NEC Dsx 34b Manual

Caller ID Logging
DSX Software ManualFeatures◆71
Features
- In  3712-03: Home Area Code Exception List Type  (page 859), specify the Home Area Code Excep-
tion List  Table  as a Toll Table (
1) or a Local Table (0).
- If it is a Toll Table, the codes you enter in the table are toll calls. All other codes are local calls.
- If it is a Local Table, the codes you enter in the table are local calls. All other codes are toll calls.
- In  3714-[01-96]: Home Area Code Exception List Table Data  (page 861)...

Caller ID Logging
72◆Features DSX Software Manual
Programming Examples
1.In 3121-01: Caller ID Type  (page 825) for each line enter the type of Caller ID required:
-  (DSP = 
1, ATRU-DB  = 2, T1/E1 ANI  = 3).
2.Set up the outbound route for Caller ID callbacks. - In  3711-01: Caller ID Callback Route Type  (page 856), select the type of route used for Caller ID 
callbacks (
1 = line, 2 = Line Group).
- For line, in  3711-01: Caller ID Callback Line  (page 856) enter the line number (
1-64) the system...

Caller ID Logging
DSX Software ManualFeatures◆73
Features
Operation
Reviewing the Caller ID LogIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To review your Caller ID log:
1.
[Calls XX]
[CLXX]Select the Caller ID log. • Your Ring/Message Lamp will wink on (green) when you have Caller ID records that you have not yet reviewed.
[View All]
[All]Select to review  all your Caller ID records.
• You see the following review options.
• Press 
Volume Up and Volume Down to scroll through your...

Central Office Calls, Answering
74◆Features DSX Software Manual
Central Office Calls, Answering
Description
The system provides  flexible routing of incoming CO calls to meet the exact site requirements.
Answering Priority
When multiple calls ring an extension simultaneously, the system services the ringing calls in the follow-
ing order:
1.Ringing Intercom call
2.Line or loop key (from lowest to highest)
Over flow
Refer to  Overflow for Key Ring Calls  (page 214) for details on the over flow options.
Single...

Central Office Calls, Answering
DSX Software ManualFeatures◆75
Features
Programming
Basic Programming
1.In 3101-01: Line Type  (page 809), set the circuit type to match the connected service.
2.In 3101-03: DTMF Dialing  (page 811), indicate whether the line is DTMF (1) or Dial Pulse (0).
3.In 3103-03: Loop Length  (page 815) for analog lines only, set this option to compensate for the telco cir-
cuits loop length. - For normal installations, enter 
0.
- If the system is very close to the central of fice...

Central Office Calls, Answering
76◆Features DSX Software Manual
Setting Up Line and Loop Keys
1.For line keys:
- In  2121-[01 to 24]: Feature Key Codes  (page 758), enter 
03.
- In  2121-[01 to 24]: Feature Key Data  (page 758), enter the line number (
1-64).
- If an extension doesn’t have any line keys, you should assign Fixed or Switched Loop keys to 
make handling outside calls easier.
2.For Fixed Loop keys:
- In  2121-[01 to 24]: Feature Key Codes  (page 758), enter 
01.
3.For Switched Loop keys:
-...

Central Office Calls, Answering
DSX Software ManualFeatures◆77
Features
Other Related Features
Features
Call Timer  (page 55)
The Call Timer helps a user keep track of the time they spend on the phone.
Direct Inward Line  (page 109)
A DIL rings an extension directly.
Line Keys  (page 227)
Line keys simplify answering outside calls.
Loop Keys  (page 233)
In order to answer outside calls, extensions without line keys should have loop keys.
Night Service / Night Ring  (page 252)
Night Service determines how...

Central Office Calls, Placing
78◆Features DSX Software Manual
Central Office Calls, Placing
Description
The system provides  flexibility in the way each extension user can place outgoing calls. A user can place a 
call by:
❥Pressing a Line Key Any keyset can have line keys for one-touch access to speci fic lines.
- See  Line Keys  on page 227 for more.
❥Pressing a Loop Key
Loop Keys provide a user with one-touch access to the assigned Loop Group. Loop Group\
s can consist 
of one or more Line Groups. - See...

Central Office Calls, Placing
DSX Software ManualFeatures◆79
Features
Default Setting
• Lines 1-12 ring on line keys 1-12 for extensions 300-315. All other extensions are lamp only for lines 
1-12. Lines 13-64 do not appear on line keys.
• All extensions have full access on all lines.
• Line Group Routing (dial 9) is assigned to Line Group 90 (which conta\
ins lines 1-8). Dial 9 works by  default. The outgoing line priority for the dial 9 group is as follows:
Order 1 = line 8
Order 2 = line 7
Order 3 =...

Central Office Calls, Placing
80◆Features DSX Software Manual
Programming
Basic Programming
1.In 3101-01: Line Type  (page 809), set the circuit type to match the connected service.
2.In 3101-03: DTMF Dialing  (page 811), indicate whether the line is DTMF (1) or Dial Pulse (0).
3.In 3103-03: Loop Length  (page 815) for analog lines only, set this option to compensate for the telco cir-
cuits loop length. - If the system is very close to the central of fice or behind a PBX, enter 
1.
- For normal...