2.The Call Timer disappears from the display.
To restart the Call Timer:• The timer will restart from 00:00.
1.Do one of the following.
a.[Timer]
[Time]Press the Call Timer soft key.
b.Press...

Call Waiting / Camp-On
58◆Features DSX Software Manual
Call Waiting / Camp-On
Description
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) without hanging 
up. When the user Camps-On (by dialing 2), the system signals the busy extension with two beeps indicating 
the first waiting call. (The busy extension can be on a handset or Handsfree call.) The call goes through when 
the extension becomes free.
If an extension has more than one caller waiting, they queue on...

Call Waiting / Camp-On
DSX Software ManualFeatures◆59
Features
Programming
1.In 2102-01: Class of Service  (page 724), check the sending extension’s Class of Service level.
2.If yes, in 1402-03: Camp-On to Busy Extension  (page 633), enter Ye s for the initiating extension.
- Check step 2 below to be sure Camp-On is not blocked by the receiving extension.
- This option does not restrict Callback.
3.If no, in  1402-03: Camp-On to Busy Extension  (page 633) enter No.
1.In 2102-01: Class of Service  (page...

Call Waiting / Camp-On
60◆Features DSX Software Manual
Other Related Features
Features
Attendant Position  (page 24)
An extension user cannot Camp-On to the attendant because the attendant’s extension is never busy.
Callback  (page 61)
If an extension user Camps-On and then hangs up, the system converts the Camp-On to a Callback.
Caller ID  (page 63)
An extension programmed to receive Camp-On tones or Off-Hook Ringing from a waiting call will 
also receive Second Call Caller ID.
Direct Inward Line...