Lucent Technologies DEFINITY PC Console Release 2.5 Users Manual

Console AdministrationIssue 2.5   October 1999  3-15 To change the Second Party Display standard currently in effect:
1. From the System Parameters screen, locate the radio-group buttons
beneath the term Second Party Display.
This setting determines whether the intended receiver information or
the dialing party information will be displayed in the Second Party
Display area (within Call Handling) on the Console Operations screen
during a multiple-party call.
2. Indicate what information should be...

Console Administration3-16   Issue 2.5   October 1999n PC Console compares each entry from the switch’s Integrated
Directory to those in the Upload File, then makes the following
changes to the Upload File:
¾ Identical entries are left intact.
¾ New entries to the Integrated Directory are added.
¾ Entries deleted from the Integrated Directory are left intact.
It requires approximately 1 minute to scan and update 100 entries in
the Upload File.
When this process is complete, your screen displays a...

Console AdministrationIssue 2.5   October 1999  3-17 ¾ Initialize translations to  You must indicate the foundation, or
“starting point” for the new interface language.  You can either:
n Highlight an existing language to copy its terms, then
modify those terms in the screens that follow; or
n Leave this entry blank, and enter brand new terms in
the screens that follow.
Regardless of which starting point you use, the new terms will
only affect your new custom language.  They will not change
the terms...

Console Administration3-18   Issue 2.5   October 19998. Click the left arrow button near the bottom of the screen.
n The Keyboard-Driven Terms window is displayed.  If you selected
an existing language to use as a starting point, its terms are copied
into this screen.  Otherwise, the terms are initially blank.
These are the short commands that the attendant uses to drive
PC Console.  Each command must be accessible using the mouse,
or by typing on the keyboard.  It is therefore necessary to also
define...

Console AdministrationIssue 2.5   October 1999  3-19 10. When you are finished making changes, click Save.  NOTE:
If necessary, you can use the left and right arrow buttons near
the bottom of the screen to cycle through the windows and
make any final changes to this interface language.
n If all required information has been provided, and no duplication
exists for the ALT- key-sequences, the screen will display a status
bar message indicating that the language has been saved, and can
now be accessed...

Console Administration3-20   Issue 2.5   October 19995. Make the appropriate changes to each of the terms on this screen:
n On the right side of the translation table, highlight the term whose
translated value is to be assigned or changed.
¾ The original term, and its translated value, appear in the lower
part of the screen.  The maximum number of characters that
the translated value may contain is displayed beneath the word
“Translation.”
n Use the standard Windows editing features to position your...

Console AdministrationIssue 2.5   October 1999  3-21 n To save the newly-translated term and its ALT- key sequence,
press ENTER.
¾ The translation table is updated to reflect your change.
¾ If the ALT- sequence that you assigned conflicts with any other
term, that term must be edited to change its ALT- sequence to
remove the conflict before PC Console will allow you to save
and use the finished custom language.  Repeat Step 8 to edit
the ALT- sequence for this conflicting term.
9. When you are finished...

Console Administration3-22   Issue 2.5   October 1999 Exiting the Console Administration
AreaTo exit the Console Administration area:
1. Select Administration-Exit from the Menu Bar.
n If any changes have not been saved, you have the opportunity to
save or discard those changes, or to cancel the Exit procedure.
n The Console Administration screen is closed. 

   Directory Administration
 4  
  Issue 2.5   October 1999   4-1   Overview  The term “Directory Administration” refers to a collection of procedures.  These
are the procedures that you, as System Administrator, will use to define, and
later identify, the database information required by PC Console to communicate
with the switch.
  The tool that you will use to perform Directory Administration is called
PhoneLine MasterDirectory.  This standalone software application allows you to
create and manage...

  Directory Administration
   4-2   Issue 2.5   October 1999  The PhoneLine MasterDirectory software also enables you to automate your
update procedures.  You can pre-schedule update intervals, and determine
which routines will be performed each time.  This minimizes your daily
involvement in keeping critical database information synchronized.
  Information from the switch’s Integrated Directory can also be included in the
directories that you build using PhoneLine MasterDirectory.  Chapter 3, “Console...