NEC Dsx 34b Manual

Distinctive Ringing
DSX Software ManualFeatures◆141
Features
Extension Override
Using Extension OverrideIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To customize ringing for your extension’s outside calls:
1.
[Menu + Ring]
[Menu + MORE + Ring]Select the Distinctive Ringing options.
2.[Assign]
[Asgn]Select Extension Override.
3.Select the ringing mode you want to change.
[Day Ring]
[Day]Select day ring.
[Night Ring]
[Nght]Select night ring.
[Delay Ring]
[Dely]Select delay ring....

Distinctive Ringing
142◆Features DSX Software Manual
Key Ring Override
Using Key Ring OverrideIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To assign a Ring Type to a Call Coverage, Group Call Pickup, or line key:
1.
[Menu + Ring]
[Menu + MORE + Ring]Select the Distinctive Ringing options.
2.[Key]
[Key]Select Key Ring Override.
a.Select a key type to customize.
[Call Coverage]
[Cck]Select your Call Coverage keys. • Your Call Coverage keys light.
[Pickup]
[Pkup]Select your Group Call...

Do Not Disturb
DSX Software ManualFeatures◆143
Features
Do Not Disturb
Description
Do Not Disturb (DND) blocks incoming calls, Off-Hook Signaling and Paging announcements. An exten-
sion user can activate DND anytime while on a call or while their phone is idle. Once activated, incoming 
outside calls still  flash the line keys. The user may use the phone in the normal manner for placing and pro-
cessing calls.
Do Not Disturb provides the following 4 DND options: (1) Incoming outside calls blocked
(2)...

Do Not Disturb
144◆Features DSX Software Manual
Note: When transferring an outside call to an extension in DND, the Transfer will be blocked if the extension 
has enabled DND for all calls (type 3) or DND for outside calls (type\
 1). The Transfer will be allowed if the 
extension has enabled DND for Intercom calls (type 2).
Conditions
• A system reset or power failure cancels DND.
Default Setting
• Do Not Disturb enabled.
Programming
1.If yes, in  2111-01: Allow Do Not Disturb  (page 731) enter Ye s....

Do Not Disturb
DSX Software ManualFeatures◆145
Features
Message Waiting  (page 238)
An extension user can leave a Message Waiting at an extension in Do Not Disturb.
Night Service / Night Ring  (page 252)
A DIL destination activates the night mode for the DIL when they press DND.
Paging  (page 259)
DND blocks Paging announcements.
Reverse Voice Over  (page 289)
DND does not block Reverse Voice Over.
Single Line Telephones  (page 305)
Single line extensions cannot use DND.
Transfer  (page 358)
DND blocks...

Do Not Disturb Override
146◆Features DSX Software Manual
Do Not Disturb Override
Description
Do Not Disturb Override lets an extension user override another extension’s Do Not Disturb. This allows a 
priority employee (such as a supervisor or executive) to get through to a co-worker right away while the co-
worker’s phone is in Do Not Disturb. DND Override is available to all extensions that have DND Override 
set in their Class of Service. It is also available to any extension that has a Hotline key...

Door Box
DSX Software ManualFeatures◆147
Features
Door Box
Description
The Door Box (P/N 922450) is a self-contained analog Intercom unit typ\
ically used to monitor an entrance 
door. A visitor at the door can press the Door Box call button (like a door bell). The Door Box then sends 
chime tones or ringing to all extensions programmed to receive chimes. To answer the chime or ringing, the 
called extension user just lifts the handset. This lets the extension user talk to the visitor at the Door Box....

Door Box
148◆Features DSX Software Manual
Conditions
• Door Box P/N 922450 is a weather-tight unit, and can be mounted outside. It has an operating temper-
ature range of -20 to 60 degrees C (-4 to 140 degrees F) and a relative humidity of 10-95%, non-con-
densing.
Default Setting
• In DSX 80/160, no Door Boxes are enabled.
• In DSX-40, the built-in Door Box ports are enabled for extensions 326 (DOOR 1) and 327 (DOOR 2).
Programming
Basic Door Box Programming
1.In  2113-02: Ring Group  (page 738),...

Door Box
DSX Software ManualFeatures◆149
Features
2PGDAD Module Door Box Setup
1.Locate an available 16ESIU PCB digital station port (e.g., station port 10/extension 309).
- If you wait to plug in the 2PGDAD Module until  after your programming is complete, the second-
ary station port set up in the next step will auto-ID as a Door Box. The primary port always auto-
IDs as a Door Box when the 2PGDAD Module is plugged in.
2.In  1203-01: Secondary Station Port Assignment  (page 613) for the station port...

Door Box
150◆Features DSX Software Manual
DSX-40 “Built-In” Door Box Setup
1.Refer to the DSX-40 Hardware Manual  for additional details.
- DOOR 1 is extension 326.
- DOOR 2 is extension 327.
1.This programming does not apply to a Door Box connected to a 2PGDAD Module.
2.In  2101-06: Door Relay Assignment  (page 723) for DOOR 1 (326) or DOOR 2(327), assign the associ-
ated control relay. -
1 for relay CPU #1 (normally assigned to DOOR 1/extension 326).
-
2 for relay CPU #2 (normally assigned to DOOR...