Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

SECTION MITL9109-094-320-NACHART 4-16
HUNT GROUPS (TERMINAL)
Note:Stations “A”,“B” and “C” are assumed to be in a terminal hunt group, in the indicated
order.StepActionVerify
/-
Part 1- Testing Hunt Group Operation.
1Station “D” lifts handset.Dial Tone returned.
2Station “D” dials HuntStation “A” rings. Station “D” receives Ringback Tone.
Group Access Code.
3Station “A” answers.Stations “A” and “D” are connected,
4Set handsets on-hook.
5Repeat Steps 1 through 3.As above.
6Set all handsets on-hook.Part 1...

System Test Procedures
CHART 4-17
LINE LOCKOUT (WITHOUT LINE LOCKOUT ALARM ENABLED)
StepActionVerify1Station “A” lifts handset.Dial Tone returned.
2Station “A” remainsDial Tone changes to Reorder Tone.
off-hook.
3Station “A” continues toReorder Tone replaced by silence. Station “A” is locked
remain off-hook.out. If COS Option 227, Lockout Alarm Applies is enabled,
a minor alarm is reported at the Attendant Console.
4Station “B” lifts handset.Dial Tone returned.
5Station “B” dials station “A” Busy Tone...

SECTION MITL9109-094-320-NAStation Conference
4.10For this test, ensure that COS Option 302, Flash-in Conference,
is enabled, and that COS Option 224, Flash For Attendant, is
disabled in the Class of Service for the test stations.
CHART 4-18
STATION CONFERENCE
StepActionVerify
1Station “A” lifts handset.Dial Tone returned.
2Station “A” dials station “B” Station “B” rings. Station “A” receives Ringback Tone.
directory number.
3Station “B” lifts handset.Station “A” and station “B” are connected together....

System Test Procedures
CHART 4-19
STATION-TO-STATION CALLStep
StepAction
Station “A” lifts handset.
Station “A” dials station “B
directory number.Dial Tone returned.
Dial Tone removed on first digit dialed. 
Ringback Tone
returned when dialing completed, if station “B” is on-hook.
(If station “B” is off-hook, Busy Tone returned to station
“A”.)Station “B” lifts handset.Station “A” and station “B” are connected together.
Set handsets on-hook.Test completed.Verify
CHART 4-20
STATION TRANSFER
ActionVerify...

SECTION MITL9109-094-320-NAPage 70 

System Test Procedures
5. ATTENDANT CONSOLE TESTSGeneral
5.01This Part provides a series of tests to verify the operation of
the SX-200 DIGITAL PABX Attendant Console. Refer to Section
MITLSIOS-094-315-NA, Attendant Console Description, and Section
MITLSI 09-094-l 05-NA, Features Description, for details on the fea-
tures tested in this Part.
The features tested in this Part are:
Answering Calls
Originating Calls
Call Hold and Retrieve
RecallSerial Call
Attendant-Controlled Conference
Abbreviated Dial
Do...

SECTION MITL9109-094-320-NACHART 5-l
ANSWERING CALLS
StepActionVerify
Part 1- Internal Source
1Station “A” lifts handset.Station “A” receives Dial Tone:
2Station “A” dials theDial Tone removed from station “A” and replaced by
Attendant access code.
Ringback Tone. Attendant Console warbler sounds, and
ANSWER LED flashes. INTERNAL 
softkey appears. Call
Waiting indicator 
(Cnlv) shows one call waiting.
3Attendant presses theRingback Tone removed from station “A”. Warbler stops.
ANSWER key.Call Waiting...

System Test Procedures
CHART 5-2
ORIGINATING CALLSStepActionVerify
1Attendant dials station “A”Digits appear on LCD display in DST area as they are
directory number.dialed. ANSWER LED lights. No 
softkey labels are
displayed. Station “A” rings. Station “A” data is displayed.
MSG WAITING and CALLBACK 
softkeys are displayed. DST
area shows the message RINGING. Attendant Console
receives 
Ringback Tone.
2Station “A” answers.Station “A” stops ringing. Ringback Tone removed from
Attendant Console. NO 
DISTB...

SECTION MITL9109-094-320-NACHART 5-3
CALL HOLD AND RETRIEVE
StepActionVerify
1Station “A” lifts handset.Dial Tone returned.
2Station “A” jials Attendant See C1rat-t 5-l.
Access Code.
3Attendant presses HOLD 1Station “A” receives Music On Hold, if provided, or silence.
key.The SRC area of the Attendant Console LCD is blanked.
HOLD 1 LED is on. ANSWER LED is off.
4Wait the time-out period.HOLD 1 LED flashes. Warbler sounds with Attendant
Console Recall Tone (one burst of tone for HOLD slot 1).
5Press HOLD...

System Test Procedures
CHART 5-4RECALL
StepActionVerify
1Perform Steps 1 through 3 See Chart 5-l.
of Answering Calls 
- Part 1
(Internal).
2Attendant dials station “B”Station “B” rings. Station “A” receives Ringback Tone.
directory number, thenAttendant Console returns to idle condition.
presses RELEASE.
3Allow station “B” to ringAttendant Console rings. ANSWER LED flashes. Station “B”
until recall timer causesstops ringing. RECALL 
softkey appears on Attendant
recall.Console LCD.
4Press ANSWER key...