Mitel Sx 50 Dpabx Instructions Guide

Features Description 
Message Register Audit 
Description When this feature is enabled, the Attendant can print out the contents of 
the Message Registers and optionally clear them. The printout consists of 
several lines. The first line is the Message Register Audit header and has 
the following format: 
MM/DD hh:mm ROOM REGISTER 
l MM/DD - month and day . 
l hh:mm - time-of-day (24-hour clock) 
l hh:mmP - time-of-day (12 hour clock, PM). 
The remaining jines are of the same format. They provide the...

Features 
Personal Outgoing Line 
Description 
I 
Conditions 
Programming 
Operation This feature enables a SUPERSET 
4, SUPERSET 410, or SUPERSETQQ 
telephone user to access a specific trunk directly via a Line Select key. This 
line can be used for outgoingcalls. 
l Conversations on the Personal Outgoing line are private, but a call on 
a Personal Outgoing line can be transferred, conferenced, swapped or 
split. 
_ 
Commands 401 + 480, SUPERSETTelephone 01 --, 80 Programming, 
Register = tine Key...

Features Descrbtion 
Pickup Groups - 
Description 
This feature assigns an extension to a Pickup Group and permits the 
extension to answer any call directed to any extension in that 
Pickup 
Group by dialing the Dial Call Pickup Access Code. 
Conditions 
l A maximum of seven Pickup Groups are permitted per system. 
l This feature cannot be originated by an extension with a call on 
Consultation Hold. In this case, if a pickup is attempted, then the 
originating extension receives reorder tone and must...

Features 
. Printer Slow Carriage Return Option (field h) must be set to 0 (Disable) 
or 1 (Output 
6 Nulls at End-of-Line). Default is 0. 
Operation 
l Connect the printer to the RS-232 Port (Printer Port) on the Control 
Card/Control Card 2 (MCC2). Refer to Section 9104-091-200-NA, 
Shipping, Receiving and Installation Information. 
To Suspend the Printer: 
l Dial the Attendant Function Access Code (71 or *) or press the 
FUNCTION key. 
_ 
l Dial Attendant Function 75 and *. 
l The printer is...

Features Description 
Privacy Release 
Description 
Several SUPERSETtelephones can have appearances of the same line. 
However, conversations on these line appearances are private; another 
set with an appearance of the same line cannot enter the conversation. If 
required, a SUPERSET or SUPERSET telephone using the line 
can permit other appearances to join the conversation by activating the 
Privacy Release feature. 
. 
Conditions 
l Privacy Release is effective only on SUPERSETline appearances. It...

Appendix A 
NOTES ON TOLL FRAUD 
General 
A.1 The SX-50 PABX Customer Data Entry (CDE) Command registers contain 
programming parameters that allow for highly customized and flexible toll restriction 
applications. However, incomplete or careless programming can allow for the 
possibility of toll fraud - unauthorized toll calls by internal or external callers. 
SX-50 
PABX systems using Direct Inward System Access (DISA), or those interfaced with 
COV or ONS based voice mail/auto attendant (J/M/AA)...

Features Description 
1 “ARS Routing” Class Of Service 
A.4 
Any device in the system that can listen to dial tone such as stations, Dial-in trunks or 
DISA trunks, should be programmed with a Routing Class of Service (KS). The 
RCS is used in the ARS time of day tables to either route or block calls depending if 
a route list is specified. If no route list is specified, the call is blocked. It is also 
possible to assign the attendant console an RCS. - 
Verified Authorization Codes 
A.5 Veriiied...

Notes on Toll Fraud 
completely toll restricted, and should have the minimal COS options enabled. Software 
- Generics MS50 and MS51 do not have the capability of returning dial tone when a 
station port hangs up. 
System Abbreviated Dial 
A.8 
In the SX-50 PABX, system abbreviated dial (speed call) can be programmed to 
bypass ARS. By default, speed call will use ARS and therefore toll restriction can be 
applied based on the digit sequence. Access to abbreviated dial is controlled by 
COS options. _...

Features Description 
105 A-4 
Revision O/August 1994 91 CM-091 -105-NA Issue 5  

2 . 
CONFIGURATION LIMITS 
General 
2.1 The SX-50 system is designed to support typical FABX applications within the 
following limits: 
Up to 160 lines, which can be . 
. ONS tines : 16 per slot, up to 160 if slots are available 
l OPS tines : eight per slot, up to 80 if slots are available 
l DNIC Lines: eight per slot, up to 32 if slots are available 
l COV tines : eight per slot, up to 64 if slots are available 
Note: The combined total number of COV and DNIC line cards must not exceed eight. 
Up to...