Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Customer Data Entry (CDE)
with an error message. Refer to Table 5-1, Programming Error Mes-
sages for a list of these error messages.
‘I-PROFILE NUM:When this softkey is pressed the command line
displays “ENTER PROFILE NUM:“.After entering a valid number and
pressing the ENTER 
softkey, the screen will display the list of users of
that DTE Profile, if any.
O-ENTER: Since this form reviews the programmed data, pressing the
ENTER 
softkey completes a request for viewing a particular profile
number. No...

SECTION MITL9109-094-210-NAForm 30 
-Device Interconnection Table
4.127 This form specifies which devices may be connected together.
Refer to Table 4-47, Device Interconnection Table. The system
allows for a maximum of 25 devices.
4.128 Field Description:Initially, the system interconnects all de-
vices except trunks. The asterisk 
(*) character indicates the
device the row represents is allowed to connect to the device the
column represents. When the system inhibits device interconnection, it
is...

Customer Data Entry (CDE)
exits Form 30 and returns the display to the level where the forms are
selected. The change is not saved. Refer to Table 4-2, Available Forms.
B-CANCEL: Pressing the CANCEL softkey cancels the tenant number
entry. This 
softkey appears after a programming error. It is accom-
panied with an error message on the command line. Refer to Table
5-1, Programming Error Messages for a list of these error messages.
‘I-INTERCON NUM: The INTERCON NUM softkey allows a user to
select a device...

SECTION MITL9109-094-210-NAReview List for Form 30
4.130 This form appears when the REVIEW 
softkey is pressed in De-
vice Interconnection Table Form. When entered from Form 30,this form displays a list of the device types. Refer to Table 4-48,
Review List for Form 30 for the form layout. Note that the data in this
form cannot be modified.TABLE 4-48
REVIEW LIST FOR FORM 30
CDE TERMINAL DISPLAY
7:50 AM 15-JAN-88alarm status = NO ALARM
ENTRY 
NlADEVICE TYPE DESCRIFTl(3NINTERCOMUECT Nlhl
01Station/Set1...

Customer Data Entry (CDE)
4.132 Commands
2-ENTRY NUM: This softkey selects an entry number. Pressing the
ENTRY NUM softkey displays the ENTER ENTRY NUM: on the command
line. The selection is completed by entering a valid entry number (1 to
25).4-TOP: Pressing the TOP 
softkey moves the iine pointer to the first
line of the form. The command line displays the first line.5-BOTTOM: Pressing the BOTTOM 
softkey moves the line pointer to
the last line of the form. The command line displays this line.6-QUIT:...

SECTION MITL9109-094-210-NA MForm 31
- System Abbreviated Dial Entry
4.133 This form specifies System Abbreviated Dial numbers. Refer to
Section MITL9109-094-223-NA, Abbreviated Dialing for details.TABLE 4-49
FORM 31
- SYSTEM ABBREVIATED DIAL ENTRY
7:50 AM 15-JAN-88CDE TERMINAL DISPLAY
alarm status = NO ALAWlINDEX 
NLMBERDIGIT STRINGPRIVATE
2283679657759221221232240667
II123I5922122
l-2-FIND INDEX3- INSERT4-TOPB-BOTTOM
6-QUIT7-8-DELETE9-PR I VATEO-ATTENDANT CONSOLE DISPLAYPRIVATE
PR I VATEDIGIT STRING...

Customer Data Entry (CDE)
mum of three digits).3-INSERT: This softkey adds new digit strings to this form. Pressing
the INSERT 
softkey clears the command line and moves the cursor to
the INDEX NUMBER field. The addition is completed by entering a valid
index number and digit string. The system inserts the addition in
nrlmerical ascending order according to the “INDEX NUMBER field. Note
that if there is no data in this form or the line pointer is pointing to the
last line of data, then this 
softkey does...

SECTION MITL9109-094-210-NAForm 32 
-Customer Data Print
4.136 This form lists all the Customer Data options that can be sent
to an output device, such as a printer or a terminal. The optionsare selected by Print Option Number. Note that this form cannot be
modified. Refer to Table 4-51, Customer Data Print Options for a
complete list of these options and to Table 4-50, Form 32 
- Customer
Data Print for the form layout. Note, Print Options with 
‘ldrrr are sub-
forms of the preceding form.TABLE 4-50...

Customer Data Entry (CDE)
TABLE 4-51
CUSTOMER DATA PRINT OPTIONS
Print
Opt ionCDE Data Print31
32
33
34
35
36
:;3939”
10
11
1;
*
13
13”
1:16 .
17
18
19
20
;:23
24
25
26
26*27
26
ES30
i:*32
33
34
xi37
ii39’
4040*414242’
43
44
50System Configuration
Feature Access Codes
CDS Definition
System Options/System Timers
Tenant Interconnection Table
Tenant Night Switching
Console Assignments
Attendant LDN Assignments
Station/SUPERSET TelephonesSUPERSET/Li ne Appearances
Pickup Groups
Data Circuit Descriptors
Data...

SECTION MITL9109-094~Zl O-NAexception of the QUIT softkey).
Further CDE is prohibited while the command PRINT ALL is in effect.
The command line sequentially prompts the user to enter the desired
ranges for options. The 
softkey ENTER must be pressed after each
entry. The following lists the Data Print options:
PRINT FROM COS START: TO COS END
PRINT FROM TRK CCT DESC START: TO 
IRK CCT DESC END
PRINT FROM DATA CCT DESC START: TO DATA CCT DESC END
PRINT FROM 
DIE PROFILE START: TO DTE PROFILE NUM. ENDWhen...