Mitel Sx 50 Dpabx Instructions Guide

Automatic Route Selection and Toll Control 
ARS Digit Modification Table (Command 752) 
There is a maximum of 100 Digit Modification Table (DMT) entries. The Register Number is the 
Entry Number, which is referenced from the Route Table. Each DMT Entry defines how many 
digits are to be deleted from the dialed digit string and what digits are then to be added. (The 
first digit entered is the first deleted). 
The fields which comprise the Digit Modification Table are described below. 
DMT Entry Number:...

SX-50@ DIGITAL PRIVATE’ 
AUTOMATIC BRANCH EXCHANGE 
(DPABX) 
Addendum 
Package (MR4)  

Addendum Package 
NOTICE 
The information contained in this document is believed to be accurate in all 
respects but is not warranted by Mite1 Corporation (MITEL@). The informa- 
tion is subject to change without notice and should not be construed in any 
way as a commitment by Mite1 or any of its affiliates or subsidiaries. Mite1 
and its affiliates and subsidiaries assume no responsibility for any errors or 
omissions in this document. Revisions of this document or new editions of it 
may be issued to...

1 
’ INTRODUCTION 
General 
1.1 After the successful mechanical installation of the SX-50s system (refer to Section 
9104-091-200-NA, Shipping, Receiving and Installation Information), the system is 
ready for programming. This Section provides forms for the installer to record 
customer data. For information on programming options and access to CDE from the 
Console or Test Line, refer to Section 9104-091-210-NA. 
Reason for Reissue 
I 
1.2 Section 9106091-102-NA, Customer Data Entry Forms, has been...

Customer Data Entrv Forms 
102 l-2 Revision 0 9104-091-l 02-NA Issue 3  

1 
’ INTRODUCTION 
General 
1.1 The Documentation Index lists the MITEL Standard Practices included in the SX-508 
.DPABX Communications documentation. Each practice forms a section of the 
system documentation. A brief description of each section is given. 
Reason for Reissue 
1.2 This Section is reissued to incorporate MS55 modifications. 
The following Section is added: 
l 9104-091-I 50-NA, Ordering Information. 
9104-091-01 C+NA Issue 5 Revision 0 010 l-l  

Documentation Index 
010 l-2 Revision 0 9104-091410-NA Issue 5  

2 . 
DOCUMENTATION 
General 
2.1 The SX-50 system documentation is contained in one volume. Contents are listed in 
Table 2-l. 
Description of Sections 
2.2 The content of each Section is as follows: 
(a) 9104-091-001-NA, Control Sheet, is identified by a unique part number, and iden- 
tifies the issue of each standard practice contained. 
(b) 9104-091--Ol O-NA, The Documentation Index lists the MITEL Standard Practices 
included in this SX-50 DPABX Communications System documentation. 
(c) 9104-091-l...