Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Customer Data Entry (CDE)g-PRINT: This softkey transmits the contents of the selected print
option to an output device (printer or terminal). Pressing the PRINT
softkey blanks the softkey display (except for the ABORT softkey) for
the duration of the print operation. When completed, the system dis-
plays CDE DATA PRINT OPTION XX HAS COMPLETED PRINTING where
XX is the Print Option number. The 
softkey display returns to the
original format (refer to Table 4-50, Form 32 
- Customer Data Print).
O-ENTER:...

SECTION MITL9109-094-210-NAForm 33 
- Account Code Entry
4.139 This form specifies the Account Codes in the database. If the
Account Codes are verified, they are stored in the Account
Code database. Refer to Table 4-52, Form 33 
- Account Code Entry for
the form layout. Refer also to Section 
MITL9109-094-221-NA, Station
Message Detail Recording (SMDR). Note that this form can only be
accessed if System Option 05, Verified Account Codes is enabled (refer
to Form 04, System Options/System Timers).
TABLE...

Customer Data Entry (CDE)
for the tenure of the call. Upon call completion, the caller’s original
COR number is restored. If there is no specified COR number, then the
caller’s original COR number is used for the call.
ACTIVE: This field specifies which Account Codes can be accessed (as
marked by the ACTIVE prompt) and which Account Codes are denied
access (as marked by the INACTIVE prompt).
4.141 Commands
1 -ACTIVE/INACTIVE:This softkey has two functions. Pressing the
ACTIVE 
softkey sets the selected...

SECTION MITL9109-094-210-NA
softkey appears after a programming error. It is accompanied with an
error message on the command line. Refer to Table 5-1, Programming
Error Messages for a list of these error messages.
‘I-DELETE RANGE: Pressing the DELETE RANGE 
softkey displays the
FIRST ACCOUNT CODE TO DELETE: prompt on the command line. After
an Account Code has been entered, the display returns the LAST
ACCOUNT CODE TO DELETE: prompt. The deletion is completed by
entering an Account Code. All Account...

Customer Data Entry (CDE)
Form 34 -Directed IO
4.142 This form allows the user to specify the printers available in thesystem. Printouts and printout types will also be defined for
each printer, as well as designating whether the printout is guaranteedor not (will or will not print.) Data outputs such as Traffic 
Maasure-ment, SMDR, Hotel/Motel can be routed to any data port with an
asynchronous 
DATASET. If no new point is specified, printouts con-
tinue to default to the system printer RS-232 port. If...

SECTION MITL9109-094-210-NAPRINTOUT TYPE: This field lists the type of printout provided for each
data output such as Autoprint, Directed and Monitor. Values in this
field are entered through softkeys. The softkeys displayed will depend
upon the data output programmed in the PRINTOUT field. The following
is a list of available 
sof-tkeys as determined by the PRINTOUT field.
PRINTCUTMaintenance LogsAUTOPRINT, DIRECTED, MONITOR
Traffic MeasurementAUTOPRINT, DIRECTED
SMDRAUrOPR I NTCDE Data PrintD I...

Customer Data Entry (CDE)
4.145 Commands: Add Mode
l-PRINTER PORT: This softkey appears when the cursor is positioned
on the EXT NUM field. The programmer can enter a valid 
DATASETnumber or press the PRINTER PORT 
softkey to enter Printer Port in the
EXT NUM field.
6-QUIT: Pressing the QUIT softkey exits Add- Mode.
O-ENTER: The ENTER 
softkey appears when the programmer has
supplied sufficient information to make -an entry in the database.
The following 
softkeys appear when the programmer moves the...

SECTION MITL9109-094-210-NA
9-PMS: This softkey appears only if Property Management System is
enabled in the CDE System Options/System Timers form. When the
programmer presses the PMS 
softkey, “PMS Port” appears in the
PRINTOUT field the AUTOPRINT 
softkey appears. Pressing the AUTO-PRINT 
softkey completes programming of the PMS port.
After the programmer has selected the desired Printout in the PRINT-
OUT field and moved the cursor to the PRINTOUT TYPE field, the
following 
softkeys appear:...

Customer Data Entry (CDE)
Form 35 - Global Find Access Code
4.146 This form lists the access codes in the CDE database, including
ARS Leading Digits. Callback Busy and 
Fxecutive Busy Override
are excluded, as they can only be dialed when receiving busy tone.
This form exists to provide access code information conveniently to
the user. Codes can be assigned, modified or deleted only in the
appropriate forms.
TABLE 4-54
FORM 35 
- GLOBAL FIND ACCESS CODE
II:01 PM 15-JAN-88CDE TERMINAL DISPLAY
alarm status...

SECTION MITL9109-094-210-NA4.148 Commands
4-TOP: Pressing the TOP 
softkey places the line pointer to the first
line of the form. The command line displays the first line.
5-BOTTOM: Pressing the BOTTOM 
soitkey places the line pointer to
the last line of the form. The command line displays the last line.
6-QUIT: Pressing the QUIT 
softkey exits Form 35 and returns the
display to the level where forms are selected. This 
softkey can also be
used to exit a search for an access code.
6-CANCEL: This 
softkey...