Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

SECTION MITL9109-094-320-NACHART 2-15 (CONT’D)
DIAGNOSTICS LEVEL: ENABLING AND DISABLING DIAGNOSTICS
StepActionVerify
8Press 7 (DISABLE-DIAGCommand line responds with:
softkey).DISABLE-DIAG
and 
softkey prompts change.
9Press 1 (BACKGROUNDCommand line responds with:
softkey).DISABLE-DIAG BACKGROUND
and 
softkeys change, as in Step 5.
10Repeat Steps 6 and 7.Background Diagnostics disable message appears in
display area. The selected diagnostics are disabled.
Softkey prompts return to Diagnostics Level...

System Test Procedures
CHART 2-16
REMOVING EQUIPMENT FROM AND RETURNING EQUIPMENT TO SERVICEtepActionVerify
1Access MAINTENANCE
System responds by displaying Maintenance menu.
application.
2Press 3 (DIAGNOSTICSSoftkey prompts change. Diagnostics Level is accessed.
softkey).
3Press 0 (MORE-KEYSSoftkey prompts change.
softkey).
4Press 3 (BUSY-OUTCommand line responds with:
softkey).BUSY-OUT
and 
softkey prompts change.
5Select qualifier, by pressing System prompts for input, and no softkey prompts are...

SECTION MITL9109-094-320-NACHART 2-17
STOPPING PRINTER TESTS
StepActionVerify
1Access MAINTENANCESystem responds by displaying Maintenance menu.
application
2Press 3 (DIAGNOSTICSSoftkey prompts change. Diagnostics Level is accessed.
softkey).
3Press 9 (STOP-TESTSoftkey prompts change.
softkey).
4Press 9 (PRINTERS softkey). command line responds with:
STOP-TEST PRINTERS
5Press 5 (CANCEL softkey)or 0 (ENTER softkey).
Page 28 

System Test Procedures
Traffic Measurement2.18The Traffic Measurement Level (accessed from the Maintenance
menu of the Maintenance Terminal) allows the user to SET and
SHOW, Traffic Measurement parameters, and PRINT and READ Traffic
Measurement reports from the Maintenance Terminal. Chart 2-16
shows the steps for testing the Traffic Measurement Level.
CHART 2-18
TRAFFIC MEASUREMENT
StepActionVerify
1Access MAINTENANCESystem responds by displaying Maintenance menu.
application.
2Press 5 (TRAFFIC...

SECTION MITL9109-094-320-NACHART 2-18 (CONT’D)
TRAFFIC MEASUREMENT
StepActionVerify
9Press 0 (ENTER softkey).Command line clears, and display area displays Traffic
Measurement status, measurement units, period, duration,
autoprint 
statks, and condensed report status. Softkeyprompts return to Traffic Measurement Level format.
10Press 3 (PRINT softkey).Command line responds with:
PRINT TRAFFRPT ALLand 
softkey prompts change.
11Press 0 (ENTER softkey).Command line clears, softkey prompts return to...

System Test Procedures
CHART 2-18 (CONT’D)
TRAFFIC MEASUREMENTStepActionVerify
15Press 1 (TRAFFRPT softkey). Command line responds with:
STOP TRAFFRPTand 
softkey prompts change.
16Press 0 (ENTER softkey).Command line clears, STOP TRAFFRPT message appears in
display area, traffic reports are halted, and 
softkeyprompts return to Traffic Measurement Level format.
17Repeat Step 14.
18Press 3 (PRINT softkey).Command line responds with:
STOP PRINT TM
and 
softkey prompts change.
19Press 0 (ENTER...

SECTION MITL9109-094-320-NALogs
2.19The Logs Level (accessed from the Maintenance menu of the
Maintenance Terminal) allows the user to read, print, and delete
maintenance log entries made by the system. Log entries consist of
anythirg which affects the functioning of the system, such as failed
circuits, removed or installed cards, and Bay resets. Chart 
2-19 shows
the steps for testing the Logs Level.
CHART 2-19
LOGS LEVEL
StepActionVerify
1Access MAINTENANCE
System responds by displaying Maintenance...

System Test Procedures
CHART 2-19 (CONT’D)LOGS LEVEL
StepAction
Verify
7Repeat Steps 3 and 4.As in Step 4.
Go to Step 8.
8Press 2 (OFF softkey).Command line responds with:
SET AUTOPRINT LOGS OFFand 
softkey prompts change.
9Press 0 (ENTER sof-tkey).Command line clears, SET AUTOPRINT LOGS OFF message
appears in display area, and 
softkey prompts return to
Logs Level format. Autoprint is disabled.
10Press 2 (READ softkey).Command line responds with:
READ LOGSand 
softkey prompts change.
11Select READ LOGS...

SECTION MITL9109-094-320-NACHART 2-19 (CONT’D)
LOGS LEVEL
StepActionVerify
15Generate a log entry by
extracting then re-installing
a 
vo.ce card. DO NOT
extract any of the
following:
@Main Control Card
l Digital Interface Cards
l Peripheral Control Cards
l Scanner Cards
l Bay Control Card@Switch Matrix Card
Repeat Steps 13-15,Command line responds with:
selecting NEWEST as the
READ LOGS NEWEST 002READ LOGS qualifier, and
when instructed enter 002and 
softkey prompts change.
to read the two newest log...

System Test Procedures
CHART 2-19 (CONT’D)LOGS LEVELVerify
Step
19
20
21
22
23
24Action
Press 0 (ENTER 
softkey).NOTE: Printing of logs can
be halted at any time by
pressing 9 (STOP 
softkey)and 0 (ENTER softkey).
Press 4 (DELETE softkey).
Select DELETE LOGSqualifier by pressing either
1 (NEWEST 
softkey)or
2 (OLDEST 
softkey)or
3 (ALL 
softkeys)Enter number of entries to
be deleted. NOTE: Once
deleted, entries cannot be
recovered. If a record of
log entries is required,
print logs to be deleted,
prior...