Mitel SX 200 DIGITAL Pabx Shipping, Receiving, And Installation Information Manual

Customer Data Entry (CDE)
Form 24 - ARS: Route Lists
4.99This form specifies the order that the Route numbers are se-
lected. There are 100 Route List numbers; each Route List num-ber accommodates a maximum of six Route numbers. Refer to Table
4-38, ARS: Route Lists for the form layout.TABLE 4-38
FORM 24 
- ARS: ROUTE LISTS
CDE TERMINAL DISPLAY
7:50 AM 15-JAN-88
alarm status = NO ALARM
LIST 
NLhlFIRST SECOND WI-TI-IIFD WI- FOURTH WTFlFiH Wl SIXTH W-l
0192ON
8:3
8:06
07
8:101112
0132
ON...

SECTION MITL9109-094-210-NA4.101 Commands
4-TOP: Pressing the TOP 
softkey moves the line pointer to the first
line of the form. The command line displays the first line.
5-BOTTOM: Pressing the BOTTOM 
softkey moves the line pointer to
the last line of the form. The command line displays this line.
6-QUIT: Pressing the QUIT sof-tkey when editing this form returns the
display to the level before the field was modified. The change is not
saved. At all other times, pressing this 
softkey exits Form 24 and...

Customer Data Entry (CDE)
Form 25 - ARS: Route Plans
4.102 This form assigns the Route Lists to the time and day zones.
There are 18 time zones (six for each day zone). Each time zone
has a start time that can be set by the installer. The last specified start
time creates a time period from its start time to the first specified start
time of that day zone. If a time zone has no assigned Route List
number, then all calls during that time period are restricted from this
Route Plan. There are a maximum of...

SECTION MITL9109-094-210-NA4.104 Commands
6-QUIT: Pressing the QUIT 
softkey when editing this form returns the
display to the level before the field was modified. The change is not
saved. At all other times, pressing this 
softkey exits Form 25 and
returns the display to the level where the forms are selected. Refer to
Table 4-2, Available Forms.
B-CANCEL: This 
softkey appears after a programming error has oc-
curred. Pressing the CANCEL 
softkey returns the display to the level
where the programming...

Customer Data Entry (CDE)
Form 26 - ARS: Digit Strings
4.105 This form (and its nested form) link the digits dialed by the user
to the appropriate Route, Route List or Route Plan. It selects therelevant Route (if there is only one route), or Route List (if there is
more than one route and the time of day is not important), or Route
Plan (if the choice of routes vary with the time of day) by the 
user-dialed digits. Refer to Table 4-40, ARS: Digit Strings for the form
layout. Refer to Section...

SECTION MITL9109-094-210-NAcannot dial the specified leading digit(s). If this field is left blank, then
every COR Group can access the specified leading digit(s).
4.107 Commands
1 -YES/NO:This 
softkey has two functions; it enables or disables
system dial tone for each entry. Pressing the YES 
softl.ey enables the
system dial tone when that leading digit is accessed. The RETURN DIAL
TONE field displays YES and the 
softkey now displays NO . Pressing
the NO 
softkey disables the system dial tone when...

Customer Data Entry (CDE)
Form 26 - ARS: Nested Digit Strings
4.108 This form is reserved for specifying subsequent digits for eachentry in the LEADING DIGITS field of the previous form. It can
only be accessed from the previous form. Refer to Table 4-41, ARS:
Nested Digit Strings for the form layout. Refer to Section
MITL9109-094-220-NA, Automatic Route Selection and Toll Control for
details.TABLE 4-41
ARS: NESTED DIGIT STRINGS
CDE TERMINAL DISPLAY
7:50 AM 15-JAN-88alarm status = NO ALARM
DIGITS TO BE...

SECTION MITLSI 09-094-210-NAexpects an account code for that digit string entry from users with
COS Option 201 (Account Code, Forced Entry 
- Long Distance Calls)
enabled. Default condition is NO.
TERM TYPE AND NUM: This field specifies where the digit string
terminates. If there is only one route, then ROUTE is selected. If there
is more than one route, but the time of day is not important, then LIST
is selected. If the choice of routes vary with the time of day, then PLAN
is selected.
4.110 Commands...

Customer Data Entry (CDEY
6-QUIT: Pressing the QUIT softkey when editing this form returns the
display to the level before the field was modified. The change is not
saved. At 
all other times, pressing this softkey returns the display to
the previous form at the entry where the SHOW STRINGS 
softkey was
pressed.6-CANCEL: This 
softkey appears after a programming error has oc-
curred. Pressing the CANCEL 
softkey returns the display to the level
where the programming error occurred. This 
softkey appears...

SECTION MITL9109-094-210-NAForm 27 
- ARS: Maximum Dialed Digits
4.111 This form specifies the maximum number of dialed digits al-
lowed for each Class of Restriction. The purpose of this form is
to accommodate countries with open numbering plans such as Malay-sia, where it is generally not possible to determine from the leading
digits the number of digits to follow. NOTE for North America the
specified default value of Unlimited applies. Refer to Section
MITL9109-094-220-NA (ARS), for detailed...