NEC Dsx 34b Manual

Central Office Calls, Placing
DSX Software ManualFeatures◆81
Features
Access Code Options
1.For single digit access:
- In  1301-[01-10]: Function Type  (page 620), check to be sure the digit 9 is type 
3 (Line Group).
- In  1301-[01-10]: Expected Number of Digits  (page 620) for the digit 9, enter 
1.
- In  2113-01: Dial 9 Group  (page 738), assign the Line Group the extension will reach when the user 
dials 
9.
2.For 2-digit access:
- In  1301-[01-10]: Function Type  (page 620), check to be sure the...

Central Office Calls, Placing
82◆Features DSX Software Manual
Setting Up Transmit and Receive Gain
1.If yes, leave 3103-01: Transmit Gain  (page 814) for the line at it’s current value.
2.If no, in 3103-01: Transmit Gain  (page 814) adjust the line’s transmit gain as required.
1.If yes, leave 3103-02: Receive Gain  (page 814) for the line at it’s current value.
2.If no, in 3103-02: Receive Gain  (page 814) adjust the line’s receive gain as required.
- For a “hot” (high gain) line, decreasing the receive...

Central Office Calls, Placing
DSX Software ManualFeatures◆83
Features
Other Related Features
Features
Account Codes  (page 14)
You can use Store and Forward with Forced Account Codes.
Automatic Handsfree  (page 30)
With Automatic Handsfree, an extension user can press a line key to place an outside call without  first 
lifting the handset or pressing 
SPEAKER. Users without Automatic Handsfree can preselect a line 
key before lifting the handset or pressing 
SPEAKER.
Call Timer  (page 55)
The Call Timer...

Central Office Calls, Placing
84◆Features DSX Software Manual
Operation
Placing Outside Calls Using Line KeysIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place an outside call over a specific line using a line key:
1.
Lift handset.
2.Press line key. • You hear dial tone on the line you select and the line key lights green.
• To use loop keys for placing calls, see  Loop Keys (page 233).
3.Dial outside number.
Placing Outside Calls Using Line Dial-up or Direct Line AccessIn these...

Central Office Calls, Placing
DSX Software ManualFeatures◆85
Features
Using Store and Forward
Feature NameIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place an outside call using Store and Forward:
1.
 Do one of the following.
a.Press INTERCOM and dial 9.
• You may optionally be able to dial 
90-98.
b.Press a Switched Loop key + Dial Line Group number (90-98).
c.Press Fixed Loop key.
2.Dial the outside telephone number.
3.When you have  finished dialing, wait 6 seconds or dial # for...

Check Key
86◆Features DSX Software Manual
Check Key
Description
A keyset user can use the CHECK key to check keyset and DSS Console Feature Key assignments and Per-
sonal Speed Dial bin names.
Conditions
• None
Default Setting
• Enabled
Programming
None
Other Related Features
FeaturesDirect Station Selection (DSS) Console  (page 120)
Check DSS Console Feature Key assignments.
Feature Keys  (page 169)
Check Feature Key assignments.
Speed Dial  (page 315)
Check Personal Speed Dial bin assignments....

Check Key
DSX Software ManualFeatures◆87
Features
a.Press the Personal Speed Dial bin key once to display the name for the lower numbered bin.
• For example, pressing bin 1 in this step displays the name for 701.
b.Press the Personal Speed Dial bin key a second time to display the number stored in the lower num-
bered bin.• For example, pressing bin 1 in this step displays the number stored for 701.
c.Press the Personal Speed Dial bin key a third time to display the name for the higher numbered bin.•...

Class of Service
88◆Features DSX Software Manual
Class of Service
Description
Class of Service (COS) sets various features and options for extensions and outside lines. The system allows 
any number of extensions and lines to share the same Class of Service. The Class of Service options are pro-
vided by the following programs:
❥140x-Station Options
-1401-Features  (page 628)
- 1402-Access  (page 633)
- 1403-SLT’s (Single Line Telephone Options)  (page 635)
- 1404-Caller ID  (page 638)
-...

Conference
DSX Software ManualFeatures◆89
Features
Conference
Description
Conference lets an extension user add additional inside and outside callers to their conversation. The follow-
ing table shows the system’s Conference capacities:
The system’s 32 Conference circuits are dynamically allocated as users request them\
.
Conditions
• None.
Default Setting
• Conference enabled.
Programming
None
Other Related Features
FeaturesHold  (page 202)
If an extension user places a Conference on Hold, no other...

Conference
90◆Features DSX Software Manual
Operation
Setting up a ConferenceIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To set up a Conference:
1.
Establish an Intercom or outside call.
2.Press CONF.
• Your hear Intercom dial tone.
• Your caller hears Music on Hold (if installed) while they wait for you to set up the Conference.
3.Do one of the following:
a.Dial extension you want to add.
b.Place or answer an outside call.
c.Retrieve a call from Park Orbit.
4.Press CONF to set up...