Mitel Sx 50 Dpabx Instructions Guide
Here you can view all the pages of manual Mitel Sx 50 Dpabx Instructions Guide. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 641
Automatic Route Selection and Toll Control 0 CITY B: 786, * CITY A: All Office Codes * CITY c: 994. Refer to Figure 7-1, Trunking Network for details. rvi 7.4 The employees at Ace Manufacturing Company’s head office in CITY A were separated into the following Routing Classes of Service for Toll Control purposes: * Routing Class of Service 1 (Executive): The executive level can access all Trunk Groups including the international network. * Routing Class of Service 2 (Management): This level can...
Page 642
Application Example AREA CODE 204 AREA CODE 204 WATS AND WATS AND AREA CODE 416 AREA CODE 416 COMMON CARRIER COMMON CARRIER AREA CODE 305 SX-SO@ SYSTEM DD0025 9104-091-220-NA Issue 5 Revision 0 220 7-3
Page 643
Automatic Route Selection and Toll Control Complete the Digit Modification Table. This table determines which digits the system outpulses, and which digits the system absorbs. For example, if theTrunk Access Code 9 will not be outpulsed, then this table should instruct the system to absorb the leading digit 9 from any digit string. Similarly, if long-distance DDD calls are permitted, then this table should instruct the system to insert the digit 1 into the digit string, after the digit 9 has been...
Page 644
Application Example 7.6 The contents of the ARS tables have been completed in accordance with the requirements of the scenario. The order in which they were completed is the order in which they would normally be programmed. Refer to Figure 7-2(a), Table Network. 7.7 DMT Entry 001 is for calls on CO Trunks. These require the Trunk Group Access Code to be absorbed and the toll digit 1 to be inserted. DMT Entry 002 is for calls made over the FXTrunk to CITY D. The Trunk Group Access Code and Area...
Page 645
Automatic Route Selection and Toll Control e Route List Number 004 - Route 001 (FX Trunk). * Route List Number 005 - Route 001 (FX Trunk), Route 005 (OCC), Route 002 (CO Trunks). 0 Route List Number 006 - Route 001 (FX Trunk) and Route 005 (OCC). 7.10 In Command 701, only one Time Period is defined and all Routing Classes of Service are assigned the same Route List Number: 001. In Command 702, two Time Periods have been defined. For RCS 1, both Time Periods are assigned to Route List 005. For RCS...
Page 646
i “. Application Example ARS DIGIT COMPARISON TABLE (CMD 700) RCS 1 -ALL TRUNKS RCS 2 -WATS, FX, TIE, MCI RCSI-FX TRUNK GROUPS: 1 -LOCAL TRUNKS 2 -WATS 3 - FX TRUNKS 4-TIETRUNKS 5-see COMMAND 745 DD0026Rl 9 104-09 l -220~NA Issue 5 Revision 0 220 7-7
Page 647
Automatic Route Selection and Toll Control ARS ROUTE LIST TABLE (CMD. 750) Digit String Insert . \. \, 220 7-8 Revision 0 9104-091-220%NA issue 5
Page 648
I; y- R Trademark of Mite1 Corporation. opyright 1993, Mite1 Corporation. All rights reserved. Printed in Canada.
Page 649
General ............................................................... 221 l-l ReasonforReissue ...................................................... 221 1-l Brief Description ........................................................ 221 l-l Recorded Information . . . . . . . . , . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . 221 2-l Printer Requirements ..................................................... 221 3-l Printer Port Configuration...
Page 650
Station Message Detail Recording iv Revision 0 9104-091-221-NA Issue 5