Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

SECTION MITL9109-094-320-NACHART 3-3 (CONT’D)
TESTING LINE LOCKOUT ALARM
StepActionVerify
14While a lockout alarm isAll other consoles stop their long-short-long cadence and
active, exit from aresume any other cadence that may be active.
maimenance or CDE user
intetface at a consoleThe user at this donsole is prompted for 3 seconds to
(time-out or log out).press SHOW LOCKOUT after which the display is returned
to the application state and all other consoles start the
long-short-long cadence again at...

System Test Procedures
4. STATION FEATURE TESTSGeneral
4.01This Part describes the station tests for the SX-200 DIGITAL
PABX. These tests are performed prior to the PABX being
brought into service in order 
tc verify the correct operation of the
stations and the features associated with them. Refer to Section
MITL9109-094-105-NA, Features Description, for details of the features
tested.
4.02Some of the features may be COS-restricted. Consequently, not
all features may be accessed from all stations. Refer...

SECTION MITL9109-094-320-NAStepActionCHART 4-l
ABBREVIATED DIAL
Verifv
1
2Station “A” lifts handset.Station “A” receives dial tone.
Station “A” dials the
Abbreviated Dial Access
Code and number.
3 1 Return handset.Test complete.
StepActionVerify
1
2Station “A” lifts handset.Dial tone is returned.
Station “A” dials station “B’
directory number.
3Station “B” lifts handset.
4Station “A” flashesStation “A” receives Interrupted Dial Tone. Station “B”
switchhook.receives silence (Consultation Hold).
5Station...

System Test Procedures
CHART 4-3
CALL FORWARDING (ALL TYPES)StepActionVerify
CALL FORWARDING 
- BUSY
Part 1- Testing activation of Call Forwarc’ing -. Busy
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials CallDial Tone removed on first digit of access code dialed.
Forwarding 
- Busy accessDial Tone returned after station “C” directory number has
code, followed by stationbeen entered. (Call Forwarding 
- Busy activated.)
“C” directory number, then
sets handset on-hook.
3Station “A” stays...

SECTION MlTL9-7 09-094-320-NACHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)
StepActionVerify
CALL FORWARDING 
- NO ANSWER
Part 1 -Testing activation of Call Forwarding - No Answer
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials CallDial Tone removed on first digit of access code dialed.
Forwarding
- no AnswerDial Tone returned after last digit of station “C” directory
Access Code, followed bynumber. (Call Forwarding 
- No Answer activated.)
station “C” directory
number, then sets...

System Test Procedures
CHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)StepActionVerify
CALL FORWARDING 
- BUSY/NO ANSWER
Part 1 
-Testing activation of Call Forwarding - Busy/No Answer
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials CallDial Tone removed on first digit of access code dialed.
Forwarding 
- Busy/NoDial Tone returned after last digit of Station “C” directory
Answer access code,number. (Call Forwarding 
-Busy/No Answer activated.)
followed by Station “C”
directory number,...

SECTION MITL9109-094-320-NACHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)
StepActionVerify
CALL FORWARDING - FOLLOW ME
Part 1
- Testing activation of Call Forwarding - Follow Me
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials CallDial Tone removed on first digit of access code dialed.
Forwarding 
- Follow MeDial Tone returned after station “C” directory number has
Access Code, followed bybeen dialed. (Call Forwarding 
- Follow Me activated.)
station “C” directory
number, then sets...

System Test Procedures
CHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)StepActionVerify
CALL FORWARDING 
- I’M HERE
Par,: 1- Testing activation of Call Forwarding - I’m Here
1Station “B” lifts handset.Dial Tone returned.
2Station “B” dials CallDial Tone removed on first digit of access code dialed.
Forwarding 
- I’m HereDial Tone returned after station “A” directory number
Access Code followed bydialed. (Call Forwarding 
- I’m Here activated.)
station “A” directory
number, then sets handset
on-hook....

SECTION MITL9109-094-320-NACHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)
StepActionVerify
CALL FORWARDING - EXTERNAL
Part 1
- Testing activation of Call Forwarding - External
1At Attendant Console,Refer to Section MITL9109-094-315-NA, Attendant
program a number external Console Description, for information regardingto the PABX as an
programming of Abbreviated Dialing numbers at the
Abbreviated DialingAttendant Console.
number.
2Station “A” lifts handset.Dial Tone returned.
3Station “A” dials a CallDial...

System Test Procedures
CHART 4-3 (CONT’D)
CALL FORWARDING (ALL TYPES)StepActionVerify
CALL FORWARDING 
- EXTERNAL
Part 2 
-Testing Deactivation of Call Forwarding - External
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials any callDial Tone removed on first digit of access code dialed.
Forwarding Access Code,(Call Forwarding deactivated.)
then sets handset on-hook.
3Station “B” lifts handsetStation “A” rings. Station “B” receives Ringback Tone.
then dials station “A”
directory number....