NEC Dsx 34b Manual

Intercom
DSX Software ManualFeatures◆211
Features
Intercom
Description
Intercom gives extension users access to other extensions. This provides the system with complete internal 
calling capability.
Handsfree Answerback and Forced Intercom Ringing
Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by speak-
ing toward the phone, without lifting the handset. Like Handsfree, this is a convenience for workers who 
don’t have a free hand to pick up the handset....

Intercom
212◆Features DSX Software Manual
Other Related Features
Features
Attendant Position  (page 24)
Designate each extension’s operator.
Call Coverage Keys  (page 40)
A user can press a Call Coverage Key as an alternative to dialing Intercom numbers.
Call Waiting / Camp-On  (page 58)
A user can Camp-On after placing an Intercom call to a busy co-worker.
Callback  (page 61)
A user can leave a Callback request after placing an Intercom call to a busy co-worker.
Direct Station Selection (DSS)  (page...

Intercom
DSX Software ManualFeatures◆213
Features
Operation
User Programmable Feature
Placing and Answering Intercom CallsIn these instructions:[Super Display Soft Key]
[Keyset Soft Key]
To place an Intercom call:
1.
Lift handset and press INTERCOM.
2.Dial your co-worker’s extension number (300-427). • To call the operator, dial the operator’s extension number or dial 
0 or 01-04 (depending on your system setup).
• If your call voice-announces the destination, you can dial 
1 to force the call to ring....

Key Ring
214◆Features DSX Software Manual
Key Ring
Description
A Key Ring line rings an extension according to the settings in 2132-[01-64]: Line Ringing (page 764). Mul-
tiple extensions can be enabled to ring immediately or after a programmed delay\
 for each incoming line call. 
In addition, under certain conditions other types of outside calls divert to Key Ring if unanswered. The fol-
lowing conditions also initiate Key Ring:
❥Direct Inward Line An unanswered DIL diverts to Key Ring if unanswered...

Key Ring
DSX Software ManualFeatures◆215
Features
Programming
1.If yes:
- In  2132-[01-64]: Line Ringing  (page 764) enter one of the following:- 
- 
1 for day and night ringing
- 
2 for night only ringing
- 
3 for delayed day and night ringing
- For day mode Key Ring, in  3112-01: Direct Termination in the Day  (page 819) press 
CLEAR.
- For night mode Key Ring, in  3112-04: Direct Termination at Night  (page 820) press 
CLEAR.
- For delayed ringing, adjust  1604-01: Delay Ring Timer (page 678) as...

Key Ring
216◆Features DSX Software Manual
Other Related Features
Features
Call Coverage Keys  (page 40)
Call Coverage will pick up Key Ring calls.
Call Forwarding  (page 44)
A Key Ring call will not follow an extension’s Call Forwarding.
Call Waiting / Camp-On  (page 58)
A Key Ring call will not send Camp-On beeps to a busy extension that normally rings for that call.
Direct Inward Line  (page 109)
An unanswered DIL reverts to all extensions with Key Ring for the line.
Hold  (page 202)
Unanswered Hold...

Language Selection
DSX Software ManualFeatures◆217
Features
Language Selection
Description
Language Selection provides telephone displays for soft keys and system programming in English and Span-
ish. You can select the language for each extension in system programming, or the extension user can choose 
their language via the soft keys. Language Selection allows the system to easily accommodate bilingual 
installations (English and Spanish). The telephone user can have their telephone display the...

Language Selection
218◆Features DSX Software Manual
Programming
1.In 2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1401-11: Language Programming  (page 631) enter Ye s.
3.If no, in 1401-11: Language Programming  (page 631) enter No.
1.For English, in 2101-03: Station Display Language  (page 722) enter 1.
2.For Spanish, in 2101-03: Station Display Language  (page 722) enter 2.
1.For English, in 1541-03: SMDR Language  (page 666) enter 1.
2.For Spanish,...

Last Number Redial
DSX Software ManualFeatures◆219
Features
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last outside number dialed. For example, 
a user may quickly recall a busy or unanswered number without manually dialing the digits. Last Numbe\
r 
Redial saves in system memory the last 20 digits a user dials. The number can be any combination of digits 
0-9, # and *. The system remembers the digits regardless of whether the call was answered,...

Last Number Redial
220◆Features DSX Software Manual
Programming
1.In 2131-[01-64]: Line Access  (page 763), enter one of the following:
-
2 for outgoing access only
-
3 for full access
1.In  2102-01: Class of Service  (page 724), check the extension’s Class of Service level.
2.If yes, in 1411-04: Enhanced Last Number Redial  (page 648) enter Ye s.
3.If no, in 1411-04: Enhanced Last Number Redial  (page 648) enter No.
Other Related Features
Features
Account Codes  (page 14) and Save Number Dialed  (page...